Refine By
Pentek

The BPHE 420 high efficiency bag filters are offered for those critical applications when high efficiency combined with high dirth...olding capacity is required- The Pentek BPHE-420-1 1 micron filter bags are 98% efficient- Polypropylene bags are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms- The BPHE420-1 Filter Bags can withstand temperatures up to 200F (93-3C)- The Pentek BPHE-420-1 bag filter is made of polypropylene microfibers with spun-bonded polypropylene covers- Polypropylene materials are processed into microfibers with diameters of 1-10 microns or more- These fibers are converted into filter material- Microfiber media are covered with spun-bonded polypropylene- Dimensions: 4'' W x 18'' L (102 mm x 457 mm)- Filter Media: Polypropylene microfibers with spun-bonded polypropylene covers- Maximum Flow Rate: 35 gpm- Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating- The maximum rates (gpm water 68 deg- F) are normally only achieved under ideal conditions- SKU: CWD2530 read more

Pentek

This Pentek US-1000 under-sink filter system is suitable for chemical and lead reduction in water filtration applications. It redu...ces the presence of 43 different volatile organic chemicals (VOCs), lead, cysts, mercury, asbestos, methyl tertiary butyl ether (MTBE), and chlorine taste and odor and has a lifespan of 1,000 gallons. The system meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) Standard 42 for the reduction of chlorine taste and odor and Particulate Class I, and Standard 53 for the reduction of asbestos, cysts, lead, mercury, turbidity, MTBE, and VOCs. It measures 15 x 11 x 6.5 inches/381 x 279 x 165mm (H x W x D), and operates at a pressure range of 10 to 125 pounds per square inch (psi). This under-sink filter system is suitable for residential and commercial drinking water filtration.SpecificationsPressure range10 to 125 psiDimensions*15 x 11 x 6.5 inches/381 x 279 x 165mm (H x W x D)VOCs, lead, cysts, mercury, asbestos, MTBE, and chlorine taste and odor reduction1,000 gallonsStandards metNSF/ANSI Standards 42 and 53*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.What's in the Box?US-1000 filter housingP-250A filter cartridge setPost filtration faucetPost filtration hoseHousing wrenchInstallation hardware read more

Pentek

The Pentek P-250A Under Sink Water Filter Set includes both a D-40 sediment filter (white cartridge with green end caps, for the l...eft housing) and D-25 carbon filter (gray cartridge with black end caps, for the right housing). The carbon block ultra-fine filtration removes dirt, sand and other particles from your water, while also reducing unwanted chlorine taste and odor for a better drinking and cooking experience from your kitchen faucet. The P250A also filters MTBE, mercury, volatile organic compounds (VOCs), herbicides and pesticides. This is a low-cost, convenient alternative to bottled water. read more

Pentek

The Pentek P-250 Under Sink Water Filter Set includes both a D-40 sediment filter (white cartridge with green end caps, for the le...ft housing) and D-25 carbon filter (gray cartridge with black end caps, for the right housing). The carbon block ultra-fine filtration removes dirt, sand and other particles from your water, while also reducing unwanted chlorine taste and odor for a better drinking and cooking experience from your kitchen faucet. The P250 also filters mercury, volatile organic compounds (VOCs), herbicides and pesticides. This is a low-cost, convenient alternative to bottled water. read more

Pentek

The Pentek US-1500 Under Sink Water Filtration System is perfect for great tasting, healthier water right at your kitchen sink. Th...is complete system is straightforward water purification at its best. It includes an electronic monitor to remind you when it is time to change your filters. The Pentek US-1500 is like the Culligan SY-2650 Drinking Water Filter System. It is compact and works under most kitchen sinks. This industry standard system makes water filtration easy. read more

Pentek

The Pentek P-250 includes a D40 and D25 filter and is used in several undersink filtration systems by Culligan, American Plumber, ...Pentek, Ametek and other brands including the SY-2650, SY-2500, SY-2300, SY-2000, US-1500, and... read more

Pentek

This Pentek 150424 SW-5 wrench is used to loosen the sumps of filter housings. It is made of strong plastic. This wrench fits the ...sumps of Pentek US-1000, US-1500, AS-301E, RO-3000, and RO-3500 under-sink drinking water systems, which are used for the purification of residential and commercial drinking water.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance. read more

Pentek
$8.98
at Amazon

<div class=?aplus?><p>This Pentek EP-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residen...tial and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 1 gpm</TD><TD>3.4 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>6,000 gallons at 1 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 2-7/8 inches (248 x 73 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$59.66
at Amazon

<div class=?aplus?><p>This Pentek PCF1-20MB water deionization filter cartridge reduces hardness minerals in low flow rate medical..., pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deionization resin that meets Food and Drug Administration (FDA) standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. The cartridge has a capacity of 600 grains, an initial pressure drop of 3.4 pounds per square inch (psi) at a recommended flow rate of 0.50 gallons per minute (gpm), and a temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This water deionization filter cartridge is used for the demineralization of water used in various industrial processes.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Capacity</TD> <TD>600 grains</TD></TR><TR> <TD>Initial pressure drop at 0.50 gpm</TD> <TD>3.4 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Temperature range</TD> <TD>40 to 100 degrees F (4.4 to 37.8 degrees C)</TD></TR><TR> <TD>Maximum dimensions (H x W)</TD> <TD>20 x 2-2/3 inches (508 x 68 mm)</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$56.05
at Amazon

<div class=?aplus?><p>This Pentek 150469 3/4? #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy... sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 3/4? female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10? x 4-1/2? filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Filter cartridge size (H x W) (sold separately)</TD><TD>10 x 4-1/2 inches (254 x 114 mm)</TD></TR><TR><TD>Initial pressure drop at 15 gpm</TD><TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum temperature</TD><TD>100 degrees F (37.8 degrees C)</TD></TR><TR><TD>Maximum pressure</TD><TD>100 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>13-1/8 x 7-1/4 inches (333 x 184 mm)</TD></TR><TR><TD>Materials and structural integrity certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$36.37
at Amazon

<div class=?aplus?><p>This Pentek R30-20BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles ...in residential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>30 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$81.38
at Amazon

<div class=?aplus?><p>This Pentek 150467 20-BB 3/4" #20 Big Blue filter housing with pressure relief is suitable for high-flow and... heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The cap has 1" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20? x 4-1/2" filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Filter cartridge size (H x W) (sold separately)</TD> <TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR><TR> <TD>Initial pressure drop at 15 gpm </TD> <TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum temperature</TD> <TD>100 degrees F (37.8 degrees C)</TD></TR><TR> <TD>Maximum pressure</TD> <TD>90 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>23-3/8 x 7-1/4 inches (594 x 184 mm)</TD></TR><TR> <TD>Materials and structural integrity certification</TD> <TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$25.76
at Amazon

<div class=?aplus?><p>This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in... residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating (pre-filter)</TD><TD>50 microns</TD></TR><TR><TD>Nominal filtration rating (post-filter)</TD><TD>5 microns</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Initial pressure drop at 20 gpm</TD><TD><1 psi</TD></TR><TR><TD>Temperature range</TD><TD>40 to 145 degrees F (4.4 to 62.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$35.30
at Amazon

<div class=?aplus?><p>This Pentek CRE-1 ceramic filter cartridge reduces protozoan cysts and fine sediment in residential drinking... water. It has a nominal (85%) filtration rating of 1 micron, and 99.95% efficiency for the removal of protozoan cysts. This cartridge is made of sintered ceramic media with thermoset polymeric end caps for strength and rigidity. The nitrile butadiene rubber (Buna-N) gasket seals the cartridge against the housing (sold separately). This filter can be cleaned several times with a sponge or nylon brush. The cartridge has an initial pressure drop of 19 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and it operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This ceramic filter cartridge is for use in residential drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>1 micron</TD></TR><TR> <TD>Removal of protozoan cysts</TD> <TD>99.95%</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Initial pressure drop at 1 gpm </TD> <TD>19 psi</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>9-3/4 x 1-7/8 inches (248 x 48 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$417.42
at Amazon

