Make This Impressive Marble Serving Tray

Place two pieces of masking tape on opposite sides of the tile to roughly mark where the tray handles will go. Using your handle as a guide mark where to drill holes for handles. We centered ours about 1 inch from the edge of the tile. 

Insert the glass and tile bit into the drill. With a steady pressure, drill through each hole. Wipe away any dust with a damp cloth or paper towel. 

Use the wire stripper tool to cut screws down to the length. If the screws are sticking out of the tile, they will scratch whatever surface you place the tray on. Once the screws are the proper length, install handles to the top of tile with a screwdriver. 

To further protect against furniture scratches, add self-adhesive pads to the large marble tray. Gently flip the tile over and adhere a felt pad at each corner.