Shop Fox SHOP FOX W1712 1.5-Horsepower 6/12-Inch Combination Disc and Belt Sander
Shop Fox W1712 6-by-12-Inch Heavy Duty Combination Sander
This Heavy-Duty Combination Sander uses a 6-by-48-inch belt, a 12-inch disc, and a 1-1/2 HP motor to tackle your tougher sanding operations. Unlike many belt-driven sanders that require adjustments, the SHOP FOX W1712 uses a direct ball bearing supported drive shaft from the motor to the sanding disc and belt to deliver a maintenance and vibration free positive torque flow. For increased sanding versatility and control, both cast iron tables accept the miter gauge.
Ground Cast Iron Tables
The W1712 features two ground cast iron tables. Both the belt sander and disc sander tables tilt 0-degrees left and 45-degrees right for precise sanding operations. The sanding belt can be placed vertically or horizontally for various sanding applications. Miter sanding can be done easily with the included deluxe miter gauge. The miter gauge features a scale for accurate positioning of your workpiece and can be used on the both the disc and belt sanding table.
6-by-48-Inch Sanding Belt
The W1712 sanding belt is large enough to handle the most demanding sanding operation. The built in dust port on the belt sander reduces dust build up in your shop and aids in dust management. The 12-3/8 by 7-inch cast iron table offers ample work support and tilts up to 45-degrees.
Built to Last
The W1712 12-inch Disc and 6-inch Belt Sander is specially designed to provide many years of trouble-free service. Close attention to engineering detail, ruggedly built parts, and a rigid quality control program assure safe and reliable operation.
Specifications and Features
- Motor: 1-1/2 HP, 110V, 12A, Single-phase, 1,725 RPM
- Tables: Precision ground cast iron (2)
- Sanding belt size: 6-by-48-inch
- Disc size: 12-inch (Disc is computer balanced)
- Belt release: Quick change
- Sanding belt speed: 878 FPM
- Disc speed: 1,725 RPM
- Switch: ON/OFF toggle with safety key
- Stand: Cabinet style, powder coated paint
- Heavy-duty miter gauge
- Powder coated paint
- Dust ports: 2-inch and 2-1/2-inch
- Bearings: Shielded ball bearing construction
- Approximate shipping weight: 178 lbs.
Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more
What's in the Box:<br> One 12-Volt LithiumTech Impact Driver (RK2512), one 12-Volt LithiumTech Drill/Driver (RK2510), two batterie...s, one 30-minute charger, one 2-inch driver bit, and carrying bag.<p> Impact driver has 1/4-inch quick-change hex drive.<br> No memory effect so batteries can charge any time.<br> Drill-driver has 15+1 torque settings including drill mode.<br> Drill-driver's 3/8-inch keyless chuck features soft grip for easy one-hand use. Product Info:<p> Cordless drill driver<br> Dual gear range<br> Soft grip comfort handle<br> Horizontal and vertical bubble levels<br> Battery power tester<br> Accessory includes 2 double ended bits, 2 NiCd batteries, one 1 hour charger, 1 auxillary handle, and carrying case<br> 1 hour charging time<br> 24 clutch settings<br> 1/2" keyless chuck<br> 1/2" drill capacity for steel<br> 1-1/4" drill capacity for wood<br> 0 to 400 gear 1 no load speed<br> 0 to 1300 gear 2 no load speed<br> 275 inches per lb max torque<br> 120 vac<br> 60 Hz<br> 18 volts<br> 5.4 lbs read more
Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more
The Porter-Cable PCFP12234 3-Tool Combo Kit contains: a 6-gal 150 psi compressor (drives more nails than traditional 135 max psi c...ompressor) that weighs only 30lbs, 2.6SCFM at 90 psi, maintenance-free pump, and 120V electric unit which allows user to run on standard household current / FN250C 16 gauge 2-1/2-Inch Finish Nailer uses standard 16 ga. finish nails from 1-Inch to 2-1/2-Inch long / BN200C 18 gauge 2-Inch Brad nailer which uses standard 18 ga. brad nails from 5/8-Inch to 2-Inch long / TS056: Heavy Duty 3/8" Crown stapler drives Heavy Duty 3/8-inch Crown Staples from1 /4-inch to 9/16-inch for multiple applications. All nailers and staplers have long life maintenance-free motors, tool-free depth-of-drive adjustment with detents for proper setting of nail heads, and tool-free jam release mechanism for easy nail removal. Combo Kit also includes 25ft of 1/4-Inch air hose with a coupler and plug, belt hook accessory, and fasteners. 1-year limited warranty on compressor components. read more
Product Features: The easy to read gauges allow you to monitor tank and hose pressure at a glance Ideal for inflation, brad nailin...g, stapling, air brushing and more The small size allows for easy storage and transportation On-board storage offers convenient access to your 2-in-1 nailer / staplerIncludes: 25' recoil hose 1-1/4" 2-in-1 nailer / stapler kit Female coupler Two male plugs Air chuck Inflation needle Inflation adapter Two inflation nozzles read more
The Porter-Cable PCFP12656 Finish and Brad Combo Kit contains: a 6-gal 150 psi compressor (drives more nails than traditional 135... max psi compressor) that weighs only 30lbs, 2.6SCFM at 90 psi, maintenance-free pump, and 120V electric unit which allows user to run on standard household current / FN250C 16 gauge 2-1/2-Inch Finish Nailer uses standard 16 ga. finish nails from 1-Inch to 2-1/2-Inch long / BN200C 18 gauge 2-Inch Brad nailer which uses standard 18 ga. brad nails from 5/8-Inch to 2-Inch long. All nailers and staplers have long life maintenance-free motors, tool-free depth-of-drive adjustment with detents for proper setting of nail heads, and tool-free jam release mechanism for easy nail removal. Combo Kit also includes 25ft of 1/4-Inch air hose with a coupler and plug, 100 finish nails of 2-Inch length, and 100 brad nails of 1-1/4-Inch length. 1-year limited warranty on compressor components. read more
This Porter combo kit includes a nailgun and a powerful compressor, everything you need to do the job. Great for molding & trim, ...furniture or other wood working projects. read more
This lightweight Bosch 7 1/4in. circular saw delivers 15 Amps of power and a left blade design for the clearest line of sight whil...e cutting. Anti-snag lower guard lets you make cuts without having to advance the guard, even while making bevel cuts. Blade Diameter in. 7 1/4, Bevel Capacity deg 56, Blade Included Yes, Amps 15, Speed - No Load RPM 6200, Cordless No, Blade Location Left side. Lightweight design minimizes user fatigue Left blade design for best line of sight Anti-snag lower guard lets user make cuts without having to advance guard Includes 24T carbide blade read more
Makita XRJ01 18V LXT Lithium-Ion Cordless Compact Recipro Saw Kit. The Makita XRJ01 and XRJ01Z has a Variable speed (0 - 3,000 str...okes per minute) combined with a 1/2" stroke length for faster and more efficient cutting. Makita exclusive dual-position on/off switch allows for either paddle or trigger switch operation. The "Tool-less" blade change system allows for faster blade installation and removal for increased productivity. It has a Compact design at 15-5/8" long; weighs only 3.9 lbs. (with battery) for convenient operation. It's Built-in L.E.D. light illuminates the work area. Rubberized soft grip provides increased comfort on the job. It is Ideal for a wide range of cutting applications.The LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles. LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The 30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery to produce more lifetime work. The charger earned the ENERGY STAR label for meeting the strict energy-efficient guidelines set by the US. Environmental Protection Agency (EPA) and US Department of Energy (DOE). It has a 3-year warranty on tool 1-year on battery and charger. read more