Mgaxyff

Mgaxyff 6 LED Solar Power Ground Marker Lights Waterproof Outdoor Driveway Road Stud Lamp,Ground Lights, LED Ground Lights

WALMART

Mgaxyff 6 LED Solar Power Ground Marker Lights Waterproof Outdoor Driveway Road Stud Lamp,Ground Lights, LED Ground Lights

Features:This LED ground light is designed to lead vehicle and pedestrian to right direction.Viewing distance up to 500 meters, which can effectively provide the driver with safe driving direction. Solar power design, using LED as light source, energy saving and environmentally friendly. It is recharged by solar panels under sun light, automatic charging during the day, automatic lights up at night.Durable casting aluminum construction can deal with the outdoor enviing the day, automatic lights up at night.Durable casting aluminum construction can deal with the outdoor environment, durable and waterproof. Withlarge reflective light brightness. The reflective light brightness canreach 2000mcd, which is 6 times~7 times that of the ordinary spikelight, and the lamp bead is more than 6000cmd.Activelighting, not only can avoid the interference of rain and fog to thegreatest extent, but also can make the driver's line of sight get rid ofthe dependence on the car lighting, the visual distance is farther, theeffect is better.Specification:Condition: 100% Brand NewMaterial: Die-cast aluminum housing + reflective sheet + PC Solar panel: 2.5V/120MA monocrystalline siliconEnergy storage device: 1.2V/600MAH NI-MH/high temperature resistant NI-MH batteryWorkingduration: charged a day under standard light intensity, it can work for40 hours; the battery can work continuously for more than 72 hoursafter being fully chargedLight mode: flashing or constantly brightLight color: BlueLight source: 6 * 5MM super bright anti-fog LED lightsVisible distance: >500 metersIlluminance: 400-500LuxLife-span: 3-5 yearsWorking environment: -20°C ~ +70°CWaterproof: IP68Static crush resistance: >20 tonsInstallation Steps:1.Positioning: Firstly, use the ruler to determine the installationposition, ensure that the longitudinal position of each position is on astraight line, the installation distance and design requirements shallprevail, and the installation site shall be flat, dry, clean andseamless.2.Mixing glue: using dedicated A glue and B glue, A glue and B glue ratiois 1:1 (such as: 1 kg A glue, 1 kg B glue) glue must be evenly mixed,consistent color.3.Applying glue: the road surface should be cleaned during installation,the glue should be moderate, not only stick to the ground, but also donot overflow too much, about 40 grams of glue per lihgt, apply glue tothe bottom of the road sign. Clean up the road debris afterinstallation.4. Patrol: check the installed spike lights after two hours.5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.Package list:2 * Road Ground Lights read more

Products at Walmart
Better Homes and Gardens Real Estate