Refine By
Starrett

Grey-Flex carbon steel all-purpose blades are good for cutting a broad range of materials including mild steel, copper, brass, alu...minum and similar materials. These blades feature a hardened cutting edge with a tough, flexible back. read more

Starrett
$33.63
at Zoro

Automatic Center Punch, Length 5 In, Body Dia 5/8 In, Number of Pieces 1, Aluminum Handle, High Carbon Steel Point, Knurled, Adjus...table, Replaceable Point, Point 0.015 In, Blow Force 1.5 - 5.5 Lb, Single Hand Operation for Hinge Locating read more

Starrett
$64.48
at Zoro

Outside Spring Caliper, Range (In.) 8, Steel Construction, Nut Type Solid

Starrett
$30.82
at Zoro

Universal Snug, Features 1/4, 5/16, 3/8 In. Spindle Hole Dia., 3/32 to 1/4 In. Dia. Gripping Holes

Starrett
$2.69 $2.99
at Sears

Grey-Flex carbon steel all-purpose blades are good for cutting a broad range of materials including mild steel, copper, brass, alu...minum and similar materials. These blades feature a hardened cutting edge with a tough, flexible back. read more

Starrett
$2,885.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...int seats the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

Starrett
$668.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...ints seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

Starrett
$1,041.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...ints seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

Starrett
$1,311.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...ints seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

Starrett
$286.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$300.00
at Amazon

<div class="aplus"><p> The Starrett 434M-300 Combination Set has a square head, center head, reversible protractor head, and 300 m...m blade that has graduations in 1 mm and 1/2 mm on both sides, with numbered graduations every 10 mm. The protractor head is cast iron with a satin chrome finish on the reading surface and black enamel finish elsewhere. It has revolving turrets with direct-reading double graduations of 0 to 180 in opposite directions, for accurate reading of angles above or below the blade. It is reversible, with shoulders on both the front and back for reading on both sides.</p><p>The blade is made of hardened steel with a satin chrome finish, and the square and center heads are forged, hardened steel with a smooth black enamel finish. The square head has a scriber, a 90 square face, and a 45 miter face. It can be used for scribing right angles and parallel lines, or as a tri-square, miter, depth gauge, height gauge, or level. The center head accurately locates the center of cylindrical or square work. All heads have reversible bolt locks, and the square head and protractor head each have a spirit level. The combination set comes in a protective case.</p><p> Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. </p> <p> The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. </p></div> read more

Starrett
$236.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$305.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$327.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$309.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$319.00
at Amazon

<div class="aplus"><p>The Starrett 434-18-16R Combination Set has a square head, center head, reversible protractor head, and 18" ...blade with 16R graduations (1/32" 1/64", 1/50", and 1/100"). The protractor head is cast iron with a black enamel finish and has revolving turrets with direct-reading double graduations of 0 to 180 in opposite directions, for accurate reading of angles above or below the blade. It is reversible, with shoulders on both the front and back for reading on both sides.</p><p>The blade is made of hardened steel, and the square and center heads are forged, hardened steel with a smooth black enamel finish. The center head accurately locates the center of cylindrical or square work. The square head has a scriber, a 90 square face, and a 45 miter face. It can be used for scribing right angles and parallel lines, or as a tri-square, miter, depth gauge, height gauge, or level. All heads have reversible bolt locks, and the square head and protractor head each have a spirit level. The combination set comes in a protective case. </p><p> Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. </p> <p> The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. </p></div> read more

Starrett
$290.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$398.00
at Amazon

Sets contain three of the most commonly used precision tools. Set includes T436.1XRL-1 (1") outside micrometer with carbide face, ...120A-6 (6") dial caliper, C604R-6 (6") spring tempered precision rule. read more

Starrett
$473.00
at Amazon

Tool is ideal for laying out or cutting valleys or hips of different pitches, done as follows: Rotate the blade to the desired pit...ch, place the face of the stock against the work and draw a line. Then place the square end of the stock against the line and draw the complementary line. This gives the complementary angle automatically, without calculation. read more

Starrett
$230.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$185.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$184.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$184.00
at Amazon

A spirit level indicates when the base reference surface is level a feature not usually available on comparable protractors. Since... the protractor heads and blades are furnished with combination square sets, individual protractor heads or blades can be ordered separately. read more

Starrett
$177.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$176.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$166.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$166.00
at Amazon

Reversible, meaning there is a shoulder on both sides of the blade, allowing the tool to be reversed so the same angle can be scri...bed or measured left and right. read more

Starrett
$166.00
at Amazon

681-52514 Features: -Bevel protractors.-Tempered steel blades with accurate, machine-divided graduations.-Direct reading 0-180 in... opposite directions, permitting the direct reading of angles and supplementary angles.-Reversible lock bolt allows choice of which graduated side of the blade faces the operator.-Reversible, meaning there is a shoulder on both sides of the blade.-Can be reversed so the same angle can be scribed or measured left and right.-Spirit level indicates when the base reference surface is level - a feature not usually available on comparable protractors.-Range: 0-180.-Graduation Type: 4R.-Blade Graduations: 8ths, 16ths, Quick Reading, 32nds, 64ths.-Protractor Type: Reversible. Options: -Starrett satin chrome blades and protractor heads for easier reading are available (on 12'' sizes). Color/Finish: -Protractor heads are made of stable cast iron and finished with a choice of attractive black wrinkle finish or smooth black finish. Dimensions: -Blade Length: 12''. read more

Starrett
$161.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$153.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$153.00
at Amazon

The CP505E-12 Electronic Protractor provides direct readings for setting a saw for miter and straight cuts, a full protractor func...tion with a choice of output and a full 360-Degree swing, horizontal and vertical levels and a step by step guide including all calculations for crown molding work. The CP505E-12 has a knob to lock in measurements. It also includes horizontal and vertical level vials. Built on the design principles as other 505s, this high quality tool is compact and lightweight with smooth and precise movement of the arms. read more

Starrett
$152.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$150.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$149.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$148.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$146.00
at Amazon

Starrett No. 91 Tap Wrench is strong and well proportioned. They are nicely finished and the gripping surfaces are properly temper...ed. They will firmly hold square or round shanks. They are plunger operated by knurled sleeve the spring inside the sleeve causes plunger to back off when pressure is removed. Round shanks can be gripped, but care must be used. Excessive pressure may break the moveable V-jaw. read more

Starrett
$143.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$138.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$138.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$138.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$133.00
at Amazon

A spirit level indicates when the base reference surface is level a feature not usually available on comparable protractors. Since... the protractor heads and blades are furnished with combination square sets, individual protractor heads or blades can be ordered separately. read more

Starrett
$130.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$128.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$124.00
at Amazon

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the c...enter of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$113.75
at Amazon

Tough aluminum I beam level with select mahogany. Rubber cushion provide extra protection.

Starrett
$113.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$113.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$112.00
at Amazon

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjus...table square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and will last. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping