use a hot glue gun and actually stick your candy canes onto the foam wreath. So for the first layer, I'm gonna break some of them into pieces so I'd get good coverage. So, a little bit of glue on the back of this guy. Stick it right there and some on here. This is a great project to get the kids on `cause they can be unwrapping the candy canes while you're gluing them on. So you're gonna do a first layer like this and coat your entire form and then you're probably gonna do 2 layers of candy canes on top of it. And for the top 2 layers, you wanna leave your candy canes whole so you get that, the shape of the candy cane . So once you've got your entire wreath covered with all your candy canes , you need to add a little finish coat to seal it. And for this, I used a spray polyurethane. And this helps so that the candy canes don't get real sticky to the touch, but also the colors will run if it gets a little humid. So once you've