" Once you got passed that, this is where a lot of the work comes in, this old paneling from the '70s here. A lot of people are considering painting paneling in their own house. Give us some tips on how to do it right."
" Sure. The first thing I'll do is wipe it clean."
" Uhuhm. "
" Come back and putty all the nail holes."
" Caulk any kind of cracks."
" Right."
" Uhuh."
" Use a 100-grit sandpaper to rough the surface up."
" Well, instead of smoothing with the sandpaper, you're actually kinda roughing it up so that you get that adhesion that you need."
" Exactly. And what I'm using here is a tinted 100% acrylic latex primer. "
" Okay."
" And that will bond to the sanded paneling. And then, it'll be ready for the finish coat."
" Finish coat."
" Well, I'll tell you that primer tainting it a little bit like that really does make a difference in terms of having that finish coat covered up very well. I know that's a great tip to go with, but I know that after you do all of that, you still have kind of a different approach on the trim."
" That's correct. Basically, what I'll do on that to prep it, same thing, sand it down."
" Uhuhm. "
" Caulk, putty, and then, in this case, the homeowner wants oil-based finish coat."
" Uhuh."
" I'll go with an oil-based primer and then put 2 coats of oil-based finish coat on."
" I see. That should really produce a pretty high gloss and if you're using oil on all of that."