<div class=?aplus?><p>This Pentek 161013 RO-3500 Reverse Osmosis System reduces chlorine taste and odor, dissolved minerals, salts..., lead, selenium, and protozoan cysts in under-sink residential drinking water applications. It can be used to treat chlorinated or non-chlorinated water, and produces up to 7.6 gallons of filtered water per day. The three-stage filtration process uses two carbon filter cartridges and a reverse osmosis (RO) membrane. An integrated electronic water quality monitor indicates when the membrane should be replaced. The system has an operating pressure range of 40 to 100 psi. This reverse osmosis system meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 58 for quality assurance, and is used for the purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Thin-film membrane</TD> <TD>ROM-230TN</TD></TR><TR> <TD>Carbon cartridges</TD> <TD>Culligan D-15 and D-20</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Capacity </TD> <TD>7.6 gallons per day</TD></TR><TR> <TD>Temperature range</TD> <TD>40 to 100 degrees F (4.4 to 37.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Pressure range</TD> <TD>40 to 100 psi</TD></TR><TR> <TD>Maximum system dimensions (H x W x D )</TD> <TD>13-3?4" x 12-3?4" x 4-3?4" (349mm x 324mm x 120mm)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum tank dimensions (H x W x D )</TD> <TD>16-3?4" x 11-1?4" x 11-1?4" (425mm x 286mm x 286mm)</TD></TR><TR> <TD>Contaminant reduction certification</TD> <TD>NSF/ANSI standard 58</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p><h5>What?s in the Box?</h5><ul><li>(3) housings</li><li>Manifold cover</li><li>Storage tank with valve</li><li>Water quality monitor</li><li>RO membrane</li><li>(2) carbon filter cartridges</li><li>Long-reach lead-free faucet</li><li>SW-5 sump wrench</li><li>Installation hardware</li></ul></div> read more

Pentek
$111.92
at Amazon

<div class=?aplus?><p>This Pentek ROM-230T reverse osmosis (RO) membrane reduces chlorine taste and odor, dissolved minerals, salt...s, lead, selenium, and protozoan cysts in residential drinking water. It is made of thin-film composite (TFC) material, and can process 50 gallons of water per day. This reverse osmosis membrane is for use with Pentek RO-3000 and RO-3500 reverse osmosis systems and RO systems made by various manufacturers, which are used for the purification of residential and commercial drinking water.</p> <p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$23.73
at Amazon

<div class=?aplus?><p>This Pentek CBU-10 carbon block filter cartridge for ultraviolet (UV) systems reduces fine sediment, chlorin...e taste and odor, and protozoan cysts in residential drinking water. It has a nominal filtration rating of 0.5 micron at an efficiency of 85%. The cartridge surrounds the quartz UV lamp sleeve in Pentek UV-110 and UVS-110 ultraviolet water treatment systems to provide prefiltration that assures maximum transmittance of UV light through the water. It has a maximum operating temperature of 180 degrees F (82.3 degrees C). This carbon filter cartridge is for use in residential drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>0.5 micron</TD></TR><TR> <TD>Maximum temperature</TD> <TD>180 degrees F (82.3 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>9-1/2 x 2-3/4 inches (242 x 70 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$438.20
at Amazon

<div class=?aplus?><p>This Pentek 163005 UV-110-1 3/4" Ultraviolet System controls microbes in drinking and industrial process wat...er as a supplement to other sterilization methods. It provides a germicidal dose (16,000 microwatt-seconds per square centimeter) of ultraviolet (UV) light at a wavelength of 254 nanometers (nm) to disrupt the microbes? reproductive process. A carbon block pre-filter reduces fine sediment, chlorine taste and odor, and protozoan cysts, which also improves UV transmittance through the water. The sump and cap with 3/4" connections are made of polypropylene for strength and resistance to corrosion and chemicals, and a quartz sleeve protects the UV lamp. A voltage-regulated control module adjusts lamp output, and the entire system can be securely mounted using the wall bracket. The nitrile butadiene rubber (Buna-N) O-rings ensure a watertight seal. The system has a recommended flow rate of 2 gallons per minute (gpm), a maximum operating pressure of 65 pounds per square inch (psi), and an operating temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This ultraviolet water treatment system is for the purification of residential drinking and industrial process water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Recommended flow rate </TD> <TD>2 gpm</TD></TR><TR> <TD>Temperature range</TD> <TD>40 to 100 degrees F (4.4 to 37.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum pressure</TD> <TD>65 psi</TD></TR><TR> <TD>Voltage</TD> <TD>120V at 60 Hz</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>15-1/2 x 5-1/2 inches (394 x 140 mm)</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p><h5>What?s in the Box?</h5><ul><li>10" sump</li> <li>(3) Buna-N O-rings</li> <li>Pentek CBU-10 carbon block filter cartridge</li><li>Teflon sleeve</li><li>Quartz sleeve</li><li>Plunger rod</li><li>3/4" black cap</li><li>Spacer bushing</li><li>Mounting bracket</li><li>UV lamp</li><li>Control module</li><li>SW-2 sump wrench</li></ul></div> read more

Pentek
$34.56
at Amazon

<div class=?aplus?><p>This Pentek 150071 3/4" #10 Standard clear filter housing with pressure relief is suitable for residential, ...commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Filter cartridge size (H x W) (sold separately)</TD> <TD>10 x 2-1/2 inches (254 x 63.5 mm)</TD></TR><TR> <TD>Initial pressure drop at 10 gpm </TD> <TD>1 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum temperature</TD> <TD>125 degrees F (51.7 degrees C)</TD></TR><TR> <TD>Maximum pressure</TD> <TD>125 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>12-5/8 x 5-1/4 inches (321 x 133 mm)</TD></TR><TR> <TD>Materials and structural integrity certification</TD> <TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$10.64
at Amazon

<div class=?aplus?><p>This Pentek 151120 OR-34 O-ring is used to seal water filter housings with 3/4-inch inlet and outlet ports. ...It is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. This O-ring fits Pentek Standard and 3G Standard filter housings, which are used in various applications, such as drinking water purification, swimming pools, and industrial processes, among others.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$14.52
at Amazon

<div class=?aplus?><p>This Pentek DGD-2501 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in re...sidential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating (pre-filter)</TD><TD>25 microns</TD></TR><TR><TD>Nominal filtration rating (post-filter)</TD><TD>1 micron</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR><TD>Temperature range</TD><TD>40 to 145 degrees F (4.4 to 62.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>10 x 4-1/2 inches (254 x 114 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$26.84
at Amazon

<div class=?aplus?><p>This Pentek DGD-2501-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in... residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating (pre-filter)</TD><TD>25 microns</TD></TR><TR><TD>Nominal filtration rating (post-filter)</TD><TD>1 micron</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Initial pressure drop at 20 gpm</TD><TD><1 psi</TD></TR><TR><TD>Temperature range</TD><TD>40 to 145 degrees F (4.4 to 62.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$30.51
at Amazon

<div class="aplus"><p>This Pentek GAC-BB drinking water filter cartridge reduces chlorine taste and odor and other unwanted tastes... and odors in general water filtration applications. The filter medium consists of granular activated carbon for reduction of unwanted tastes and odors. The construction of the cartridge allows water to pass through the entire length of the carbon bed, while an internal expansion pad minimizes channeling, or bypass, ensuring maximum contact with the filter medium. A built-in 20-micron post filter reduces the presence of carbon fines and other suspended particles in the filtered water. This filter cartridge has an initial pressure drop of 6 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). It is suitable for general residential and commercial water filtration applications.</p><h4>Specifications</h4><table border=1 width="800" cellpadding=2 cellspacing=0><tr bgcolor="#dfe1e0"><td>Nominal filtration rating</td><td>20 microns in the post filter</td></tr><tr><td>Initial pressure drop at 2 gpm</td><td>6 psi</td></tr><tr bgcolor="#dfe1e0"><td>Temperature range</td><td>40 to 125 degrees F (4.4 to 51.7 degrees C)</td></tr><tr><td>Dimensions*</td><td>9-3/4 x 4-1/2 inches/248 x 114mm (H x W)</td></tr><tr bgcolor="#dfe1e0"><td>Chlorine taste and odor reduction</td><td>12,500 gallons at 2 gpm</td></tr></TABLE><br/><p>*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$15.62
at Amazon

<div class=?aplus?><p>This Pentek ECP5-BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale p...articles in residential and commercial water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 20 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 4-1/2 inches (248 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$14.30
at Amazon

<div class=?aplus?><p>This Pentek R50-BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in... residential and commercial water. It has a nominal filtration rating of 50 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>50 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 4-1/2 inches (248 x 114 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$22.53
at Amazon

<div class=?aplus?><p>This Pentek S1-20BB pleated cellulose filter cartridge reduces sand, dirt, silt, rust, and scale particles i...n residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of cellulose media pleated around a polypropylene core for strength. It has an initial pressure drop of 1.2 pounds per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>20 microns</TD></TR><TR> <TD>Initial pressure drop at 10 gpm </TD> <TD>1.2 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Recommended flow rate</TD> <TD>35 gpm</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 145 degrees F (4.4 to 62.8 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$22.61
at Amazon

<div class=?aplus?><p>This Pentek ChlorPlus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and co...mmercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The cartridge is made of bonded powdered activated carbon (PAC) media with a polyolefin core and shell and polyethylene outer netting. A Santoprene gasket provides a watertight seal. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 50,000 gallons at a flow rate of 1 gallon per minute (gpm), and reduce 3 ppm chloramines by at least 75% in up to 1,000 gallons at a flow rate of 1 gpm. The filter has an initial pressure drop of 6 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon block filter cartridge is used for treatment of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>1 micron</TD></TR><TR> <TD>Initial pressure drop at 1 gpm </TD> <TD>6 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Chlorine reduction capacity</TD> <TD>50,000 gallons at 1 gpm</TD></TR><TR> <TD>Chloramine reduction capacity</TD> <TD>1,000 gallons at 1 gpm</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR> <TD>Maximum dimensions (H x W)</TD> <TD>9-3/4 x 2-7/8 inches (248 x 73 mm)</TD></TR></TABLE><br/><p> The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%. Chloramine reduction capacity is the minimum total amount of water for which chloramines at a concentration of 3 ppm are reduced by 75%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$66.31
at Amazon

<div class=?aplus?><p>This Pentek GAC-20BB carbon filter cartridge reduces chlorine taste and odor in residential and commercial d...rinking water. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 25,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made granular activated carbon (GAC) filter media encased in polystyrene with a spun polypropylene post filter. The nitrile butadiene rubber (Buna-N) and Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5.0 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Post filter</TD><TD>20 microns</TD></TR><TR><TD>Initial pressure drop at 4 gpm</TD><TD>5.0 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>25,000 gallons at 4 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$103.22
at Amazon

