Shop Fox Shop Fox W1811 10-Inch 5 HP Sliding Table Saw
Shop Fox W1811 10-Inch Sliding Table Saw
Made for cutting wide panels in limited shop space, this 10-inch Sliding Table Saw features a scoring blade to eliminate cross grain tear-out, telescoping crosscut fence with two rock-solid flip stops, fully adjustable miter fence with flip stop, two-position extruded aluminum rip fence, riving knife and large blade guard with integral dust port. This 10-inch table saw has a 63-inch long crosscut capacity and makes quick work of cutting down all standard plywood panels to size. Accepts 10-inch saw blades with 5/8-inch arbor bores or dado blades up to 13/16-inch wide.
The splitter/riving knife is a metal plate that prevents the freshly cut pieces of the workpiece from pinching the backside of the blade and causing a kickback. The adjustable scoring blade included with the sliding table saw has wedge shaped teeth. The kerf thickness is adjusted by changing the height of the scoring blade. The scoring blade offers a shallow cut ahead of the 10-inch blade to prevent splitting and prevent tearout.
Crosscut Fence with Flip Stops
The crosscut fence is used during crosscutting operations. It features a scale and multiple flip stops for precise, repeatable crosscutting operations. It can also be set-up for miter cuts. The crosscut table provides a wide stable platform for supporting full-size panels during crosscutting operations and features an angle scale for cutting miters with the crosscut fence.
Sliding or Tradition Table Saw
The W1811 sliding table saw is primarily used to rip and crosscut sheet stock or panels in a production setting. The sliding table makes it much easier and safer to feed these large workpieces through a cut. This saw can also be used as a traditional table saw for most types of through-cuts. The scoring blade may or may not be used, depending on if the workpiece is faced with laminate, melamine, or other solid surface material, or if tear-out free cuts are required. If the scoring blade is not needed for cutting operations, it can be lowered under the table so it will stay sharp for later operations. When using the sliding table saw as a traditional table saw, the sliding table is locked in place and the rip fence is then used to guide the workpiece through the cut.
Features and Specifications
- Motor: 5 HP, 230V, single-phase, TEFC, 3450 RPM, 19A
- Blade tilt: 0 to 45-degrees
- Table size extension wings: 27- inch L x 14-3/8-inch W
- Sliding table size: 63-inch L x 12-1/4-inch W
- Main blade arbor speed: 4000 RPM
- Main blade diameter: 10-inch
- Main blade arbor diameter: 5/8-inch
- Scoring blade diameter: 3-1/8-inch
- Scoring blade arbor diameter: 22mm
- Scoring blade arbor speed: 8000 RPM
- Maximum dado width: 13/16-inch
- Maximum depth of cut at 90-degrees: 3-1/8-inch
- Maximum depth of cut at 45-degrees: 2-1/4-inch
- Maximum ripping width with standard rip fence: 33-inch
- Maximum cross cutting width with crosscut fence: 78-1/2-inch
- Maximum cross cutting length with crosscut fence: 63-inch
- Overall dimensions: 76L x 124-3/4W x 46-inch H
- Dust port size: 2-1/2-inch with blade guard, 4-inch main
- Shielded and lubricated bearings
- Switch: magnetic with thermal overload protection
- Approximate shipping weight: 687 lbs.
Ink Cartridges - 10 Pack - Compatible with Canon PGI-5BK / CLI-8 -- Print Color: Black, Cyan, Magenta, Yellow -- Printer Compatibi...lity: CANON PIXMAIP4200,CANON PIXMAIP5200,CANON PIXMAIP5200R,CANON PIXMAMP500,CANON PIXMAMP800,CANON PIXMAMP800R,CANON... read more
Replacement for Hewlett Packard (HP 88XL) Bulk Set of 5 High Yield Ink Cartridges
Replacement for Hewlett Packard HP 950XL 951XL Combo-Pack of 10 (4 Black CN045AN, 2 Cyan CN046AN, 2 Magenta CN047AN & 2 Yellow CN0...48AN) High Yield Ink Cartridge read more
Replacement for Hewlett Packard HP 932XL 933XL Combo-Pack of 10 (4 CN053AN Black, 2 CN054AN Cyan, 2 CN055AN Magenta, 2 CN056AN Yel...low) High Yield Ink Cartridge read more
Replacement Black CF283X (HP 83X) High Yield Laser Toner Cartridge for Hewlett Packard Printers (Bulk Set of 10-Pack)