Pool Paint

Refine By
Glidden High Endurance Interior
$9.46

Glidden High Endurance Paint + Primer is a high quality, interior latex paint at an exceptional value and price. This low odor, Ze...ro VOC paint provides great coverage and hide while having a durable and washable finish. GLIDDEN High Endurance paint... read more

See at Walmart
Glidden High Endurance Interior
$8.52

Glidden High Endurance Paint + Primer is a high quality, interior latex paint at an exceptional value and price. This low odor, Ze...ro VOC paint provides great coverage and hide while having a durable and washable finish. GLIDDEN High Endurance paint... read more

See at Walmart
ColorPlace
$7.87

ColorPlace paint delivers a quick drying finish. Available in more than 1,000 colors, ColorPlace paint is a great value to refresh... your space. read more

See at Walmart
ColorPlace
$10.97

ColorPlace paint delivers a quick drying finish. Available in more than 1,000 colors, ColorPlace paint is a great value to refresh... your space. read more

See at Walmart
ColorPlace
$7.48

ColorPlace paint delivers a quick drying finish. Available in more than 1,000 colors, ColorPlace paint is a great value to refresh... your space. read more

See at Walmart
Glidden High Endurance Interior
$10.46

Glidden High Endurance Paint + Primer is a high quality, interior latex paint at an exceptional value and price. This low odor, Ze...ro VOC paint provides great coverage and hide while having a durable and washable finish. GLIDDEN High Endurance paint... read more

See at Walmart
ColorPlace
$8.87

ColorPlace paint delivers a quick drying finish. Available in more than 1,000 colors, ColorPlace paint is a great value to refresh... your space. read more

See at Walmart
Insl-X
$105.42

A new generation of water borne, acrylic emulsion self-priming pool paint which can be applied over most types of pool coatings in... good sound condition, as well as bare concrete (cured 60 days) or plaster surfaces. Environmentally friendly, low VOC. Can be applied to damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water. Resists mildew, algae, fresh and salt water, and sun tan oils. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Suggested uses: Interior, exterior, fresh or salf water concrete pools, baby pools, etc. Allow paint to dry for a minimum of 5 days after final coat before filling outdoor pool. If it is an indoor pool, allow 10 days drying time in well circulated air before filling pool. 1 gallon covers approximately 250 - 300 sq. ft. Semi-gloss finish. Water-based pool paint may be tinted with up to 2 oz. of universal colorants.No. WR-1010:Sheen: Semi-GlossColor: WhiteSize: GallonFormulation: Water Borne Acrylic Self PrimingApprox. Coverage: 350sq ft per galSurfaces: Concrete, Plaster PoolsPackage Quantity: 1Package Type: Can read more

See at Houzz
RAMUC Pool Paint
$50.00 $33.33

Ramuc Wood Deck Stain - Chestnut Brown 1 Gallon. For all wood decks, including above ground pool decks and hot tub wood skirts.

See at Walmart
Insl-X
$117.04

Insl-X RP Series pool paint is a rubber base coating for all new or old concrete pools. This product complies with all volatile em...ission standards outlined by the Ozone Transport Commission (less than 340gm/ltr). Insl-X RP Series pool paint provides a durable satin finish for use in residential and commercial pools. Suitable for use in fresh or salt water. Resists fading, fungus, algae, abrasion, and alkalis. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Covers approximately 450 sq. ft. per gallon. Sets to touch in 30 minutes, recoat in 24 hours. Fill pool after 7 days for outdoor pools or 14 days for indoor pools. Slowly add diluted pool chemicals for first treatment. Suggested uses: Concrete, Gunnite, Marcite, pools. Integrity of Marcite or Gunnite must be sound and solid. Do Not use on metal, fiberglass, vinyl lined pools, hot tubs, nor spas.No. RP-2723:Sheen: SatinColor: BlueSize: GallonFormulation: Rubber BaseApprox. Coverage: 450 sq ft/galSurfaces: Concrete, Gunnite, Marcite Pools OnlyPackage Quantity: 1Package Type: Can read more

See at Houzz
Insl-X
$105.42

A new generation of water borne, acrylic emulsion self-priming pool paint which can be applied over most types of pool coatings in... good sound condition, as well as bare concrete (cured 60 days) or plaster surfaces. Environmentally friendly, low VOC. Can be applied to damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water. Resists mildew, algae, fresh and salt water, and sun tan oils. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Suggested uses: Interior, exterior, fresh or salf water concrete pools, baby pools, etc. Allow paint to dry for a minimum of 5 days after final coat before filling outdoor pool. If it is an indoor pool, allow 10 days drying time in well circulated air before filling pool. 1 gallon covers approximately 250 - 300 sq. ft. Semi-gloss finish. Water-based pool paint may be tinted with up to 2 oz. of universal colorants.No. WR-1023:Sheen: Semi-GlossColor: Ocean BlueSize: GallonFormulation: Water Borne Acrylic Self PrimingApprox. Coverage: 350sq ft per galSurfaces: Concrete, Plaster PoolsPackage Quantity: 1Package Type: Can read more

See at Houzz
Insl-X
$117.04

Insl-X RP Series pool paint is a rubber base coating for all new or old concrete pools. This product complies with all volatile em...ission standards outlined by the Ozone Transport Commission (less than 340gm/ltr). Insl-X RP Series pool paint provides a durable satin finish for use in residential and commercial pools. Suitable for use in fresh or salt water. Resists fading, fungus, algae, abrasion, and alkalis. Refer to Insl-X swimming pool paint brochure for complete instructions regarding application. Covers approximately 450 sq. ft. per gallon. Sets to touch in 30 minutes, recoat in 24 hours. Fill pool after 7 days for outdoor pools or 14 days for indoor pools. Slowly add diluted pool chemicals for first treatment. Suggested uses: Concrete, Gunnite, Marcite, pools. Integrity of Marcite or Gunnite must be sound and solid. Do Not use on metal, fiberglass, vinyl lined pools, hot tubs, nor spas.No. RP-2710:Sheen: SatinColor: WhiteSize: GallonFormulation: Rubber BaseApprox. Coverage: 450 sq ft/galSurfaces: Concrete, Gunnite, Marcite Pools OnlyPackage Quantity: 1Package Type: Can read more

See at Houzz
Purdy Corp.
$4.29 $2.57

"For your next paint job, enjoy extra coverage and lasting durability with this paint roller cover from Purdy. Use this item for w...ater based, oil based paint types. The length is 9" long. This paint roller cover is ideal for semi-smooth to semi-rough... read more

See at Walmart
Accuform Signs
$25.07 $9.54

"Accuform MADM441VS Housekeeping & Hygiene Pool Signs POOL HOURS __ TO __ 7" x 10" Adhesive Vinyl"

See at Walmart
Kraft
$25.95

16" Blue Steel Pool Trowel has a 16" by 4" wide flexible blue steel blade attached to 7-58" aluminum shank. 16" Blue Steel Pool Tr...owel in stock. read more

See at Houzz
Kraft
$99.95

Chrome No Burn Pool Trowel has 16" by 3" wide extra hard chrome no burn troweling blade attached to 9-1/2" forged aluminum shank. ...Hardened chrome surface eliminates burn marks in pool plaster finish. read more

See at Houzz
Kraft
$33.95

12" Stainless Steel Pool Trowel has 12" by 3-1/2" wide Swedish stainless steel troweling blade attached to 4-3/8" forged aluminum ...shank with camel back wood handle. Swedish stainless steel is flexible and will not rust or pit. read more

See at Houzz
Doodlebug
$6.99 $6.29

DOODLEBUG-Jewels. These jewels will add a sparkly dimension to your scrapbook or card-making project. They are self-adhesive and r...ange in size from 1/4 to 3/8 inch in diameter. Available in a variety of colors (each sold separately). This package... read more

See at Overstock
Kilz Identity
$32.62

"KILZ IDENTITY Interior/Exterior Stainblocking Paint & Primer in One Satin House Paint is an ultra-premium stainblocking acrylic p...roduct with a sleek and radiant sheen. Its advanced acrylic technology delivers a high performance finish that blocks... read more

