Dress up your deck or porch with this DIY wooden railing planter. This one is made with two DIY window boxes.

Each product we feature has been independently selected and reviewed by our editorial team. If you make a purchase using the links included, we may earn commission.
Advertisement

Looking for an easy, inexpensive way to update your front porch? This custom railing planter is your summertime solution for curb appeal that lasts all year. This DIY design can be adjusted to fit your railing and your style, unlike many store-bought options. Follow along as we show you how to build and install a simple deck rail planter.

wood porch planter box with various flowers and hanging plants
Credit: Brie Passano

How to Make a Railing Planter

Building a railing planter box is easier than you might think. In just a few hours, you'll have instant curb appeal!

Editor's Tip: Be sure to have a partner help with the installation.

Supplies Needed

  • 2 window boxes
  • Drill
  • 3/8-inch drill bit
  • Measuring tape
  • Circular saw
  • 1 x 4 x 96-inch cedar board
  • 1/2 x 1-1/2 x 96-inch cedar board
  • Wood screws
Shop Our Amazon Store for Tools and Supplies

Step-by-Step Directions

Our expert tips show you how to make a railing planter from two simple window boxes. This project can be completed in an afternoon.

Step 1: Build Window Boxes

Start by building two window boxes based on our how-to instructions. Sand and stain as desired before building the rest of the railing planter. Drill two or three 3/8-inch drainage holes in the bottom of each box.

Step 2: Measure and Cut

Measure the railing width and baluster width. Board sizes will differ according to your porch railing. Cut all pieces to length using a circular saw. The 1 x 4-inch board should be 1 inch longer than the length of the planters. Cut two side braces from the 1/2 x 1-1/2-inch cedar board. The side braces should be long enough to stretch across the bottom of the short ends of both planters, including the gap for the railing. Side braces should be cut at a 15-degree angle on both ends to match up with the window boxes.

add cleat to back of railing planter box
Credit: Dera Burreson

Step 3: Add Bottom Brace

The 1/2 x 1-1/2-inch cedar board will also be used to create a brace for each planter. Use it to cut two boards that are the same length as the planters. Add a brace to the back, bottom edge of each planter using wood screws.

Editor's Tip: The bottom brace should be thick enough that it touches the spindles that attach to the railing so the planter rests snug against the spindles. In our case, the 1/2 inch cedar board was a perfect fit. Depending on the width of your railing, this may need to be adjusted.

secure mailbox frame cap to top
Credit: Dera Burreson

Step 4: Add Top Connector

Attach the 1 x 4-inch board to the top of one window box along the back length. Make sure all edges are aligned. Pre-drill all holes before screwing together, and do not secure with glue.

c9c630005db0d9c846c08d11464685cc2fac7ce6
Credit: Dera Burreson

Step 5: Attach Side Braces

Pre-drill and screw a brace to either side of the window box with the top connector. Align the angled side to the angled bottom edge on the window box. One window box should now have both side braces, a back brace, and the top connector board attached.

inserting screw with electric drill for wood box planter
using electric drill to fasten porch wood planter

Step 6: Install on Railing

Head to the installation site with a helper. Hold the window box with the braces on one side of the railing, sliding the side braces through the balusters. Position the second window box on the other side. Attach the second window box to the side and top braces.

Comments

Be the first to comment!