Recliner Lift Chairs

Refine By
Med Lift
$949.00

If you or a loved one needs help sitting down or standing back up, a lift chair recliner offers a perfect solution as well as a se...nse of personal independence. Perfect for watching television, reading, or simply to sit back and relax. With the touch of a button the chair gently rises or reclines. The electric motor provides a smooth transition from recline to a standing position, making it ideal for persons who have difficulty getting into or out of a chair. The 1193 is a three position lift chair - upright, TV recline, and full recline. The TV recline position allows the backrest to recline about 30 degrees to a comfortable TV viewing or reading position. The full recline setting is good for resting and napping. This design features padded roll arms, a triple roll back with lumbar padding, and a chaise footrest for head to toe comfort. The power recline lets you recline automatically to any position with just the touch of a button. Also features a convenient side pocket to store magazines, newspapers, or the remote control. The 1193 is equipped with a steel lift mechanism (325-lb. weight limit) and is backed by a lifetime warranty on the lift mechanism and 2 year warranty on everything else. This model features a lifetime warranty on the frame and lift mechanism and a 2-year warranty on the remaining items. Battery Back-up System is a standard feature. This model can accommodate a person 5'2" to 6'2" tall. The backrest features a double horizontal stitch to offer additional comfort in the lumbar region. All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability.Overall Height: 41" Overall Width: 31.5" Overall Depth (closed): 41" Overall Depth (reclined): 60" Back height from seat: 23" Width between the arms: 20" Seat depth: 20" Seat height from floor: 21" read more

See at Houzz
Med Lift
$949.00

If you or a loved one needs help sitting down or standing back up, a lift chair recliner offers a perfect solution as well as a se...nse of personal independence. Perfect for watching television, reading, or simply to sit back and relax. With the touch of a button the chair gently rises or reclines. The electric motor provides a smooth transition from recline to a standing position, making it ideal for persons who have difficulty getting into or out of a chair. The 1193 is a three position lift chair - upright, TV recline, and full recline. The TV recline position allows the backrest to recline about 30 degrees to a comfortable TV viewing or reading position. The full recline setting is good for resting and napping. This design features padded roll arms, a triple roll back with lumbar padding, and a chaise footrest for head to toe comfort. The power recline lets you recline automatically to any position with just the touch of a button. Also features a convenient side pocket to store magazines, newspapers, or the remote control. The 1193 is equipped with a steel lift mechanism (325-lb. weight limit) and is backed by a lifetime warranty on the lift mechanism and 2 year warranty on everything else. This model features a lifetime warranty on the frame and lift mechanism and a 2-year warranty on the remaining items. Battery Back-up System is a standard feature. This model can accommodate a person 5'2" to 6'2" tall. The backrest features a double horizontal stitch to offer additional comfort in the lumbar region. All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. Includes Free curbside delivery. Inside delivery and assembly available for an additional fee. Overall Height: 41" Overall Width: 31.5" Overall Depth (closed): 41" Overall Depth (reclined): 60" Back height from seat: 23" Width between the arms: 20" Seat depth: 20" Seat height from floor: 21" read more

See at Houzz
MedLift
$709.00

The #1153 is a three-way reclining lift chair that is the same as the #1155 model, with the exception that it is a three-way recli...ne instead of the two-way and its maximum depth when in the fully reclined position is 68" instead of 60". Recommended height range: 5'4" to 6'0".Features:Attractive tufted backrest with a seat height from the floor of 19". Seat depth is 19.5", and width between arms is 21". Back height from seat is 25". Reclined length from back of seat to end of footrest is 37". This chair is only available in Level 1 Dawson.Magazine pouch on lower outside of recliner for added storage. The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independent lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs. It retains 99.9% of its original shape and size. Most conventional foam will shrink 10 - 15% in size over the first couple of years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally, MedLift glues a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.Seat Springs are 9 gauge Morley system, no sag springs. The springs are tied together with tie wire to make every spring work together as a seat unit. Five seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail achine. The front seat rail on the frame is larger and thicker than the competitors' products, which makes the seat much stronger and durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry. This feature makes the back retain their original shape and gives greater comfort when seated. All fabric used on the Med=Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly. Also, we make sure that before the upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame is surrounded by an extra layer of foam or micr foam to ensure long fabric life. This extra padding makes the arms, backs, front arm, etc. feel softer and more plush. The foundation of the lift chair is the base. We use the Super Sagless lift base (which is made in the USA), and is the best available. The Super Sagless base we use is the most stable base in the upright lifted position on the market today. This chair contains a Low Volt Quiet Motor.Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$709.00

The #1153 is a three-way reclining lift chair that is the same as the #1155 model, with the exception that it is a three-way recli...ne instead of the two-way and its maximum depth when in the fully reclined position is 68" instead of 60". Recommended height range: 5'4" to 6'0".Features:Attractive tufted backrest with a seat height from the floor of 19". Seat depth is 19.5", and width between arms is 21". Back height from seat is 25". Reclined length from back of seat to end of footrest is 37".This chair is only available in Level 1 Dawson.Magazine pouch on lower outside of recliner for added storage. The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independent lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs. It retains 99.9% of its original shape and size. Most conventional foam will shrink 10 - 15% in size over the first couple of years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally, MedLift glues a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.Seat Springs are 9 gauge Morley system, no sag springs. The springs are tied together with tie wire to make every spring work together as a seat unit. Five seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail achine. The front seat rail on the frame is larger and thicker than the competitors' products, which makes the seat much stronger and durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry. This feature makes the back retain their original shape and gives greater comfort when seated. All fabric used on the Med=Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly. Also, we make sure that before the upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame is surrounded by an extra layer of foam or micr foam to ensure long fabric life. This extra padding makes the arms, backs, front arm, etc. feel softer and more plush. The foundation of the lift chair is the base. We use the Super Sagless lift base (which is made in the USA), and is the best available. The Super Sagless base we use is the most stable base in the upright lifted position on the market today. This chair contains a Low Volt Quiet Motor.Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1170 series is a new 2-way reclining lift chair that features the new Level 4 Charolette fabric as a standard feature, and al...so is designed with a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a 2-button waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 4 Charolette fabric.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Hi-density seat foam is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Hi-density basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Hi-density which gives a very nice feel to the seat, while allowing all the benefits of the Hi-density base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1170 series is a new 2-way reclining lift chair that features the new Level 4 Charolette fabric as a standard feature, and al...so is designed with a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a 2-button waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 4 Charolette fabric.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Hi-density seat foam is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Hi-density basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Hi-density which gives a very nice feel to the seat, while allowing all the benefits of the Hi-density base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$709.00

The #1153 is a three-way reclining lift chair that is the same as the #1155 model, with the exception that it is a three-way recli...ne instead of the two-way and its maximum depth when in the fully reclined position is 68" instead of 60". Recommended height range: 5'4" to 6'0".Features:Attractive tufted backrest with a seat height from the floor of 19". Seat depth is 19.5", and width between arms is 21". Back height from seat is 25". Reclined length from back of seat to end of footrest is 37".This chair is only available in Level 1 Dawson.Magazine pouch on lower outside of recliner for added storage. The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independent lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs. It retains 99.9% of its original shape and size. Most conventional foam will shrink 10 - 15% in size over the first couple of years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally, MedLift glues a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.Seat Springs are 9 gauge Morley system, no sag springs. The springs are tied together with tie wire to make every spring work together as a seat unit. Five seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail achine. The front seat rail on the frame is larger and thicker than the competitors' products, which makes the seat much stronger and durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry. This feature makes the back retain their original shape and gives greater comfort when seated. All fabric used on the Med=Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly. Also, we make sure that before the upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame is surrounded by an extra layer of foam or micr foam to ensure long fabric life. This extra padding makes the arms, backs, front arm, etc. feel softer and more plush. The foundation of the lift chair is the base. We use the Super Sagless lift base (which is made in the USA), and is the best available. The Super Sagless base we use is the most stable base in the upright lifted position on the market today. This chair contains a Low Volt Quiet Motor.Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$909.00

The #1193 is one of our newest models to our line-up. It features a three-way recline with a chaise pad as a standard feature. It ...has a weight capacity of 325 lbs. This model features a two-year warranty on all components. Battery Back-up System is a standard feature. Recommended height range: 5'6" to 6'2". The backrest features a double horizontal stitch to offer additional comfort in the lumbar region.Features:This chair has a seat height of 21" from the floor and a seat depth of 20". The width of the seat between the arms is 23". The backrest height is 23" from the top of the seat. When in the reclined position, the footrest measures 21" high from the floor; and also when reclined, the depth from the back of the seat to the footboard tip is 40". This chair is available in the Level 4 Cabo fabrics and Dawson vinyl only.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (Medlift is the only lift chair that uses this top quality grade). All bolts go entirely through the wood. No lag screws are used to secure the mechanism. Mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade quality. All wood screws we use are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength and an extra rail is used across the top of the seat back to help keep the back straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat raail on the frame is larger and thicker than most competitors' products which makes the seat stronger and more durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. Also, to ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted against it. This characteristic makes the chairs, basically, sit the same for a person weighing 90 lbs. as a person weighing 300 lbs. Acella-Flex will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10-15% in size over the first few years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit, we also glue a layer of super soft on top of the foam which gives a very nice feel to the seat, while still allowing the Acella-Flex foam as the base for strength and longer life. This feature also makes the seat foam pressure reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse as lift chairs receive. A lift base must be as wide as the base of the chair, and the Super Sagless base that we use is the most stable base in the upright lifted position on the market today. This model features a low volt quiet motor.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass this testing. This model is available in five of our new Cabo fabric colorsMaterials: Fabric - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$1959.00

The #3653 is the largest lift chair we manufacture. It has a weight capacity of 600 lbs. This chair comes standard w/ two extra he...avy duty , low volt motors, & custom heavy duty reclining hardware. Two-year warranty on all components. It features a split backrest design w/ extra high density fiber. Standard features include an extra heavy duty lift mechanism w/ two motors; an extra heavy duty 3-way recline mechanism; special high density Acella-Flex foam seat poly; all steel seat spring box frame w/ heavy duty Morley spring system; extra heavy duty d-arc spring in back; extra padding on arms; two low-volt heavy duty motors w/ 1,000 lbs. of thrust; super reinforced hardwood frame.Features:Seat height from the floor is 20". Seat depth from front to back is 21.5". Width of seat between armrests measures 33". Top of arm from top of seat is 7"H. When fully reclined the overall length is 72"L. The front of the ottoman to the back of the seat measures 43". Ottoman height from the floor when raised measures 20.5"H. The backrest is 31.5" H from the top of the seat.Three-way recline is standard w/ this model. Also included are armrest & headrest covers. There is a magazine pocket on the lower outer right-hand side. Extra padding on both armrests.The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued & connected w/ steel fasteners. Uni-construction of seat-back assembly. Independent lab-tested for strength & durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best & strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight & square.The seat springs used are 8 gauge Morley system no-sag springs. Seat springs are tied together w/ tie wire to ensure that every spring works together as a seat unit. Seat springs are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger & thicker than competitors' products making the seat much stronger & durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs used are extra heavy duty d-arc springs & are also tied together w/ special tie wire for more comfort & endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. This chair is reinforced w/ extra heavy duty products.The foam used in all chairs is Acella-Flex, which was developed by Leggett & Platt for use in better upholstered furniture. Acella-Flex foam is the closest thing to a perfect seating configuration in the industry. This foam basically pushes back one pound of weight exerted against it. This characteristic makes the chairs, basically, sit the same for a person weighing 90 lbs. or a person weighing 300 lbs. Acella-Flex will retain 99.9% of its original shape & size. Most conventional foam will shrink 10-15% in size over the first few years. Med-Lift uses a speical break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit to our foam, we glue a layer of super soft on top of the Acella-Flex, thus giving a nice feel to the seat, while still having the Acella-Flex base for strength & durability. This particular model uses a special Acella-Flex seat poly for added durability.The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift bases (made in the U.S.A.) is the best available. While more expensive, it will withstand constant use & abuse that a lift chair receives. A lift base must be as wide as the base of the chair in order to be stable in the upright, lifted position. The Super Sagless base we use is the most stable in the upright lifted position on the market today. This model offers reinforcements, 2 low volt heavy duty motors w/ 1,000 lbs. of thrust & a super, reinforced hardwood frame.The fabrics used on all Med-Lift chairs meet both CAL 117 & UFAC requirements of flammability. We have an independent lab test our fabrics, foam & fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass the testing.Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasten read more

See at Houzz
MedLift
$909.00

The #1193 is one of our newest models to our line-up. It features a three-way recline with a chaise pad as a standard feature. It ...has a weight capacity of 325 lbs. This model features a two-year warranty on all components. Battery Back-up System is a standard feature. Recommended height range: 5'6" to 6'2". The backrest features a double horizontal stitch to offer additional comfort in the lumbar region.Features:This chair has a seat height of 21" from the floor and a seat depth of 20". The width of the seat between the arms is 23". The backrest height is 23" from the top of the seat. When in the reclined position, the footrest measures 21" high from the floor; and also when reclined, the depth from the back of the seat to the footboard tip is 40". This chair is available in the Level 4 Cabo fabrics and Dawson vinyl only.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (Medlift is the only lift chair that uses this top quality grade). All bolts go entirely through the wood. No lag screws are used to secure the mechanism. Mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade quality. All wood screws we use are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength and an extra rail is used across the top of the seat back to help keep the back straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat raail on the frame is larger and thicker than most competitors' products which makes the seat stronger and more durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. Also, to ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted against it. This characteristic makes the chairs, basically, sit the same for a person weighing 90 lbs. as a person weighing 300 lbs. Acella-Flex will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10-15% in size over the first few years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit, we also glue a layer of super soft on top of the foam which gives a very nice feel to the seat, while still allowing the Acella-Flex foam as the base for strength and longer life. This feature also makes the seat foam pressure reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse as lift chairs receive. A lift base must be as wide as the base of the chair, and the Super Sagless base that we use is the most stable base in the upright lifted position on the market today. This model features a low volt quiet motor.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass this testing. This model is available in five of our new Cabo fabric colorsMaterials: Fabric - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$709.00

The #1153 is a three-way reclining lift chair that is the same as the #1155 model, with the exception that it is a three-way recli...ne instead of the two-way and its maximum depth when in the fully reclined position is 68" instead of 60". Recommended height range: 5'4" to 6'0".Features:Attractive tufted backrest with a seat height from the floor of 19". Seat depth is 19.5", and width between arms is 21". Back height from seat is 25". Reclined length from back of seat to end of footrest is 37". This chair is only available in Level 1 Dawson.Magazine pouch on lower outside of recliner for added storage. The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independent lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square.Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs. It retains 99.9% of its original shape and size. Most conventional foam will shrink 10 - 15% in size over the first couple of years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally, MedLift glues a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.Seat Springs are 9 gauge Morley system, no sag springs. The springs are tied together with tie wire to make every spring work together as a seat unit. Five seat springs are in this chair, and they are correctly spaced on the spring rails by a special clip rail achine. The front seat rail on the frame is larger and thicker than the competitors' products, which makes the seat much stronger and durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not come loose. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry. This feature makes the back retain their original shape and gives greater comfort when seated. All fabric used on the Med=Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly. Also, we make sure that before the upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame is surrounded by an extra layer of foam or micr foam to ensure long fabric life. This extra padding makes the arms, backs, front arm, etc. feel softer and more plush. The foundation of the lift chair is the base. We use the Super Sagless lift base (which is made in the USA), and is the best available. The Super Sagless base we use is the most stable base in the upright lifted position on the market today. This chair contains a Low Volt Quiet Motor.Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$909.00

The #1193 is one of our newest models to our line-up. It features a three-way recline with a chaise pad as a standard feature. It ...has a weight capacity of 325 lbs. This model features a two-year warranty on all components. Battery Back-up System is a standard feature. Recommended height range: 5'6" to 6'2". The backrest features a double horizontal stitch to offer additional comfort in the lumbar region.Features:This chair has a seat height of 21" from the floor and a seat depth of 20". The width of the seat between the arms is 23". The backrest height is 23" from the top of the seat. When in the reclined position, the footrest measures 21" high from the floor; and also when reclined, the depth from the back of the seat to the footboard tip is 40". This chair is available in the Level 4 Cabo fabrics and Dawson vinyl only.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (Medlift is the only lift chair that uses this top quality grade). All bolts go entirely through the wood. No lag screws are used to secure the mechanism. Mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade quality. All wood screws we use are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength and an extra rail is used across the top of the seat back to help keep the back straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat raail on the frame is larger and thicker than most competitors' products which makes the seat stronger and more durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. Also, to ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted against it. This characteristic makes the chairs, basically, sit the same for a person weighing 90 lbs. as a person weighing 300 lbs. Acella-Flex will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10-15% in size over the first few years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit, we also glue a layer of super soft on top of the foam which gives a very nice feel to the seat, while still allowing the Acella-Flex foam as the base for strength and longer life. This feature also makes the seat foam pressure reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse as lift chairs receive. A lift base must be as wide as the base of the chair, and the Super Sagless base that we use is the most stable base in the upright lifted position on the market today. This model features a low volt quiet motor.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass this testing. This model is available in five of our new Cabo fabric colorsMaterials: Fabric - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$1959.00

The #3653 is the largest lift chair we manufacture. It has a weight capacity of 600 lbs. This chair comes standard with two extra ...heavy duty , low volt motors, and custom heavy duty reclining hardware. Two-year warranty on all components. It features a split backrest design with extra high density fiber. Standard features include an extra heavy duty lift mechanism with two motors; an extra heavy duty 3-way recline mechanism; special high density Acella-Flex foam seat poly; all steel seat spring box frame with heavy duty Morley spring system; extra heavy duty d-arc spring in back; extra padding on arms; two low-volt heavy duty motors with 1,000 lbs. of thrust; super reinforced hardwood frame.Features:Seat height from the floor is 20". Seat depth front to back measures 21.5". Width between armrests is 33". Backrest measures 31.5" from top of seat. When reclined, footrest is 20.5" and the reclined length from back of seat to tip of footrest is 43". Height of the armrest from the top of the seat measures 7".Magazine pocket on lower, outer right-hand side. Extra Padding in both Armrests. Super reinforced Hardwood frame. Armrest and head covers are standard. The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are top quality grade 5. All bolts go entirely through the wood. No lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc. have a double lockint nut, made of nylon aircraft grade quality. All wood screws used are the best and strongest available.The seat springs used are 8 gauge Morley system no sag springs. Seat springs are tied together with tie wire to ensure that every spring works together as a seat unit. Seat springs are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than competitors' products making the seat much stronger and durable. There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs used are extra heavy duty d-arc springs and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used. This chair is reinforced with extra heavy duty products.The foam used in all chairs is Acella-Flex, which was developed by Leggett & Platt for use in better upholstered furniture. Acella-Flex foam is the closest thing to a perfect seating configuration in the industry. This foam basically pushes back one pound for every pound of weight exerted against it. This characteristic makes the chairs, basically, sit the same for a person weighing 90 lbs. or a perso weighing 300 lbs. Acella-Flex will retain 99.9% of its original shape and size. Most conventional foam will shrink 10-15% in size over the first few years. Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward. As an added benefit to our foam, we glue a layer of super soft on top of the AcellaFlex, thus giving a nice feel to the seat, while still having the Acella-Flex base for strength and durability. This particular model uses a special Acella-Flex seat poly for added durability.The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse of a lift chair. A lift base must be as wide as the base of the chair to be stable in the upright, lifted position. The Super Sagless base we use is the most stable in the upright lifted position on the market today. This model offers reinforcements, 2 low volt heavy duty motors with 1,000 lbs. of thrust and a super, reinforced hardwood frame.The fabrics used on all Med-Lift chairs meet both CAL 117 and UFAC requirements of flammability. We have an independent lab test our fabrics, foam and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag or purchase the tags if our components do not pass the testing. Materials: Fiber-5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners and miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1175 series is a new 2-way reclining lift chair that features a 2 heat & vib as a standard feature, and also is designed with... a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with 2 Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 2 Encounter fabrics or Dawson Vinyl.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Acella-Flex foam, which was developed by Leggett & Platt is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Acella-Flex which gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$839.00

The #1170 series is a new 2-way reclining lift chair that features the new Level 4 Charolette fabric as a standard feature, and al...so is designed with a 325 lb. weight capacity. There is a two-year warranty on all components. This model features a more contemporary look with a 2-button waterfall backrest. Recommended height range: 5'4" to 6'0". Battery back-up is not available with Vib/Heat at this time).Features:This chair has a seat height of 19" from the floor, with a seat depth of 19.5". The backrest height from top of the seat is 25". Height of footrest when reclined is 19" from the floor. When reclined, the back of the seat to the footrest tip is 37". This chair is only available in the Level 4 Charolette fabric.Magazine pocket on lower outer right-hand side of chair.The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.Hi-density seat foam is the only foam we use. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Hi-density basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically, sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. We also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, we also glue a layer of super soft on top of the Hi-density which gives a very nice feel to the seat, while allowing all the benefits of the Hi-density base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, we have determined that the Super Sagless lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sagless base we use is the most stable base in the upright lifted position that is available in the marketplace today. This chair features a low volt quiet motor. Battery back-up is a standard feature.All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. We have independent labs test our fabric, foam, and fibers once a year to ensure that they meet correct specifications. We cannot attach the UFAC tag tag or purchase the tags if our components do not pass this testing. We also make sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush. Materials: Fiber - 5%; Foam - 10%; Fabric - 10%; Steel - 30%; Fasteners & miscellaneous - 5% read more

See at Houzz
MedLift
$1059.00

The 3555 Two-Way Reclining Lift Chair has the same look as the 2555 only with larger dimensions This chair has a weight capacity o...f 500 lbs and features the attractive button-tufted backrest It is designed for a person 5392 or taller up to 6393 read more

MedLift
$639.00

The 1155 is one of the newer models of lift chairs in the MedLift line-up that offers style and quality at an exceptional price It... comes standard with a low volt motor and battery back-up and features a two-way recline read more

MedLift
$859.00

This three-way reclining lift chair is geared towards the taller who is not in need of the wider seat width It offers all of the s...ame features as the 3053W except the width between the armrests is 21 and the height of the backrest from the top of the... read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$1059.00

The 3555 Two-Way Reclining Lift Chair has the same look as the 2555 only with larger dimensions This chair has a weight capacity o...f 500 lbs and features the attractive button-tufted backrest It is designed for a person 5392 or taller up to 6393 read more

MedLift
$1959.00

The 3653 is the largest lift chair we manufacture It has a weight capacity of 600 lbs This chair comes standard with two extra hea...vy duty otors and an extra heavy duty lift mechanism read more

MedLift
$809.00

The 2553 three-way power reclining lift chair offers you the style and technology to compliment the mobility that you are seeking ...This reclining lift chair is designed to accommodate any size individual from 5392 or taller The weight capacity is 375 ... read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$709.00

The Petite Two-Way Reclining Lift Chair is designed to be the perfect lift chair with technology to complement the mobility a peti...te person is looking for It is specifically designed and engineered to provide years of carefree operation with one simp... read more

MedLift
$989.00

This 5300 Wall-a-Way reclining lift chair is designed to be placed within 3 of the wall It features an attractive waterfall pillow...back styling for a more contemporary look It is geared towards an individual who is 5393 to 5399 Weight capacity is 275 lbs read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$859.00

The 3055 Three-Way Reclining Lift Chair offers you the same design as the 2555 however the backrest features a more contemporary s...tyle with the double horizontal stitching instead of the button-tufted style The split back features offers very good lu... read more

MedLift
$1059.00

The 3555 Two-Way Reclining Lift Chair has the same look as the 2555 only with larger dimensions This chair has a weight capacity o...f 500 lbs and features the attractive button-tufted backrest It is designed for a person 5392 or taller up to 6393 read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$709.00

The Petite Two-Way Reclining Lift Chair is designed to be the perfect lift chair with technology to complement the mobility a peti...te person is looking for It is specifically designed and engineered to provide years of carefree operation with one simp... read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$909.00

This chair offers you the same features as our regular 2553 three-way reclining lift chair however it is designed for a taller ind...ividual offering an additional 2 in height of the backrest as well as the additiional 2 in overall reclined length read more

MedLift
$859.00

The 3055 Three-Way Reclining Lift Chair offers you the same design as the 2555 however the backrest features a more contemporary s...tyle with the double horizontal stitching instead of the button-tufted style The split back features offers very good lu... read more

MedLift
$709.00

The Petite Two-Way Reclining Lift Chair is designed to be the perfect lift chair with technology to complement the mobility a peti...te person is looking for It is specifically designed and engineered to provide years of carefree operation with one simp... read more

MedLift
$709.00

The Two-Way Reclining Lift Chair offers the perfect style and technology to complement the mobility you are seeking This chair is ...designed to accommodate any size individual from petite to large and it is engineered to provide years of carefree operation read more

MedLift
$709.00

The 1153 is a three-way reclining lift chair that is the same as the 1155 model with the exception that it is a three-way recline ...instead of the two-way and its maximum depth when in the fully reclined position is 68 instead of 60 Recommended height ... read more

MedLift
$839.00

This is a new two-way reclining lift chair that features heat and two vibrators as a standard feature This model features a more c...ontemporary look with a waterfall backrest read more

MedLift
$839.00

This is a new two-way reclining lift chair that features heat and two vibrators as a standard feature This model features a more c...ontemporary look with a waterfall backrest read more

MedLift
$1705.00

The 5900 is our top of the line wall-a-way reclining lift chair designed to fit within 3 of the wall It features over-stuffed arms... and back with pillow-top armrests The seat is also contoured to offer ultimate comfort read more

MedLift
$809.00

The 2553 three-way power reclining lift chair offers you the style and technology to compliment the mobility that you are seeking ...This reclining lift chair is designed to accommodate any size individual from 5392 or taller The weight capacity is 375 ... read more

MedLift
$639.00

The 1155 is one of the newer models of lift chairs in the MedLift line-up that offers style and quality at an exceptional price It... comes standard with a low volt motor and battery back-up and features a two-way recline read more

MedLift
$639.00

The 1155 is one of the newer models of lift chairs in the MedLift line-up that offers style and quality at an exceptional price It... comes standard with a low volt motor and battery back-up and features a two-way recline read more

MedLift
$709.00

The Petite Two-Way Reclining Lift Chair is designed to be the perfect lift chair with technology to complement the mobility a peti...te person is looking for It is specifically designed and engineered to provide years of carefree operation with one simp... read more

MedLift
$809.00

The 2553 three-way power reclining lift chair offers you the style and technology to compliment the mobility that you are seeking ...This reclining lift chair is designed to accommodate any size individual from 5392 or taller The weight capacity is 375 ... read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts