Refine By
Proto
$24.90 $26.34
at Shoplet.com

Triple stitched bindings. Thick long wearing waist ties.

Proto

These long needle nose pliers provide improved holding power, and less gripping effort. Gain easy access to confined, restricted a...reas. This tool features plastisol grips for added comfort. Overall Length: 11 9/16 in. Jaw Length: 2 13/16 in. Jaw Width: 23/32 in. Jaw Thickness: 13/32 in. Jaw Shape: Needle Nose. Material: Forged Alloy Steel. (Proto 240G) read more

Proto

This screw extractor can be used to remove a broken bolt or a broken stud from a tapped hole. Use a tap holder or wrench on extrac...tor to turn out broken part. Drive into the end of the broken pipe or fitting. Dia.: 21/32 in. (Proto 9527) read more

Proto

This 12 point combination wrench has a unique arc design that increases surface contact. Its Torqueplus fastening system drives of...f fastener body, more easily removing damaged fasteners. Its Anti-Slip Design (ASD) has a locking groove that prevents slippage and knuckle injury. No. of Points: 12. Opening Size: 5/8 in. Head Width: 1 21/64 in (open), 15/16 in (box). Head Thickness: 13/32 in (box), 19/64 in (open). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 8 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1220ASD) read more

Proto

Designed for a balance of strength and reach, this seven piece impact socket set utilizes a solid wall design that helps you work ...in tight spaces while still standing up to tough torquing conditions, so no matter where the job needs to get done, you can do it. Drive Size: 1/2 in. Drive Type: Square. Tip Size: 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in. Tip Type: Hex. Includes: Socket Bar, Socket Clips. Material: Forged Alloy Steel. Finish: Black Oxide. Measuring System: Inch. Locking Type: Pin. Quantity: 7 per bar. (Proto 74152) read more

Proto

This eight inch wrench features a extra wide jaw capacity with a square jaw opening that provides strength and a tight fit. Its no...n-reflective ProtoBlack finish is for use where non-plated products are required. Opening Size: 1 1/8 in [Max]. Opening Type: Jaw. Head Angle: 15 degrees. Overall Length: 8 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 708S) read more

Proto

This wrench has an open-end at one end and a socket wrench at the other. Its fiteen degrees offset provides a clearance for hands ...during use. It is constructed of forged alloy steel for strength and durability. No. of Points: 12. Opening Size: 1 1/8 in. Opening Type: Open/Box. Head Width: 2 17/64 in (open), 1 21/32 in (box). Head Thickness: 15/32 in (open), 41/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 14 1/8 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1236ASD) read more

Proto

The torqueplus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn... worn, rounded, or rusted fasteners. Proto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. The TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners. Drive Size: 1/2 in. No. of Points: 8. Drive Type: Square. Opening Size: 3/4 in. Head Width: 1 5/16 in (opening side), 1 5/16 in (drive side). Overall Length: 3 1/4 in. Measuring System: Inch. Locking Type: Pin. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 7330H) read more

Proto

This size stamped on this 9/16 inch extractor refers to drill bit size to be used with that extractor. This tool is great for remo...ving pieces of a broken pipe. Use a tap holder or wrench on extractor to turn out broken part. Dia.: 9/16 in. (Proto 9526) read more

Proto

Industrial quality black oxide finish is ideal for applications where chipping and flaking cannot occur. Tough black oxide finish ...resists rust and corrosion. The square jaw opening of this adjustable wrench provides strength and a tight fit. Opening Size: 1 1/2 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 12 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 712S) read more

Proto

This 15/32 inch screw extractor is a great tool for removing broken or seized screws. Straight fluted extractors have less wedging... effect than tapered screw extractors, so have less tendency to lock the screws into place. Dia.: 15/32 in. (Proto 9525B) read more

Proto

Proto impact sockets incorporate the Torqueplus wrenching system. This high performance design allows the socket to contact the fa...stener away from the corner while also dispensing stress over a large area. This tool is ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. Drive Size: 1/2 in. No. of Points: 6. Drive Type: Square. Opening Size: 1 1/8 in. Head Width: 1 5/8 in (opening side), 1 5/8 in (drive side). Overall Length: 3 1/2 in. Measuring System: Inch. Locking Type: Pin. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 7336H) read more

Proto

The Proto 10 piece drive metric standard hex bit socket set features chrome alloy steel construction to provide strength. The Bit ...Sockets feature a chrome finish that resists corrosion, and this Set includes tip sizes that range from 1/8 inch to 3/8 inches. These tools come equipped inside of a blow molded box. Drive Size: 3/8 in, 1/2 in. Drive Type: Square. Tip Type: Hex. Includes: (7) 3/8 in. Dr. Hex Bits 4 - 10mm, (3) 1/2 in. Dr. Hex Bit Sockets 12, 14, 17mm, Blow Molded Box. Material: Forged Alloy Steel. Finish: Nickel Chrome. Measuring System: Metric. Locking Type: Ball. Quantity: 10 per box. (Proto 4900MA) read more

Proto

A combination wrench has a Anti-Slip Design (ASD) with a locking groove that prevents slippage and knuckle injury. Its unique arc ...design increases surface contact. A shank is positioned at the center of box end, and reduces the tendency of the wrench to cock. No. of Points: 12. Opening Size: 9/16 in. Opening Type: Open/Box. Head Width: 1 3/16 in (open), 27/32 in (box). Head Thickness: 9/32 in (open), 23/64 in (box). Head Angle: 15 degree Open Side. Offset Angle: 15 degree Box Side. Overall Length: 7 1/2 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1218ASD) read more

Proto

Reduce the risk of fastener rounding with this combination wrench. Its Torqueplus fastening system drives off fastener body, more ...easily removing damaged fasteners. The shank is positioned at the center of box end, reduces the tendency of the wrench to cock. No. of Points: 12. Opening Size: 1 5/16 in. Opening Type: Open/Box. Head Width: 2 41/64 in (open), 1 27/32 in (box). Head Thickness: 17/32 in (open), 47/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 16 3/4 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1242) read more

Proto

The Torqueplus fastening system of the 12 point combination wrench drives off fastener body, more easily removing damaged fastener...s. The shank is positioned at the center of box end, reduces the tendency of the wrench to cock. No. of Points: 12. Opening Size: 3/4 in. Opening Type: Open/Box. Head Width: 1 37/64 in (open), 1 3/32 in (box). Head Thickness: 11/32 in (open), 15/32 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 8 7/8 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1224ASD) read more

Proto

The tough black oxide finish of this protoblack wrench resists rust and corrosion. Industrial quality black oxide finish is ideal ...for applications where chipping and flaking cannot occur. The square jaw opening of this adjustable wrench provides strength and a tight fit. Opening Size: 2 1/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 18 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 718S) read more

Proto

This eighteen inch adjustable wrench allows for smooth, fast and accurate jaw adjustments with . Its precise laser-etched indicato...r markings on the jaw opening make for easy tightening and adjusting of fasteners. Opening Size: 2 1/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 18 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Satin. (Proto 718) read more

Proto

This fifteen inch adjustable wrench features rugged I-beam style handle and reinforced stress areas with a radius corner design. I...ts satin finish provides corrosion resistance and a slip resistant grip for maximum durability. Opening Size: 1 11/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 15 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Satin. (Proto 715) read more

Proto

This six inch adjustable wrench has a square jaw opening that provides greater strength and better fit. It also features a rugged ...I-beam style handle and reinforced stress areas as well as a radius corner design. Its satin finish provides corrosion resistance and a slip resistant grip. Opening Size: 15/16 in [Max]. Opening Type: Jaw. Head Angle: 15. Overall Length: 6 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Satin. (Proto 706) read more

Proto

These slip joints are precision made of fine polished, high carbon drop forged steel. Its patented permaLock fastener eliminates n...ut and bolt failures. These are shear-type wire cutter. Overall Length: 9 9/16 in. Jaw Length: 2 3/8 in. Jaw Width: 1 7/64 in. Jaw Thickness: 15/32 in. Jaw Shape: Combination. No. of Adj.: 2. Cut Type: Shear Wire Cutter. Material: Forged Alloy Steel. (Proto 280G) read more

Proto

Use this striking wrench to loosen or set large fasteners. Its heavy box walls provide greater torque transmission while its short... handle permits work in close quarters. The offset provides clearance for knuckles and obstructions. No. of Points: 12. Opening Size: 1 13/16 in. Opening Type: Box. Head Width: 2 21/32 in. Head Thickness: 1 3/16 in. Offset Angle: 45 degree Box Side. Overall Length: 13 7/16 in. Handle Type: Off-Set. Material: Forged Alloy Steel. Finish: Black Oxide. Measuring System: Inch. (Proto 2629SW) read more

Proto

The TorquePlus design of this six point impact socket is a high performance drive configuration which allows for quick and easy so...cket engagement to the fastener flats, not the corners. Its internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners. Drive Size: 1/2 in. No. of Points: 6. Drive Type: Square. Opening Size: 3/4 in. Head Width: 1 7/64 in (opening side), 1 1/8 in (drive side). Overall Length: 3 1/4 in. Measuring System: Inch. Locking Type: Pin. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 7324H) read more

Proto

1/2'' Drive ratchet features a unique floating pawl design that provides superior strength and long life. The thin head design all...ows for easier access to work areas. A reversing lever is designed for quick, one hand operation. . Drive Size: 1/2 in. Drive Type: Male Square. Overall Length: 10 in. No. of Teeth: 24. Ratcheting Angle: 15 degrees. Locking Type: Ball. Material: Alloy Steel. Finish: Polish. (Proto 5449) read more

Proto

The shank of the 12 point combination wrench is positioned at the center of box end, reduces the tendency of the wrench to cock. A...nti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. No. of Points: 12. Opening Size: 1 1/4 in. Opening Type: Open/Box. Head Width: 2 33/64 in (open), 1 3/4 in (box). Head Thickness: 33/64 in (open), 45/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 15 3/8 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1240ASD) read more

Proto

Apply more torque to fastener with this twelve point combination wrench. If features a Torqueplus fastening system that drives off... fastener body, more easily removing damaged fasteners. No. of Points: 12. Opening Size: 15/16 in. Opening Type: Open/Box. Head Width: 1 29/32 in (open), 1 27/64 in (box). Head Thickness: 13/32 in (open), 37/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 11 1/2 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1230ASD) read more

Proto

This 26 piece punch and chisel has a two piece design that allows the tip to have a separate hardness to prevent peening and allow...s the tip to be produced straighter to eliminate binding. Its 20 percent larger striking surface than standard chisels allows the safe use of a larger striking tool and directs more power to the cutting edge. The cutting edge is ground to exact angle for easy cutting. Each tool within the set is hardened, quenched, and tempered to precise specifications. Includes: (2) Center Punches, (1) Prick Punch, (6) Drive Pin Punches 5/64, 7/64, 5/32, 11/64, 13/64, 15/64 in, (5) Starting Punches 3/32, 1/8, 3/16, 7/32, 1/4 in, (9) Cold Chisels 1/4 - 13/16 in, (3) Drift Punches 1/8, 3/16, 1/4 in. Material: Alloy Steel. Finish: Black Oxide. Quantity: 26 per pouch. (Proto 46) read more

Proto

This spud handle wrench is forged from select alloy steel to withstand high-leverage and heavy loads. This wrench features an extr...a-heavy-duty head area to provide excellent strength. Its strong box end designed to turn stubborn nuts and bolts. No. of Points: 12. Opening Size: 1 5/8 in. Opening Type: Box. Head Width: 2 15/32 in. Head Thickness: 1 1/8 in. Offset Angle: 45 degree Box Side. Overall Length: 22 in. Handle Type: Spud - Deep Offset. Material: Forged Alloy Steel. Finish: Chrome. Measuring System: Inch. (Proto 2626) read more

Proto

One-touch size adjustment makes it quick easy to get a solid grip with this fifteen inch adjustable wrench. This tool features a n...on-reflective ProtoBlack finish for use where non-plated products are required. Its heat-treated hardened steel is tough enough for any job. Opening Size: 1 11/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 15 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 715S) read more

Proto

This combination wrench has an opening size of 1/2 inch and a 12 point Torqueplus fastening system. The fastening system drives of...f fastener body, more easily removing damaged fasteners and reduces the risk of fastener rounding. No. of Points: 12. Opening Size: 1/2 in. Opening Type: Open/Box. Head Width: 1 5/64 in (open), 49/64 in (box). Head Thickness: 1/4 in (open), 11/32 in (box). Head Angle: 15 degree Open Side. Offset Angle: 15 degree Box Side. Overall Length: 7 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1216ASD) read more

Proto

Precision in a single tool, on one end the traditional open wrench is used for tightening nuts and bolts; on the other end, a box ...end that allows the application of greater torque force. The open end provides the speed, together with an end angle that permits two action positions, reducing the angle of recovery to 15 degrees. The closed end with 12 points of contact gives the box end head high strength properties. No. of Points: 12. Opening Size: 1 7/16 in. Opening Type: Open/Box. Head Width: 2 57/64 in (open), 2 3/64 in (box). Head Thickness: 37/64 in (open), 51/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 18 1/2 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1246) read more

Proto

The radius corner design and square jaw opening of this adjustable wrench provides greater strength and better fit. This tool has ...a satin finish provides corrosion resistance and a slip resistant grip. Opening Size: 1 1/8 in [Max]. Opening Type: Jaw. Head Angle: 15. Overall Length: 8 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Satin. (Proto 708) read more

Proto

Adjustable wrenches are versatile tools because the size of their opening can be changed by openeing or closing a moveable jawusin...g an adjustable thumbwheel system, which makes it possible to tighten or loosen almost any type of nut or bolt. Its rubber grip provides greater comfort. Opening Size: 1 1/8 in [Max]. Opening Type: Jaw. Head Angle: 15 degrees. Overall Length: 8 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Chrome. (Proto 708G) read more

Proto

The cushion grip on this adjustable twelve inch wrench provides comfort and maximum durability. The tool's extra wide square jaw o...pening provides strength and tight fit. Opening Size: 1 1/2 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 12 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Chrome. (Proto 712G) read more

Proto

The Proto 7 piece drive metric standard hex bit socket set come nicely equipped in a secure blow molded box. These tools feature c...hrome alloy steel construction to provide strength. The Bit Sockets feature a chrome finish that resists corrosion, and this Set includes tip sizes that range from 1/8 inch to 3/8 inches. Drive Size: 3/8 in, 1/2 in. Drive Type: Square. Tip Type: Hex. Includes: (7) 3/8 in. Dr. Hex Bit Sockets 1/8 - 3/8 in, (3) 1/2 in. Dr. Hex Bit Sockets 1/2, 9/16, 5/8 in, Blow Molded Box. Material: Forged Alloy Steel. Finish: Nickel Chrome. Measuring System: Inch. Locking Type: Ball. Quantity: 10 per bar. (Proto 4900A) read more

Proto

This Standard ASD Combination Wrench has a 1-1/16" opening & socket size and a ocking groove to prevent slippage and knuckle injur...y. It is made up of forged alloy steel for maximum durability. No. of Points: 12. Opening Type: Open/Box. Head Width: 2 9/64 in (open), 1 31/64 in (box). Head Thickness: 29/64 in (open), 39/64 in (box). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 13 1/4 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1234ASD) read more

Proto

These convertible retaining ring pliers actually are one pair replacing two for internal or external use. It includes precision fo...rmed and induction hardened fixed tips. The ProTouch grips provide extra comfort for less hand fatigue. Overall Length: 9 1/4 in. Tip Diam: 0.090 in. Jaw Shape: Straight. Tip Type: Straight. Material: Alloy Steel. (Proto 377) read more

Proto

This seven piece chisel set features a kit pouch a various sized chisels that have be hardened, quenched, and tempered to precise ...specifications. Utilize these tools for light chiseling and chipping of tile, mortar, and other masonry materials. Cutting Width: 5/16 in, 3/8 in, 7/16 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in. Includes: Kit Pouch. Tip Type: Straight. Material: Alloy Steel. Applicable Materials: Soft Cast Iron, Brass, Copper, Aluminum, Mild Steel, Bolts, Rivets. Quantity: 7 per pouch. (Proto 86B) read more

Proto

These lineman's pliers have induction hardened cutting edges as well as an insulation crusher. This tool is best utilized for wiri...ng and electrical equipment installation and maintenance. Overall Length: 8 5/8 in. Jaw Length: 1 1/2 in. Jaw Width: 1 3/16 in. Jaw Thickness: 5/8 in. Jaw Type: Diamond Serrated. Material: Forged Alloy Steel. Jaw Shape: Straight. Applications: Wiring and electrical equipment installation, Maintenance. (Proto 268G) read more

Proto

This impact socket adapter is for electric or air powered drive tools. It allows you to work with 3/4 inch square drive sockets us...ing 1 inch handles. This tool is precision machined and heat treated to provide the best combination of hardness, tensile strength and torque strength. Drive Size: 1 in (female square), 3/4 in (male square). Overall Length: 2 7/8 in. Material: Alloy Steel. Finish: Black Oxide. (Proto 7656) read more

Proto

This impact socket bit can be used for the tightening of socket cap screws and bolts using pneumatic / hydraulic impact wrenches. ...This tool has provisions for locking pin and 'O' ring on to the impact wrench. Drive Size: 1/2 in. Drive Type: Square. Tip Size: 5/16 in. Bit Length: 1 3/4 in. Tip Type: Hex. Overall Length: 3 1/4 in. Measuring System: Inch. Locking Type: Pin. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 74415/16) read more

Proto

1/2'' Drive socket is heat treated to handle tough work and features a precision machined tip for proper screw engagement. Forged ...alloy steel body guarantees little damage and morphing during use. . Drive Size: 1/2 in. Drive Type: Square. Tip Size: 1/2 in. Bit Length: 1 7/8 in. Tip Type: Hex. Overall Length: 3 5/8 in. Measuring System: Inch. Locking Type: Ball. Material: Forged Alloy Steel. Finish: Nickel Chrome. (Proto 54411/2) read more

Proto

Square drive adapter is designed to convert a 3/4'' female to 1/2'' male adapter. The adapter is made of alloy steel for resistanc...e to damage are excellent for tough jobs. . Drive Size: 3/4 in (female square), 1/2 in (male square). Overall Length: 2 1/8 in. Locking Type: Ball. Material: Alloy Steel. Finish: Nickel Chrome. (Proto 5453) read more

Proto

Makes damaged screw extraction quick and easy with this 13/16 inch steel screw extractor. Simply put the bit in your drill and use... your drill in reverse to remove the stripped screw. Dia.: 3/4 in. (Proto 9528) read more

Proto

This six inch wrench features a non-reflective ProtoBlack finish for use where non-plated products are required. Its extra wide ja...w capacity provides strength and a tight fit. Opening Size: 15/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degree. Overall Length: 6 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Black Oxide. (Proto 706S) read more

Proto

The 1-1/2" Drive Impact Socket w/ 3-3/4" Opening Size features the high-performance TorquePlus design which enables quick and easy... socket engagement to fastener flats, rather than the corners. This impact socket is most ideal for use on stubborn or damaged fasteners, as well as fasteners made from soft materials. The internal design of this durable impact socket allows the user to more easily turn any rounded, worn, or rusted fasteners. Locking Type. : Pin. Drive Size. : 1-1/2". Drive Type. : Square. Overall Length. : 5". Number of Points. : 6. Finish. : Black Oxide. Opening Size. : 3-3/4". Measuring System. : Inch. Material. : Forged Alloy Steel. Head Width. : 5-1/2" (Opening Side), 3-1/4" (Drive Side). (Proto 577-15060) read more

Proto

Proto Double Faced Sledge Hammer is a useful hand tool for striking metal, concrete, and stone. Sledge hammer is four pounds to pr...ovide a large amount of force while the long 14 inch handle provides a large amount of torque. Handle is gripped for increased comfort for the user during use. Head Weight. : 4 pounds. Head Length. : 5 inches. Handle Length. : 14 inches. Head Material. : Forged Steel. Handle Material. : Fiberglass. (Proto 1435G) read more

Proto

Proto Brass Hammers absorb impact and reduce or eliminate work damage. The non-damaging soft brass head provides an even surface t...o strike. A fiber glass handle means a firmer grip and easier follow through. Head Material:. Brass. Handle Material:. Fiber Glass. Weight:. 4.75 lbs. (Proto 1431G) read more

Proto

This 1-3/8 inch combination wrench features a Torqueplus fastening system drives off fastener body, more easily removing damaged f...asteners. This reduces risk of fastener rounding. Its shank is positioned at the center of box end, reduces the tendency of the wrench to cock. No. of Points: 12. Opening Size: 1 3/8 in. Opening Type: Open/Box. Head Width: 2 49/64 in (open), 1 15/16 in (box). Head Thickness: 25/32 in (box), 35/64 in (open). Head Angle: 15 Open Side. Offset Angle: 15 Box Side. Overall Length: 17 5/8 in. Handle Type: Oval. Material: Forged Alloy Steel. Finish: Satin. Measuring System: Inch. Type: Combination Wrench. (Proto 1244) read more

Proto

The ten inch adjustable wrench has a larger knurl for easier adjustment and tighter jaw fit. The hex jaw design also reduces slipp...age and tightly grips bolt. Its wider handle helps to improves comfort and reduces fatigue while its cushioned grip provides comfort. Opening Size: 1 5/16 in [Max]. Opening Type: Jaw. Head Angle: 15 degrees. Overall Length: 10 in. Handle Type: I-Beam. Material: Forged Alloy Steel. Finish: Chrome. (Proto 710G) read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping