BHG.com  ∕  Topics  ∕  Home Improvement  ∕  Siding  ∕  Aluminum Siding
share

Aluminum Siding

Find everything you need to know about Aluminum Siding right here

Articles

Hiring a Professional Painter or Paint Contractor

Hiring a Professional Painter or Paint Contractor

individually to look at the job and discuss the specific job details. For each surface (including trim, stucco, aluminum siding , walls, and so forth), ask what will be done to prepare it, to prime it (including what type and brand of primer

Siding Options for Your Home

Siding Options for Your Home

won't rot, dent, flake, scratch, or blister. It can become brittle in very cold weather. Metal. Steel and aluminum siding , offered in a variety of prefinished colors, comes in vertical (such as board-and-batten) and lap styles

The Importance of Quality

for the surface. Most water-base exterior paints can be used on wood and hardboard siding and trim, vinyl and aluminum siding , and most masonry. On stucco or concrete block prone to cracking, however, use an elastomeric paint. It's more

Comparing Contractor Bids

Siding: A remodeler's ideas for your home's exterior significantly affect the ultimate price. Vinyl siding or aluminum siding is cheaper than wood; wood is cheaper than brick or stone. Roofing: The remodeler's specified roofing material

More Articles

Slide Shows

Preparing Vinyl and Aluminum Siding

Preparing Vinyl and Aluminum Siding

This story show how to prepare vinyl and aluminum siding and windows for painting.

Repairing Damaged Aluminum Siding

Repairing Damaged Aluminum Siding

This story show how to repair damaged aluminum siding .

Repairing Aluminum Corner Caps

Repairing Aluminum Corner Caps

hacksaw as shown. Take care to cut only through the cap and not into the siding. Wood siding is shown, but caps on aluminum siding are similar. Use pliers to remove nails or use a nail set to pound them in. Insert the new corner caps. Where the

Anchoring the Ledger

Anchoring the Ledger

vinyl or wood siding using a circular saw with the blade set to cut just through the siding and no deeper. (For aluminum siding turn the saw blade backward.) Finish the cuts at the corners using a knife, a chisel, or tin snips. Staple on

2009 Home Improvement Challenge: Grand Prize Winner and More of Our Favorites

2009 Home Improvement Challenge: Grand Prize Winner and More of Our Favorites

covered in cedar shake shingles instead of the old aluminum siding , the windows and door are framed by appropriately but the 1925 bungalow had been covered with red aluminum siding that masked the original trimwork around windows and

Siding Price Guide

Siding Price Guide

uninstalled. Material Type: Metal What You Need to Know: Aluminum siding or steel siding comes smooth or embossed with wood insulator. Scratches on steel siding will rust. Aluminum siding can dent. Durability/Maintenance: Lasts 40 years

More Slide Shows