Schlage Schlage Electronics AD-400 Series Networked Wireless Electronic Lockset, Multi-Technology Reader, Cylindrical Lock, Schlage Cylinder Keyway, Rhodes Lever, Satin Chrome Finish, For Classroom or Storeroom Use

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Rhodes-style lever handle is battery powered, provides a secure door latching system for storeroom an...d classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.

The angular Rhodes-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.

Specifications
Specifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.
Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)
Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)
Modulation900 MHz spread spectrum, direct sequence, 10 channels
Communication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sight
System interfaceRS-485, Wiegand, or Clock & Data via PIM400 to host
Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*
Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*
Compatible door thickness1-3/4"
Backset2-3/4"
Power supply4 AA batteries

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.

For more information, see the manufacturer's literature.


Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.

Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.

What's in the Box?

  • Schlage electronic lockset assembly
  • 2 keys
  • 4 AA batteries
  • Lever removal tool
  • Mounting hardware
  • Instructions
read more

related
Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Rhodes-style ...lever handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The angular Rhodes-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Sparta-style ...lever handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,034.51
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic mortise lockset with satin chrome finish and Sparta-style leve...r handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lock.The Sparta-style lever handle is long, smooth, and curved, is made of steel, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,737.00
at Amazon

<div class="aplus"><p>The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome fi...nish and Sparta-style lever handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.</p><p>The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Specifications met</td><td>Lockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.</td></tr><tr><td>Reader frequencies</td><td>125 kHz (proximity) and 13.56 MHz (smart)</td></tr><tr><td>Maximum read ranges</td><td>Up to 1.25" (proximity) and up to 0.75" (smart)</td></tr><tr><td>Modulation</td><td>900 MHz spread spectrum, direct sequence, 10 channels</td></tr><tr><td>Communication range</td><td>Up to 200 feet with obstructions; up to 1,000 feet clear line of sight</td></tr><tr><td>System interface</td><td>RS-485, Wiegand, or Clock & Data via PIM400 to host</td></tr><tr><td>Front housing dimensions</td><td>9.46 x 3.44 x 3.67 inches (H x W x D)*</td></tr><tr><td>Back housing dimensions</td><td>14.38 x 3.44 x 3.67 inches (H x W x D)*</td></tr><tr><td>Compatible door thickness</td><td>1-3/4"</td></tr><tr><td>Backset</td><td>2-3/4"</td></tr><tr><td>Power supply</td><td>4 AA batteries</td></tr></tbody></table><p>*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.</p><p>For more information, see the manufacturer's literature.</p><br/><p>Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.</p><p>Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.</p><h4>What's in the Box?</h4><ul><li>Schlage electronic lockset assembly</li><li>2 keys</li><li>4 AA batteries</li><li>Lever removal tool</li><li>Mounting hardware</li><li>Instructions</li></ul></div> read more

Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Rhodes-style ...lever handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a combination multi-technology reader and keypad to verify access credentials, and accepts a Schlage FSIC core. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed to accept a Schlage full size interchangeable core (FSIC) to enable mechanical override of the electronic system. The combination multi-technology reader and keypad scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader or accepts codes entered into the 12-button keypad to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The angular Rhodes-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Sparta-style ...lever handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and accepts a Best SFIC core. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed to accept a Best small format interchangeable core (SFIC) to enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome finish and Sparta-style ...lever handle is battery powered, provides a secure door latching system for office use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. Access can be granted electronically from someone inside, and the lock also can be disabled to allow foot traffic to flow freely. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-300 series networked hardwired electronic cylindrical lockset with satin chrome finish and Sparta-style... lever handle provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards and fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIB300-2D panel interface board (sold separately) is required in order to connect up to two AD-300 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, and RoHSspecifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000 Grade 1 specifications. Multi-technology reader meets FCC, Industry Canada (IC), UL 294 Listed, ISO standard 15693, and ISO standard 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)System interfaceWiegand or Clock & Data via PIB300-2D or RS-485 directlyCable requirements for power18 AWG, 2 conductor (Belden 8760 or equivalent)Cable requirements for data24 AWG, 2 or 4 conductor shielded (Belden 9841, 9842 or equivalent)Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions12.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply12 or 24 VDC*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keysLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome and Rhodes-style lever h...andle finish is battery powered, provides a secure door latching system for storeroom and classroom use, includes a magnetic stripe reader to verify access credentials, and accepts a Best SFIC core. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed to accept a Best small format interchangeable core (SFIC) to enable mechanical override of the electronic system. The magnetic stripe reader scans cards (sold separately) as they are inserted to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical locks installs more easily than a mortise lockset.The angular Rhodes-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1.Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-300 series networked hardwired electronic cylindrical lockset with aged-bronze finish and Sparta-style ...lever handle provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards and fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIB300-2D panel interface board (sold separately) is required in order to connect up to two AD-300 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000 Grade 1 specifications. Multi-technology reader meets FCC, Industry Canada (IC), UL 294 Listed, ISO standard 15693, and ISO standard 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)System interfaceWiegand or Clock & Data via PIB300-2D or RS-485 directlyCable requirements for power18 AWG, 2 conductor (Belden 8760 or equivalent)Cable requirements for data24 AWG, 2 or 4 conductor shielded (Belden 9841, 9842 or equivalent)Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions12.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply12 or 24 VDC*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keysLever removal toolMounting hardwareInstructions read more

Schlage
$1,089.33
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic mortise lockset with satin chrome finish and tubular lever han...dle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and accepts a Schlage FSIC core. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed to accept a Schlage full size interchangeable core (FSIC) to enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lock.The tubular lever handle is made of steel and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply8 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly8 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,006.35
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic mortise lockset with satin chrome finish and Sparta-style leve...r handle is battery powered, provides a secure door latching system for storeroom and classroom use, and includes a multi-technology reader to verify access credentials. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed without a manual override core. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lock.The Sparta-style lever handle is long, smooth, and curved, is made of steel, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,024.31
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic mortise lockset with satin chrome finish and Sparta-style leve...r handle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and accepts a Best SFIC core. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever handle is designed to accept a Best small format interchangeable core (SFIC) to enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lock.The Sparta-style lever handle is long, smooth, and curved, is made of steel, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostFront housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions14.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-300 series networked hardwired electronic mortise lockset with satin chrome finish and Rhodes-style lev...er handle provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and accepts a Schlage FSIC core. The lockset assembly communicates with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The lever is designed to accept a Schlage full size interchangeable core (FSIC) to enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards and fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lockset.The angular Rhodes-style lever handle is made of steel and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIB300-2D panel interface board (sold separately) is required in order to connect up to two AD-300 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000 Grade 1 specifications. Multi-technology reader meets FCC, Industry Canada (IC), UL 294 Listed, ISO standard 15693, and ISO standard 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)System interfaceWiegand or Clock & Data via PIB300-2D or RS-485 directlyCable requirements for power18 AWG, 2 conductor (Belden 8760 or equivalent)Cable requirements for data24 AWG, 2 or 4 conductor shielded (Belden 9841, 9842 or equivalent)Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions12.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply12 or 24 VDC*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assemblyLever removal toolMounting hardwareInstructions read more

Schlage
$1,117.56
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic exit trim assembly with satin chrome finish is battery powered... and includes a Rhodes-style lever handle with Schlage cylinder keyway and a multi-technology reader that work with a rim style, concealed vertical cable, or concealed vertical rod exit device (sold separately) to create a credential-verifying door latching system for storeroom and classroom use. When used in conjunction with a compatible exit device, the assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The exit device and interior lockset are not included.The angular Rhodes-style lever handle is made of steel and can be installed as right or left handed. The two included keys and the Schlage 6-pin full cylinder in the base of the lever handle enable mechanical override of the electronic system. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The assembly is compatible with most access control systems for integration into an existing security network. A low current request-to-exit switch (sold separately) is required. The Schlage PID400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsCompatible exit devicesVon Duprin 98/99 and 98/99XP rim, SVR, CVR (metal doors only), CVC (metal doors only), and mortiseVon Duprin 22/22F rim and SVRFalcon 25 rimCompatible request-to-exit switchVon Duprin 050281Falcon 650359Specifications metExit trim mechanical features meet or exceed ANSI A156.25 and A156.3 standards. Multi-tech reader meets ISO 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostHousing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*BacksetPer exit devicePower supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic exit trim assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-300 series networked hardwired electronic mortise lockset with satin chrome finish and Rhodes-style lev...er handle provides a secure door latching system for storeroom and classroom use, includes a multi-technology reader to verify access credentials, and accepts a Best SFIC core. The lockset assembly communicates with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards and fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The mortise lockset inserts into a large cutout in the edge of the door, enabling a more secure latch than a cylindrical lockset.The angular Rhodes-style lever handle is made of steel and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIB300-2D panel interface board (sold separately) is required in order to connect up to two AD-300 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.13 Series 1000 Grade 1 specifications. Multi-technology reader meets FCC, Industry Canada (IC), UL 294 Listed, ISO standard 15693, and ISO standard 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)System interfaceWiegand or Clock & Data via PIB300-2D or RS-485 directlyCable requirements for power18 AWG, 2 conductor (Belden 8760 or equivalent)Cable requirements for data24 AWG, 2 or 4 conductor shielded (Belden 9841, 9842 or equivalent)Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions12.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply12 or 24 VDC*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assemblyLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics AD-300 series networked hardwired electronic cylindrical lockset with satin chrome finish and Athens-style... lever handle provides a secure door latching system for storeroom and classroom use, includes a keypad to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. The 12-button keypad requires a code to unlock the door and has a blue LED backlight to provide visibility in low-light environments. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.The smooth, curved Athens-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIB300-2D panel interface board (sold separately) is required in order to connect up to two AD-300 lockset assemblies to the access control panel or reader interface board.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL10 C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000 Grade 1 specifications.System interfaceWiegand or Clock & Data via PIB300-2D or RS-485 directlyCable requirements for power18 AWG, 2 conductor (Belden 8760 or equivalent)Cable requirements for data24 AWG, 2 or 4 conductor shielded (Belden 9841, 9842 or equivalent)Front housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Back housing dimensions12.38 x 3.44 x 3.67 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply12 or 24 VDC*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly2 keysLever removal toolMounting hardwareInstructions read more

Schlage

The Schlage Electronics CO-200 series standalone electronic cylindrical lockset with satin chrome finish and Rhodes-style lever ha...ndle is battery powered, provides a secure door latching system for storeroom and classroom use, includes a proximity reader to verify access credentials of up to 2000 users, and includes a Schlage cylinder keyway. The lockset assembly functions without a control system and access credentials are stored on the lock. The proximity reader scans 125-kHz cards and fobs (sold separately) when placed near the reader to confirm security credentials and allow access. The Schlage handheld device (HDD) (sold separately) is required to program the credentials and lock status, as well as to set the times that specific cards are allowed access, set automatic lock and unlock schedules, and define access for up to 32 holidays and 16 time zones. The cylindrical lock installs more easily than a mortise lock.The angular Rhodes-style lever handle is made of pressure-cast zinc and can be installed as right or left handed. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the handle enable mechanical override of the electronic system. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied. LED lights can also be programmed to indicate when batteries are running low. The inside handle does not lock, allowing users to exit any time.SpecificationsSpecifications metLockset meets ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL 10 C, FCC Part 15, ADA, and RoHS specifications.Reader frequency125 kHzMaximum read rangeUp to 1.25"Compatible proximity technologySchlage, XceedID, HID, GE/CASI ProxLite, and AWIDExterior housing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*Interior assembly dimensions10.10 x 3.44 x 2.96 inches (H x W x D)*Compatible door thickness1-3/4"Backset2-3/4"Power supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever; D is depth, the horizontal distance from front to back including the lever.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic lockset assembly4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,117.56
at Amazon.com

The Schlage Electronics AD-400 series networked wireless electronic exit trim assembly with satin chrome finish is battery powered... and includes a Sparta-style lever handle with Schlage cylinder keyway and a multi-technology reader that work with a rim style, concealed vertical cable, or concealed vertical rod exit device (sold separately) to create a credential-verifying door latching system for storeroom and classroom use. When used in conjunction with a compatible exit device, the assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The exit device and interior lockset are not included.The Sparta-style lever handle is long, smooth, and curved, is made of steel, and can be installed as right or left handed. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the lever handle enable mechanical override of the electronic system. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The assembly is compatible with most access control systems for integration into an existing security network. A low current request-to-exit switch (sold separately) is required. The Schlage PID400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.SpecificationsCompatible exit devicesVon Duprin 98/99 and 98/99XP rim, SVR, CVR (metal doors only), CVC (metal doors only), and mortiseVon Duprin 22/22F rim and SVRFalcon 25 rimCompatible request-to-exit switchVon Duprin 050281Falcon 650359Specifications metExit trim mechanical features meet or exceed ANSI A156.25 and A156.3 standards. Multi-tech reader meets ISO 15693 and ISO 14443 specifications.Reader frequencies125 kHz (proximity) and 13.56 MHz (smart)Maximum read rangesUp to 1.25" (proximity) and up to 0.75" (smart)Modulation900 MHz spread spectrum, direct sequence, 10 channelsCommunication rangeUp to 200 feet with obstructions; up to 1,000 feet clear line of sightSystem interfaceRS-485, Wiegand, or Clock & Data via PIM400 to hostHousing dimensions9.46 x 3.44 x 3.67 inches (H x W x D)*BacksetPer exit devicePower supply4 AA batteries*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.For more information, see the manufacturer's literature.Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.What's in the Box?Schlage electronic exit trim assembly2 keys4 AA batteriesLever removal toolMounting hardwareInstructions read more

Schlage
$1,747.00
at Amazon

<div class="aplus"><p>The Schlage Electronics AD-400 series networked wireless electronic cylindrical lockset with satin chrome fi...nish and Sparta-style lever handle is battery powered, provides a secure door latching system for office use, includes a multi-technology reader to verify access credentials, and contains a Schlage cylinder keyway. The lockset assembly communicates wirelessly with the system in real time to implement modifications to credentials, trigger a central lockdown, or provide access to up-to-the minute audit data. The two included keys and the Schlage 6-pin full cylinder keyway in the base of the handle enable mechanical override of the electronic system. The multi-technology reader scans either proximity (125 kHz) or smart (13.56 MHz) cards or fobs (sold separately) when placed near the reader to confirm security credentials and allow access. Access can be granted electronically from someone inside, and the lock also can be disabled to allow foot traffic to flow freely. As security needs change, the reader module can be replaced with a different AD-series reader that better suits access control needs. The cylindrical lock installs more easily than a mortise lockset.</p><p>The Sparta-style lever handle is long, smooth, and curved, is made of pressure-cast zinc, and can be installed as right or left handed. Three colored LED lights and an audio signal can be programmed to indicate when credentials are validated or denied or when batteries are running low. The inside handle does not lock, allowing users to exit any time. The assembly is compatible with most access control systems for integration into an existing security network. The Schlage PIM400-TD2 panel interface board (sold separately) is required in order to connect up to two AD-400 lockset assemblies to the access control panel or reader interface board.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Specifications met</td><td>Lockset meets UL 294, UL 10C, FCC Part 15, ADA, and RoHS specifications. Lockset mechanical features meet or exceed ANSI A156.25 and A156.2 Series 4000, Grade 1. Multi-technology reader meets ISO standard 15693 and ISO 14443 specifications.</td></tr><tr><td>Reader frequencies</td><td>125 kHz (proximity) and 13.56 MHz (smart)</td></tr><tr><td>Maximum read ranges</td><td>Up to 1.25" (proximity) and up to 0.75" (smart)</td></tr><tr><td>Modulation</td><td>900 MHz spread spectrum, direct sequence, 10 channels</td></tr><tr><td>Communication range</td><td>Up to 200 feet with obstructions; up to 1,000 feet clear line of sight</td></tr><tr><td>System interface</td><td>RS-485, Wiegand, or Clock & Data via PIM400 to host</td></tr><tr><td>Front housing dimensions</td><td>9.46 x 3.44 x 3.67 inches (H x W x D)*</td></tr><tr><td>Back housing dimensions</td><td>14.38 x 3.44 x 3.67 inches (H x W x D)*</td></tr><tr><td>Compatible door thickness</td><td>1-3/4"</td></tr><tr><td>Backset</td><td>2-3/4"</td></tr><tr><td>Power supply</td><td>4 AA batteries</td></tr></tbody></table><p>*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right not including the lever handle; D is depth, the horizontal distance from front to back including the lever handle.</p><p>For more information, see the manufacturer's literature.</p><br/><p>Electronic door locking systems use electric current to control and secure access. Entry is regulated with a door access device such as a keypad or a reader that limits entry to authorized users. Some systems can designate user access for specific hours or days and may include a keyway for mechanical override. Common electronic locking mechanisms include electromagnetic locks and electric strikes. These systems are hardwired or battery powered, which is suitable when electrical wiring is not readily available. Locks are available in cylindrical and mortise styles. A cylindrical lock requires two bored perpendicular holes in the door for installation: one in the door face and a crossbore hole in the door edge. A mortise lock fits into a pocket recess in the door edge.</p><p>Schlage Electronics, an Allegion brand, manufactures security products for commercial and residential use. Allegion is headquartered in Carmel, IN.</p><h4>What's in the Box?</h4><ul><li>Schlage electronic lockset assembly</li><li>2 keys</li><li>4 AA batteries</li><li>Lever removal tool</li><li>Mounting hardware</li><li>Instructions</li></ul></div> read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping