candy, what you're gonna do is you're actually going to use some duct tape and you're going to duct tape the envelope inside of our robot body. So I've got pretty much. That's a pretty good amount of candy in there. You can definitely see that this is a candiverous robot. So I'm gonna put this to the side, and now I'm gonna show you what to do with the arms and the legs. Super duper easy. This is dryer duct . Again, you can get this at any hardware store. So and it looks perfect for a little arm for our robot. So basically you're gonna cut the lengths that you need for the arms. You're gonna cut arms and legs, so 4 lengths of these, and these are just gonna slide right over your kid's arms like this. And then to protect the, you know, protect his arm or her arm from any sharp edges, you're gonna use the same duct tape and just kind of cover up the edge. So you're gonna make 4 of these, 2 for the arms, and 2 for the legs, but this robot needs a helmet, and here's a really easy helmet that you can make. You start out with a bike helmet and you can either spray paint it silver, or if you happen to have a silver one, just use that. And then I made this antenna here by using the clamp that came from my dryer duct , and a slinky. So what you're gonna do is you're gonna open up the clamp, and you're gonna double, actually hot glue