See at Walmart
Prestige Paints
$37.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. An ideal choice for formal rooms in your house, such as living rooms and dining rooms. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits because it helps hide surface imperfections, such as dents, nail holes, or patches. It is also a good choice for ceiling painting. Flat finishes often require fewer coats than semi-gloss and gloss paints and are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$35.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. An ideal choice for formal rooms in your house, such as living rooms and dining rooms. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits because it helps hide surface imperfections, such as dents, nail holes, or patches. It is also a good choice for ceiling painting. Flat finishes often require fewer coats than semi-gloss and gloss paints and are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Kilz Identity
$29.87

"KILZ IDENTITY Interior/Exterior Stainblocking Paint & Primer in One Flat Wall & Ceiling Paint is an ultra-premium stainblocking a...crylic product. Its advanced acrylic technology delivers a high performance finish that blocks stains and resists... read more

See at Walmart
Prestige Paints
$35.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. An eggshell finish is always a safe bet. It has a soft, washable look that works well in living rooms, family rooms and hallways. It gets its name from its distinctive effect that gives a painted surface the texture of an eggshell when viewed at an angle in the light. Eggshell finishes are low-gloss, but more reflective than flat sheens. Eggshell also is more easily cleaned than a flat finish and is more durable. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$47.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
KILZ Complete Coat
$4.38

KILZ COMPLETE COAT Interior/Exterior Paint & Primer in One #RD240-01 Azure Pool, 1 gal, Flat:

See at Walmart
Prestige Paints
$47.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$41.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$41.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$41.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$37.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. An ideal choice for formal rooms in your house, such as living rooms and dining rooms. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits because it helps hide surface imperfections, such as dents, nail holes, or patches. It is also a good choice for ceiling painting. Flat finishes often require fewer coats than semi-gloss and gloss paints and are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$43.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$39.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$39.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. A flat finish provides a smooth, uniform look. An ideal choice for formal rooms in your house, such as living rooms and dining rooms. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits because it helps hide surface imperfections, such as dents, nail holes, or patches. It is also a good choice for ceiling painting. Flat finishes often require fewer coats than semi-gloss and gloss paints and are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Kilz Identity
$32.62

"KILZ IDENTITY Interior/Exterior Stainblocking Paint & Primer in One Satin House Paint is an ultra-premium stainblocking acrylic p...roduct with a sleek and radiant sheen. Its advanced acrylic technology delivers a high performance finish that blocks... read more

See at Walmart
Prestige Paints
$45.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. An eggshell finish is always a safe bet. It has a soft, washable look that works well in living rooms, family rooms and hallways. It gets its name from its distinctive effect that gives a painted surface the texture of an eggshell when viewed at an angle in the light. Eggshell finishes are low-gloss, but more reflective than flat sheens. Eggshell also is more easily cleaned than a flat finish and is more durable. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$38.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. Satin finish paints are probably the most commonly used finish on both interior surfaces. As with eggshell, this finish is good for high-traffic areas like kids' rooms, hallways and family rooms. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$47.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$36.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a room's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity such as bathrooms and kitchens. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall or ceiling. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$42.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$43.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$43.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$39.99

Prestige Paints Ultra premium acrylic latex interior paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Surface Preparation: all loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper rust primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Average coverage 250-400 sq. Ft. (37 square meters) per gallon (3.78 L). dry time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: use warm water and soap. An eggshell finish is always a safe bet. It has a soft, washable look that works well in living rooms, family rooms and hallways. It gets its name from its distinctive effect that gives a painted surface the texture of an eggshell when viewed at an angle in the light. Eggshell finishes are low-gloss, but more reflective than flat sheens. Eggshell also is more easily cleaned than a flat finish and is more durable. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Prestige Paints
$40.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces i...ncluding properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3.78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method. read more

See at Amazon
Bostik
$22.72 $16.73

SuperTak Foam & Fabric Aerosol Adhesive is formulated for use in foam and fabric trade. It offers quick tack, and strong bond stre...nght with a soft glue line. It has a lace spray pattern that will reduce overspray and minimize soak-in, offering a... read more

See at Walmart
KILZ Complete Coat
$4.38

KILZ COMPLETE COAT Paint & Primer in One Interior/Exterior is a low VOC, low odor 100 percent acrylic house paint that has the bes...t features of interior and exterior paint in one convenient product. COMPLETE COAT offers excellent hide, easy application... read more

See at Walmart
Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts