the closet carefully so that we can make accurate cuts on our shelf board and cleat materials. The cleats are 1 x 2's and the shelves are 1 x 12 composite shelving . Priming and painting these components outside will save time and a mess. We'd layout the location of the cleats with a tape measure and a level, then mark the locations of all of the studs, so we can firmly secure the cleats before putting in the shelf boards to complete the storage area.
nail into it with our cleats, so we know that all the shelves will be supported well. Now, if you had a situation where you really wanted to beef some shelves up some more, you could use an angle bracket. It's available at the home center that can attach right mid-span and support the shelf or, if you have some of the wood left over, like this 1 x 2, you can put it right on the