Shop Fox Shop Fox W1825 19-Inch Heavy-Duty Band Saw

Shop Fox W1825 19-Inch Heavy Duty Bandsaw

 ...I/21A6w3X0gKL.jpg" >
Shop Fox 19-Inch Bandsaw
View larger
Deluxe Resaw Fence
View larger
Cast Iron Wheels and Foot Brake
View larger

Power, capacity and an abundance of features make this 19-inch Heavy-Duty Bandsaw the saw of choice for many serious woodworkers. Once again, we've pulled out all the stops when it comes to including the most sought-after features. We've included an extra-wide table, deluxe 6-inch tall resaw fence that converts to a super low-profile fence, rack-and-pinion table tilt mechanism, cast iron table trunnions, cast iron wheels and foot brake. All-in-all, you would be hard-pressed to find a bandsaw with more useful features and proven performance than this outstanding machine.

Hi-Lo Convertible Deluxe Resaw Fence

The W1825 features a removable bi-positional extruded resaw fence that allows the operator to lower the blade guides close to the work piece when positioned with the fence face flat to the table for cutting smaller or thinner work such as veneer. Then it can easily be switched over to the vertical position to provide the support of taller slabs that are being resawn.

Cast Iron Wheels and Foot Brake

The cast iron wheels ensure smooth, quiet and vibration free operation and provide a tremendous amount of inertia to easily hog through thick, dense material. The foot brake not only acts as a safety feature, it also speeds production. Once the foot brake is engaged, power to the motor is cut and allows the bandsaw blade to be quickly brought to a stop.

Feature Packed

The W1825 is packed with features that make this bandsaw a pleasure to use. Features such as an extra wide 26-3/4-by-19-inch precision ground cast iron table, key lockout safety switch, 6-inch deluxe resaw fence, included miter gauge, two 4-inch dust ports, cast iron trunnion, rack-and-pinion table tilt mechanism and foot brake.

Specifications and Features
  • Motor: 3 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz
  • RPM: 1725
  • Precision ground cast iron table
  • Table size: 26-3/4 x 19 x 1-1/2-inch thick
  • Floor to table height: 37-1/2-inch
  • Cutting capacity/throat: 18-1/4-inch
  • Maximum cutting height: 12-inches
  • Blade length: 143-inch
  • Blade width: 1/8 to 1-1/4-inch
  • 2 blade speeds: 1700, 3500 FPM
  • Wheels: Fully-balanced cast iron with polyurethane tires
  • Wheel covers: pre-formed hinged steel
  • Blade guides: dual ball bearing with full enclosure protection
  • Bearings: sealed and permanently lubricated
  • Overall size: 36 W x 76 H x 32-inch D
  • Features blade tension indicator
  • Rack-and-pinion table tilt mechanism
  • Height scale measurement
  • Fence with scale and magnifying window
  • Deluxe cast iron fence with extruded aluminum resaw fence.
  • Heavy-duty cast iron miter gauge
  • Two 4-inch dust ports
  • Table tilt: 5-degrees left, 45-degrees right
  • Quick change blade release/tensioning
  • Rack -and-pinion upper guide adjustment
  • Foot brake
  • Cast iron trunnion
  • Include 3/4-inch hook style blade
  • Approximate shipping weight: 480 lbs.
read more

Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Klein Tools
$29.98
at Amazon

The Klein 32558 Heavy Duty Ratcheting Screwdriver/Nut Driver with Cushion Grip includes an interchangeable shaft that holds six (6...) universal tips. Converts to three (3) nut driver sizes and one (1) hex driver. The Ratcheting Screwdriver/Nut Driver has a shank length of 2.95-Inches and an overall length of 8-Inches. The 32558 has a 3-way ratcheting mechanism for forward, reverse and locked positions. Nut drivers are heat-treated for added strength and improved torque. Cushion-Grip handles provide superior torque and comfort. The Ratcheting Screwdriver/Nut Driver contains a 3/16-Inch and 1/4-Inch slotted heads, 1 and 2 Phillips head, 1/4-Inch, 5/16-Inch and 3/8-Inch nut drivers, 1 and 2 square-recess, and 3/8-Inch hex driver. Since 1857, Klein Tools has manufactured the world's finest hand tools. Today, Klein Tools is the 1 choice among professional tradesmen.  We manufacture more than 3,000 tools and accessories, including pliers, cable and bolt cutters, wire strippers, voice-data-video tools and testers, fish tapes, conduit benders, drill bits, insulated tools, gloves and many other high-quality products. Klein Tools' dedication to quality and innovation continues with products available for professional tradesmen worldwide. read more

Ames True Temper
$33.58
at Amazon

Ames 1190600 4 Lb 36" Single Bit Dayton Axe With Hickory HandleAmes 1190600 4 Lb 36" Single Bit Dayton Axe With Hickory Handle Fea...tures: Used to trim branches, prune trees, split and cut wood Can also be used to drive wood stakes with the face Repair handle 2017300 (1340-3704) 4 lb head 36" hickory handle read more

Diablo
$54.15
at Amazon

The Diablo General-Purpose Saw Blade has a super-thin laser-cut kerf for effortless cutting performance. Tico titanium cobalt hi-d...ensity carbide provides a controlled carbide wear that stays sharper longer. Perma-Shield non-stick coating shields the blade against heat, gumming and corrosion. Blade Diameter in. 10, Teeth qty. 40, Blades qty. 1, Arbor Size in. 5/8, Arbor Knockout Diamond, Blade Speed RPM 7,000, Blade Use General purpose, Tip Type Carbide. 10in. x 40T For cutting wood and wood composites Laser-cut stabilizer vents trap noise and vibration and stabilizes the blade Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact Laser-cut heat expansion slots allow blade to expand due to heat build up, keeping the cut true and straight 5/8in. arbor w/diamond knockout 7000 max. RPM read more

Makita
$1,678.00
at Amazon

Makita's 14-Inch 73cc Industrial Power Cutter has a five stage filtration system with advanced directional air flow which provides... very clean air for better saw performance. It has cushioned operator grips with 4 vibration-absorbtion rubber buffers for increased operator comfort. The water kit assembled to saw can be used with garden hose, gravity feed tank or pressure tank. A micro chip-controlled carburetor is designed to compensate engine timing according to work load. read more

Weaver
$77.49
at Amazon

Get just the right amount of torque on your rings and bases with Weaver's new Gunsmith Torque Wrench. Every mounting system operat...es best at predetermined manufacturer's specs and with the Weaver Gunsmith Torque Wrench you can dial in that constant screw pressure quickly and easily. Don't damage your scope by over tightening rings and bases. Use the Weaver Gunsmith Torque Wrench and protect your optic investment. Skilled shooters can now become skilled gunsmiths. Tackle any Gunsmithing task with Weaver's quality tools and comprehensive kits. Designed to elevate your workbench into a professional-grade gunsmithing station, these quality tools and accessories enable you to service your firearm with precision. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping