Rothenberger Rothenberger 70015 MINI MAX Tube Cutter, 1/8" - 1-1/8" OD

The Rothenberger 70015 Mini Max Tube Cutter for Copper Tubes, 1/4 to 1-1/8-inch, features an ergonomic design of body and knob with seating surface for the hand during turning. Established in 1949, Rothenberger has over 50 years of history ...as the market leader of innovative and technologically sophisticated pipe tools and machines. A long list of patents, Certification in ISO 9000, 9001 and 9002, and an emphasis in research and development result in continuous improvement and new developments in professional pipe tool technology. read more

Rothenberger
$59.59 $75.99
at Sears

Heavy-duty cast-iron pipe [TT_Wrench] features flat coil spring design for immediate gripping and perfect ratchet action. Dual hea...t-treated jaws and machined-sharp teeth. read more

Rothenberger
$67.99
at Sears

Easier to use for longer periods, this pipe [TT_Wrench] has an aluminum handle nearly 40 percent lighter than comparable cast iron... models and operating strength is well above U.S. specifications. Rothenberger products carry a limited lifetime warranty against manufacturers defects in materials and workmanship. This does not include normal wear and tear. read more

Rothenberger
$40.39 $47.99
at Sears

Heavy-duty cast-iron pipe [TT_Wrench] features flat coil spring design for immediate gripping and perfect ratchet action. Dual hea...t-treated jaws and machined-sharp teeth. read more

Rothenberger
$25.23 $31.99
at Sears

Heavy-duty cast-iron pipe [TT_Wrench] features flat coil spring design for immediate gripping and perfect ratchet action. Dual hea...t-treated jaws and machined-sharp teeth. read more

Rothenberger
$97.99
at Sears

Heavy-duty aluminum handle pipe [TT_Wrench] is nearly 40 percent lighter than comparable cast-iron models so it is easier to use f...or longer periods. Dual heat-treated jaws and machined-sharp teeth. read more

Rothenberger
$163.70
at Amazon

Rothenberger 70163 Pipe Wrench, Aluminum, 36"Rothenberger 70163 Pipe Wrench, Aluminum, 36" Features: Extremely light aluminum allo...y with high strength: Approx. 40% lighter ALUMINUM Pipe Wrench for PVC Coated Conduit has specially designed jaws for gripping coated pipe : Protects plastic coating Max. O.D.: 5" read more

Rothenberger
$122.50
at Amazon

The Rothenberger 70040 Steel Pipe Cutter, 1-1/4-inch, has wide rollers to secure guiding of cutter wheel on tube. Easy pressure co...ntrol allows optimum force transmission onto tube. Hardened cutter wheel made of high alloy steel: Long service life. Burr-free external cutting: Immediate thread cutting possible. Optional cutter wheel for cast iron pipes. Established in 1949, Rothenberger has over 50 years of history as the market leader of innovative and technologically sophisticated pipe tools and machines. A long list of patents, Certification in ISO 9000, 9001 and 9002 and an emphasis in research and development result in continuous improvement and new developments in professional pipe tool technology. read more

Rothenberger
$114.50
at Amazon

The Rothenberger 55089X Direct Cut Shear, 1-1/2-inch has a stainless steel blade for fast and accurate cuts on PE, PEX, PP and CPV...C plastic pipe. This listing is for a package containing ten direct cut shears. Established in 1949, Rothenberger has over 50 years of history as the market leader of innovative and technologically sophisticated pipe tools and machines. A long list of patents, Certification in ISO 9000, 9001 and 9002 and an emphasis in research and development result in continuous improvement and new developments in professional pipe tool technology. read more

Rothenberger
$93.08
at Amazon

Rothenberger 70162 Pipe Wrench, Aluminum, 24"Same features as for Heavy Duty Pipe Wrench, but with ultra-light, high strength, cas...t aluminum alloy body.Rothenberger 70162 Pipe Wrench, Aluminum, 24" Features: 40% weight reduction Conforms to U.S. Standard GGG-W-651-Type I-Class B read more

Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Makita
$1,678.00
at Amazon

Makita's 14-Inch 73cc Industrial Power Cutter has a five stage filtration system with advanced directional air flow which provides... very clean air for better saw performance. It has cushioned operator grips with 4 vibration-absorbtion rubber buffers for increased operator comfort. The water kit assembled to saw can be used with garden hose, gravity feed tank or pressure tank. A micro chip-controlled carburetor is designed to compensate engine timing according to work load. read more

Husqvarna
$1,599.00
at Amazon

Husqvarna power cutter with unique Cut-n-Break method cuts in stages of 2 1/2in. deep with 9in. twin diamond blades, leaving a thi...n core that is easily broken off with included breaking tool. Cutting can continue until required depth is reached, up to 16in. Excellent for indoor use, smaller jobs, flush cutting applications and when user wants to avoid overcutting at corners. Also ideal for cutting pipes in trenches, grooves for cabling, expansion joints and crack renovation. 120V motor has Elgard electronic overload protection and Electronic SoftStart to provide starting with normal, slow-acting fuses. Cutting Depth in. 16, Cutting Length in. 9, Amps 15, Volts 120. Cut-n-Break allows user to cut, in stages, up to 16in. deep Powerful 15 Amp, 1800 Watt 120V electric motor Adjustable blade guard enables flush cutting Ergonomic front handle makes it easy to cut vertically or horizontally Large miter gear delivers durability, minimal power loss and low noise levels read more

Panasonic
$637.00
at Amazon

Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more

Makita
$1,330.00
at Amazon

This burly hammer has a powerful 11 Amp motor and spline drive system to power through the toughest jobs. Switches from rotary ham...mer to hammer-only mode. Air cushion design enables hard-hitting, fast drilling. Hammering Modes Hammering only, hammering w/rotation, Blows Per Minute BPM 2,100, Case Included Yes, Amps 11, Rated RPM 260, Cordless No. 11 Amp motor 260 RPM 2100 blows per minute Rotary Hammering and Hammering-Only modes Spline-type drive system for maximum power All ball and needle bearings for long tool life Large comfortable grip swivels 360 for easy handling Automatic brush cut-out system Air cushion design for hard hitting and fast drilling Torque limiter clutch for smoother operation Factory grease packed for reduced maintenance Includes straight handle, D-handle, depth gauge, bit grease and plastic tool case Model HR5000C read more

Williams
$277.02
at Amazon

All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for gre...ater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry read more

Forrest
$249.00
at Amazon

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut e...dge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.No splinters cross-cutting oak, ply veneers and melamineCuts in all directions- rip, cross-cut, miter, any depth.Cuts all sized grooves 1/4' through 29/32' increments. (Set of plastic adjusting shims also included)Super-hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle-boards. read more

Stanley Proto
$351.12
at Amazon

Stanley J6014C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley Proto
$268.21
at Amazon

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise directio...n (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

Stanley Proto
$265.03
at Amazon

Stanley J6060A Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 10-50 in-lbs Calibrated to +/- 3% clockwise direction... (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping