Pyle Pyle PDMM15 Digital Manometer for Measuring Pressure

The PDMM15 is a digital manometer, used for measuring pressure. Get accurate measurements every single time. Select from up to 11 different measuring units to get what you need. This unit can measure both gauge and differential pressure. It... has a dual LCD with backlight, so it works great even in poor lighting conditions. Maximum pressure: 150 PSI. A soft carrying pouch and flexible tubing are included. A 9 V battery is included. read more

Pyle
$55.22
at Adorama

Pyle PDMM01 Digital Manometer with 11 Units of Measure, 10 PSI Maximum Pressure The Pyle PDMM01 is a digital manometer with measur...e pressure. It can measure in 11 different units, including in H2O, Psi, Mbar, Bar, kPa, inHg, mmHg, Ozin2, ftH2O, cmH2O and read more

Pyle
$35.00
at Adorama

Pyle PSPL03 Mini Sound Level Meter with A Frequency Weighting, 35-100dB Level Range The Pyle PSPL03 Mini Sound Level Meter measure...s from 30 to 100 dB with an accuracy of 3 dB. It uses A-level weighting for environmental noise measuring and other tasks. Ma read more

Pyle
$53.00
at Adorama

Pyle PTHM15 Mini Temperature & Humidity Meter With Dew Point & Wet Bulb Temperature The Pyle PTHM15 Mini Temperature & Humidity Me...ter measures air temperature and humidity on the go with this mini meter. The fast response time with dual display en read more

Pyle

Hand-held metal and voltage detector with LED and audible indicator Locates live cables and metal objects Adjustable detector sens...itivity Requires 1 x 9V battery (not included) read more

Pyle
$211.99
at Amazon

The PDMM15 is a digital manometer, used for measuring pressure. Get accurate measurements every single time. Select from up to 11 ...different measuring units to get what you need. This unit can measure both gauge and differential pressure. It has a dual LCD with backlight, so it works great even in poor lighting conditions. Maximum pressure: 150 PSI. A soft carrying pouch and flexible tubing are included. A 9 V battery is included. read more

Pyle
$131.99
at Amazon

The PMD74 is a microwave leakage detector from Pyle. This device never needs calibration and allows you to accurately and precisel...y measure the amount of radiation emitting from your microwave. Measures from 0 to 9.99 mw/cm2. The PMD74 will automatically signal a warning beep and LED flash if the detected radiation is above safe levels (5 mw/Cm2). Make sure your microwave is functioning properly and get piece of mind with the PMD74. On a 9V battery, the PMD74 operates for one year. read more

Pyle
$49.99
at Amazon

This conveniently sized PDMT38 Digital Multimeter by Pyle is perfect for measuring DC and AC voltage, DC current, resistance, tran...sistor measurement, testing diodes and continuity. This ergonomically designed multimeter features an integrated tilt stand and durable curved rubber sleeve for excellent grip and protection from other gear while stored away. The PDMT38 comes with test leads, a hard rubber case and stand. Rigid construction makes this ideal for use in the field, laboratory, workshop, or for home and hobby applications. All Pyle products are backed by our 1 year warranty. Full range overload protection. 9v battery powered (not included). read more

Pyle
$39.99
at Amazon

This light meter from Pyle measures in lux, utilizing an advanced, long-life silicon photo diode to measure light. Measures 2 time...s per second for quick, accurate info. Data hold function allows you to save current Light Meter Lux readout on the screen. The PLMT21 is equipped free floating sensor giving you full range to take measurements. Max range: 200,000 lux. read more

Pyle
$37.99
at Amazon

The PST43 precision laser tachometer by Pyle, accurately measures RPMs at a stunning range of 2.5 to 99,999. To take a measurement..., apply the reflective marks provided to the surface being measured, then aim the laser, push the side button and the RPM reading is immediately displayed. The 5 digit LCD display makes reading measurements simple and easy. The RPM reading refreshes every second giving you real time measurements. Data is easy to analyze with the Last/Max/Min value memory function. No contact with the shaft or wheel is necessary. Comes with reflective tape and cushioned carrying case. read more

Pyle
$19.99
at Amazon

Digital LCD display - Transistor hFE measurement range of 0 1000 - Read Instructions and warnings before use - Measures AC Voltage... range of 200V 600V with overload protection of 600V rms - Indicates continuity with beep sound - Measures DC Voltage range of 200mV 600V with overload protection of 600V - Auto Polarization - Measures DC current range of 200A 10A with overload protection provided by 250mA/250V fuse - Refreshes display every 2-3 seconds - Measures Resistance from 200O to 2MO - 9v battery supply (not included). read more

Extech Instruments
$219.99
at Amazon

1000 Amp True RMS AC/DC clamp meter has built-in non-contact IR thermometer with laser pointer. Measures AC/DC voltage, resistance..., frequency, capacitance and more. Peak function captures inrush currents and voltage transients. Zero function for DC current. Also measures temperatures with Type K thermometer. Dimensions L x W x H in. 10 1/2 x 4 x 2, Charger Included No, Storage Case Included No, Thermostate Range F Noncontact readings from -58-518F, Includes Type K bead probe, Laser Guide Yes, Batteries Required Yes, Single, Pair, or Set Single, Battery Type 9V, Common Usage Clamp meter w/diagnostics thermometer, Temperature Scale Celsius, Fahrenheit. 1.7in. 43mm circular jaw opening for conductors up to 750MCM or two 500MCM True RMS current and voltage measurements Diode Continuity Type K thermocouple measures temperatures from -4F to 1400F -20 to 760F Peak function captures inrush currents and voltage transients Data hold freezes display Min/max Zero function for DC current Autoranging with manual range button Auto power off CE certified CAT II-600V read more

Amprobe
$274.95
at Amazon

<div class="aplus"><p>The Amprobe SM-CAL1 is a sound meter calibrator for maintaining the accuracy of a sound level meter. It fits... sound meters with microphones that have a diameter of up to 1/2 inch. It produces two fixed sound level signals, 94 decibels (dB) and 114 dB, and has an output frequency of 1,000 hertz (Hz). The calibrator operates on a 9V battery (included), and a low-battery indicator shows when the unit's batteries need to be changed. It meets European conformity (CE) directives and complies with American National Standards Institute (ANSI) and International Electrotechnical Commission (IEC) standards. The SM-CAL1 weighs 0.6 lb. (285 g), and it measures 4.9 x 1.9 x 0.5 inches (125 x 48 x 12.7) mm, H x D, where H is height, the vertical distance from the lowest to highest point, and D is diameter, the distance from left to right across the widest part of a circle).</p><p>Sound meters measure sound pressure levels both to check acoustic fidelity and to verify compliance with noise pollution regulations in health and safety codes. The meters are used in a range of environments, including homes, schools, airports, automotive and machine shops, concert halls, recording studios, and hospitals. There are two classes of sound level meters. Type 1 sound meters have a wider frequency response and a tighter tolerance than type 2 sound level meters, and they are commonly used in applications that require precise measurements, such as research and law enforcement. Type 2 sound meters are less precise than type 1 meters and are used for taking general measurements, such as measuring noise levels in a machine shop. Sound level meters are weighted for frequency response according to their intended use. The most commonly used weightings are A, C, and Z. The A weighting imitates the response of the human ear to soft or moderate noise levels and can be used in most environmental noise measurement applications. The C weighting imitates the response of the human ear to loud noises and can be used in noisy environments. The Z weighting measures flat frequency response between 10Hz and 20kHz and is often used for reference measurements. </p><p> Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA</p><p><b>What?s in the Box?</b> <ul><li>SM-CAL1 sound meter calibrator</li><li>(1) 9V battery (installed)</li> <li>Instructions</li></ul></p></div> read more

Starrett
$668.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...ints seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

Starrett
$1,311.00
at Amazon

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact po...ints seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12-Inch (1-300mm). read more

CST/Berger
$409.00
at Amazon

CST/berger 55-SLVP24ND Automatic level with 24x magnification, Includes hard-shell carrying case with dual latches, plumb bob, all...en wrench, adjusting pin, tripod, rod, and instruction manual. Sturdy metal housing with rubber reinforcement. Large focusing knob. read more

Starrett
$300.00
at Amazon

<div class="aplus"><p> The Starrett 434M-300 Combination Set has a square head, center head, reversible protractor head, and 300 m...m blade that has graduations in 1 mm and 1/2 mm on both sides, with numbered graduations every 10 mm. The protractor head is cast iron with a satin chrome finish on the reading surface and black enamel finish elsewhere. It has revolving turrets with direct-reading double graduations of 0 to 180° in opposite directions, for accurate reading of angles above or below the blade. It is reversible, with shoulders on both the front and back for reading on both sides.</p><p>The blade is made of hardened steel with a satin chrome finish, and the square and center heads are forged, hardened steel with a smooth black enamel finish. The square head has a scriber, a 90° square face, and a 45° miter face. It can be used for scribing right angles and parallel lines, or as a tri-square, miter, depth gauge, height gauge, or level. The center head accurately locates the center of cylindrical or square work. All heads have reversible bolt locks, and the square head and protractor head each have a spirit level. The combination set comes in a protective case.</p><p> Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. </p> <p> The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. </p></div> read more

Starrett
$236.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

Starrett
$305.00
at Amazon

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates..., this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but may be used less. This results in the goal of all good craftsmen - better accuracy and greater efficiency. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping