True Value USGF4-GL Painter's Select Tile Red Exterior Urethane Fortified Semi-Gloss Porch and Floor Coating, 1-Gallon

True Value Mfg. Company USGF4-GL Painter's Select Tile Red Exterior Urethane Fortified Semi-Gloss Porch & Floor Coating 1 Gallon is ideal for use on floors, concrete, porches and stairs. Dries quickly. Low odor formula. Suitable for use... in areas where ventilation is minimal. Tough, wear resistant coating. Easy soap and water cleanup. VOC less than 250 grams per liter. read more

Related Products

True Value
$33.34

Jf-1, painter's select everyday, gallon, white, interior flat latex wall paint, washable flat finish, ideal for walls & ceilin...gs, easy soap & water clean up, quick drying/non spatter formula, 15 year warranty, voc less than 50 grams per litre. read more

True Value
$27.78

JEF-T, Painter's Select Everyday, Gallon, Tint Base For Exterior Flat Latex House Paint, Durable Acrylic Flat Finish, High Hiding ...Coverage, Resistant To Mildew & Fading, Easy Soap & Water Clean Up, 15 Year Warranty, VOC Less Than 50 Grams Per Litre. read more

True Value
$118.53

Jef-9, painter's select everyday, 5 gallon, white, exterior flat latex house paint, durable acrylic flat finish, high hiding cover...age, resistant to mildew & fading, easy soap & water clean up, 15 year warranty, voc less than 50 grams per litre. read more

True Value
$147.77

JES-9, Painter's Select Everyday, 5 Gallon, White, Exterior Satin 100% Acrylic Latex House Paint, Durable Acrylic Satin Finish, Hi...gh Hiding Coverage, Resistant To Mildew & Fading, Easy Soap & Water Clean Up, 15 Year Warranty, VOC Less Than 50 Grams Per Litre. read more

Prestige Paints
$43.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

True Value
$133.69

The product is psb 5Gal WHT INT paint. Easy and simple use kit. The product is manufactured in United States.. elegant design and ...finish. read more

KILZ
$24.87

KILZ SELECT LOOK Interior/Exterior Semi Gloss Paint & Primer in One, White, 1 Gallon: Interior/exterior paint and primer in on...eDurable and scrubbable finishResists staining, cracking and peelingEasy to cleanMildew-resistant finishCoverage: up to 400 sq. ft. per gallonIdeal for interior walls, trim, doors and cabinets and exterior siding, shutters and fencingDries to the touch in 2 hours; recoat after 4 hours read more

Prestige Paints
$39.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

KILZ
$24.87

KILZ Select Look Interior/Exterior Paint and Primer in One Semi-Gloss Paint creates a lustrous finish perfect for all interior sur...faces as well as exterior doors, trim and shutters. This radiant sheen is excellent for the high-traffic areas of your home and highly resistant to moisture, making it ideal for kitchens and bathrooms too. KILZ Select Look Semi-Gloss Paint delivers a durable and scrubbable finish that will resist staining, fading, peeling and mildew for years to come. Each gallon cove read more

True Value
$42.43

True Value Mfg. Company LU1-GL Premium Easy-care White Flat Latex Wall Primer/Sealer 1 Gallon is a low odor formula. Acrylic latex... formula. Fast and easy cleanup. Apply for topcoat color consistency. Combination primer and sealer. Improves topcoat adhesion. For use on drywall, plastic, brick, stone and concrete. read more

Prestige Paints
$47.99

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$36.99

Prestige Paints Ultra Premium Acrylic Latex Interior Paint self-primes over properly prepared uncoated drywall, stucco, plaster or... previously painted interior surfaces. Ideal for living rooms, family rooms, media rooms, bedrooms, dining rooms, and hallways. On stained or glossy surfaces use a stain blocking primer sealer. Certain colors may require more than one coat for complete hide. Actual paint colors may vary from on-screen and printer representation. Surface Preparation: All loose paint should be removed. The surface needs to be cleaned with detergent to remove dirt and grease and other contaminants. Rinse well to remove all soap residue and let dry. Scuff sand glossy surfaces and repair all imperfections. Remove dust with a damp cloth and allow to dry. New plaster must be properly cured. Patch cracks and holes, sand smooth when dry, then prime with this product. New woods may require and oil base primer/sealer. On metal use proper Rust Primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply this product as is with a high quality applicator such as a 3/8 inches nap roller cover, brush or pad painter. Thin sparingly with water if necessary for spraying. Dry Time: Dries in one hour. Recoat, if necessary, after four hours. Can clean gently with non-abrasive cleaner after 14 days. Cleanup: Use warm water and soap. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a room's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity such as bathrooms and kitchens. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall or ceiling. read more

KILZ
$24.87

KILZ Select Look Interior/Exterior Paint and Primer in One Semi-Gloss Paint creates a lustrous finish perfect for all interior sur...faces as well as exterior doors, trim and shutters. This radiant sheen is excellent for the high-traffic areas of your home and highly resistant to moisture, making it ideal for kitchens and bathrooms too. KILZ Select Look Semi-Gloss Paint delivers a durable and scrubbable finish that will resist staining, fading, peeling and mildew for years to come. Each gallon cove read more

Forest Valley Flooring
$11.32

Forest Valley Flooring 4-1/4 Solid Red Oak Hardwood Flooring in Semi Gloss Pacific Features: -Species: Red oak.-Installation type:... Stapled or nailed down.-Gloss level: 30%.-Janka hardness test: 1290.-Taber test S-42: 525 Cycles.-Construction:... read more

GRAB N GO
$23.97

High Endurance Red Delicious Semi Gloss Interior Paint, 1-Gallon: Interior paint, Semi-GlossSelf-priming: use to paint and primeGr...eat coverageDurable and washableLow odorAcrylic latexGuaranteed results read more

Bona
$15.34

BNA1012: Features: -Gallon Cleaner only.-For spot cleaning of food spills and other stains.-For periodic maintenance.-Leaves no oi...ly residue.-Fresh and clean scent.-pH neutral.-Nonflammable.-Non-toxic.-#1 Choice of professionals.-GREENGUARD certified for Children and Schools program. read more

ColorPlace
$17.94

Colorplace Red Delicious Semi Gloss Interior Paint, 1-Gallon: Interior paint, Semi-GlossDurableEasy applicationEasy clean upAcryli...c latex15-year warranty read more

Prestige Paints
$38.95

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl, aluminum and factory primed siding. (Note: When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp. ) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementations siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3. 78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a room's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity such as bathrooms and kitchens. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall or ceiling. read more

This item has been added to your list

This item has been added to your sale alerts