Repurpose an old frame to display your favorite air plants. Just add chicken wire for the backing and use paper clips as plant hangers.

By Jenny Krane
Read step by step instructions after the video.

Air plants can make their home anywhere. Make your air plant collection the center of attention by displaying them on a DIY air plant frame. Chicken wire takes the place of glass to create the perfect hanging display to fit all of your plants.

  • Working time 1 hr
  • Start to finish 2 hrs
  • Difficulty Kind of easy
  • Involves Gluing, Spray Painting, Drilling, Cutting Wire
Advertisement

What you need

Tools

Materials

Advertisement

How to do it

Step 1 Spray Paint Frame

After you have found a frame, remove the glass and back panel. Lay the frame out on a drop cloth or piece of cardboard. Spray paint the frame with light, even strokes and cover the entire frame. Let dry according to manufacturer's instructions.

Watch
Tips For Using Spray Paint

There's a certain satisfaction in hearing the jingle of a spray-paint can and watching a stream of color transform a surface. Use these techniques to give a new attitude to just about anything.

Advertisement

Step 2 Cut And Attach Chicken Wire

Measure the height and width of the frame. Cut a section of chicken wire slightly larger than the inside opening of frame, allowing 1-2 extra inches on top and bottom. Attach the wire to the frame with staples.

Step 3 Cut Dowel

Mark and measure the width of the opening of the frame on the wood dowel. Cut two lengths of dowel to that measurement.

Advertisement

Step 4 Attach Dowels To Frame

Use wood glue to attach the dowels to back frame on the top and bottom. Then secure each dowel piece with two screws. Set drill bit depth to same length as screw so you don't drill through the front of the frame.

Advertisement

Step 5 Attach Picture Hanger

Attach a saw-tooth picture hanger to the top dowel. If the frame is heavy, place a hanger on either end of the top dowel.

Step 6 Create Plant Hangers

Make plant hangers out of paper clips. Unwind paper clips, and bend to make a hook and a rounded base. You can use pliers to bend the metal if the paper clips are made of thick wire.

Advertisement

Step 7 Hang Frame and Air Plants

Place a nail in the wall for each hanger and place frame on the wall. Then attach plant hangers from the chicken wire and place air plants. Spread the plants around the frame and try to disperse air plants by color, size, and type.

Watch
How To Grow and Care for Air Plants

Air plants grow without dirt and come in all sizes and colors. These hardy plants have become popular in the past couple years, so you can find them at almost any garden center.



Comments (2)

How difficult was this project?
judiann0909
May 6, 2018
Don't they have to have any water at all? What if your house is really dry?
maprairierose
October 21, 2018
Yes, they do need to be misted daily. Some can be periodically soaked then rehung. You'll have to get care info on each individual species. You can't just hang then ignore them.

Project Toolbar

Font Size