BHG.com/Videos///Refinish Wood Floors

Refinish Wood Floors

Danny Lipford: How to refinish wood floors.

  • share
I'll sand it about 3 more times to get it to this look. But I've heard of people trying to use a solvent to get that adhesive off, but it kinda just likes, melts it right down into the pores of the wood, doesn't it? Right. It would've messed up the wood plus a lot of adhesive was in the cracks. We had to get it out the cracks so that it would take the stain. Okay. Now what about the cracks? I know a lot of kinds some floors like this, you'll have a few gaps, but you got a solution to that, huh? We do. What we did was we sanded the floor and got some of the pine dust off of it and mixed it with a lacquer sealer and trowed it all over the whole floor, which filled all the cracks so it would stain the same as the wood. And then we sanded and put the sealer on. Now I know that you do a lot of refinishing of hardwood floors. What do you recommend to home owners? A semi-gloss or a high gloss or a flat, what's the best? Well, I like the semi-gloss. It gives them a little bit of shine. That's what we used here. Some of the houses like to do the satin look, but I just like a little bit of a shine with it. The high gloss, of course, needs the most maintenance. Yeah, yeah. The old hardwood floors like this especially the pine, they do have a lot of color and everything in it, but is this the natural finish? No, we used a stain. It was Early American we stained this floor with to kinda tone down some of the yellow that's in the wood. Well good. Now it's through, it turned out great! And you're completely finished. Nothing left but to make sure everybody stays in their spot, huh? That's right! That's right!