<div class=?aplus?><p>This Pentek FloPlus-20BB carbon block filter cartridge reduces fine sediment, chlorine taste and odor, and p...rotozoan cysts in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 50,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of modified bonded powdered activated carbon (PAC) filter media that provides efficient cyst reduction with a flow rate and dirt-holding capacity comparable to those of a 10-micron filter. The Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 53 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>0.5 microns</TD></TR><TR><TD>Initial pressure drop at 4 gpm</TD><TD>4 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Removal of protozoan cysts</TD><TD>99.95%</TD></TR><TR><TD>Chlorine reduction capacity</TD><TD>50,000 gallons at 4 gpm</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-5/8 inches (508 x 118 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Cyst reduction certification</TD><TD>NSF/ANSI standard 53</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$25.02
at Amazon

<div class=?aplus?><p>This Pentek NCP-BB carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odo...r in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 500 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 8 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>10 microns</TD></TR><TR> <TD>Initial pressure drop at 8 gpm </TD> <TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Chlorine reduction capacity</TD> <TD>500 gallons at 2 gpm</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>9-3/4 x 4-1/2 inches (248 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$31.53
at Amazon

<div class=?aplus?><p>This Pentek EPM-BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in reside...ntial and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 15,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>10 microns</TD></TR><TR><TD>Initial pressure drop at 2 gpm</TD><TD>5 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>15,000 gallons at 2 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 4-5/8 inches (248 x 118 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$12.36
at Amazon

<div class=?aplus?><p>This Pentek CC-10 coconut carbon filter cartridge reduces chlorine taste and odor, methyl tertiary butyl eth...er (MTBE), certain volatile organic compounds (VOCs), and sediment in residential and commercial drinking water. It has a nominal (85%) filtration rating of 20 microns. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 7500 gallons at a flow rate of 1 gallon per minute (gpm). The filter media is made of coconut shell based granular activated carbon (GAC) for greater VOC reduction than standard GAC. The media is enclosed in a polystyrene outer casing and end caps, and there is a spun propylene post-filter to reduce carbon fines and other suspended particles. The nitrile butadiene rubber (Buna-N) and Santoprene gaskets seal the cartridge against the housing (sold separately). The filter operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>20 microns</TD></TR><TR> <TD>Initial pressure drop at 1 gpm </TD> <TD>4.5 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Chlorine reduction*</TD> <TD>7500 gallons at 1 gpm</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>9-3/4 x 2-7/8 inches (248 x 73 mm)</TD></TR><TR> <TD>Materials certification</TD> <TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$48.81
at Amazon

<div class=?aplus?><p>This Pentek NCP-20 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste... and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 1,000 gallons at a flow rate of 4 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 1 pound per square inch (psi) at a recommended flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>10 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD>1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>1,000 gallons at 4 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-1/2 inches (508 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$9.79
at Amazon

<div class=?aplus?><p>This Pentek PD-5-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commerci...al drinking water and industrial fluid applications. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C). This polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 5 gpm</TD><TD><2 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 175 degrees F (4.4 to 79.4 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-1/2 inches (510 x 64 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$15.20
at Amazon

<div class=?aplus?><p>This Pentek EPM-20 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in reside...ntial and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.0 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h5>Specifications</h5><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>10 microns</TD></TR><TR><TD>Initial pressure drop at 2 gpm</TD><TD>1.0 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>6,000 gallons at 2 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-7/8 inches (508 x 73 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$8.95
at Amazon

<div class=?aplus?><p>This Pentek R30 pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in re...sidential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>30 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 2-5/8 inches (248 x 67 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$18.00
at Amazon

<div class=?aplus?><p>This Pentek EP-20 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residen...tial and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 12,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 2 gpm</TD><TD>3.4 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>12,000 gallons at 2 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-7/8 inches (508 x 73 mm)</TD></TR><TR><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$11.24
at Amazon

<div class=?aplus?><p>This Pentek C2 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and od...or in residential drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 1,250 gallons at a flow rate of 0.5 gallons per minute (gpm). The cartridge is made of cellulose media that has been impregnated with powdered activated carbon (PAC), with a polyester backing and external polyethylene netting for strength. It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in residential drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>5 microns</TD></TR><TR> <TD>Initial pressure drop at 2 gpm </TD> <TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Chlorine reduction capacity</TD> <TD>1,250 gallons at 0.5 gpm</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>4-78 x 2-1/2 inches (124 x 64 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$109.62
at Amazon

<div class="aplus"><p>This Pentek 155263 RFFE20-BB radial flow iron reduction cartridge is suitable for reducing the presence of d...issolved iron in water supplies with concentrations up to 3 parts per million (ppm) for improved taste, less staining, and reduced chance of pipe and water heater damage. It is designed for use with a #20 Pentek Big Blue filter housing (not included), and operates at a maximum temperature of 100 degrees F (37.8 degrees C). It has a lifespan of 26,000 gallons for water supplies with an iron concentration of 3 ppm, and a longer lifespan at lower concentrations. This iron reduction cartridge is suitable for residential and commercial filtration applications, with pre-sediment and post-carbon treatment recommended for best results.</p><h4>Specifications</h4><table border=1 width="800" cellpadding=2 cellspacing=0><tr bgcolor="#dfe1e0"><td>Lifespan at 3 ppm</td><td>26,000 gallons</td></tr><tr><td>Lifespan at 2 ppm</td><td>40,000 gallons</td></tr><tr bgcolor="#dfe1e0"><td>Lifespan at 1 ppm</td><td>80,000 gallons</td></tr><tr><td>Lifespan at 0.5 ppm</td><td>160,000 gallons</td></tr></TABLE><br/><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$32.26
at Amazon

<div class=?aplus?><p>This Pentek ECP1-20BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale... particles in residential and commercial water. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>1 micron</TD></TR><TR><TD>Initial pressure drop at 20 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$15.46
at Amazon

<div class=?aplus?><p>This Pentek ECP5-10 pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale p...articles in residential and commercial water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 2-5/8 inches (248 x 67 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$51.05
at Amazon

<div class=?aplus?><p>This Pentek CBC-BB carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cys...ts in residential and commercial drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 50,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4.6 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>0.5 micron</TD></TR><TR><TD>Initial pressure drop at 2 gpm</TD><TD>4.6 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Removal of protozoan cysts</TD><TD>99.95%</TD></TR><TR><TD>Chlorine reduction capacity</TD><TD>50,000 gallons at 2 gpm</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 4-5/8 inches (248 x 118 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$30.66
at Amazon

<div class=?aplus?><p>This Pentek P5-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in resid...ential, commercial, and municipal drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of 0.6 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD>0.6 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 145 degrees F (4.4 to 62.8 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-3/8 inches (508 x 60 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$110.23
at Amazon

<div class=?aplus?><p>This Pentek CBC-20BB carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan c...ysts in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 150,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 8.5 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>0.5 microns</TD></TR><TR><TD>Initial pressure drop at 4 gpm</TD><TD>8.5 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Removal of protozoan cysts</TD><TD>99.95%</TD></TR><TR><TD>Chlorine reduction capacity</TD><TD>150,000 gallons at 4 gpm</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 4-5/8 inches (248 x 118 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Materials certification</TD><TD>NSF/ANSI standard 42</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$20.76
at Amazon

<div class=?aplus?><p>This Pentek FloPlus-10 carbon block filter cartridge reduces fine sediment, chlorine taste and odor, and pro...tozoan cysts in residential drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 10,000 gallons at a flow rate of 1 gallons per minute (gpm). This cartridge is made of modified bonded powdered activated carbon (PAC) filter media that provides efficient cyst reduction with a flow rate and dirt-holding capacity comparable to those of a 10-micron filter. The Santoprene (TPE, thermoplastic elastomer) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 53 for quality assurance, and is used for purification of residential and commercial drinking water.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>0.5 microns</TD></TR><TR><TD>Initial pressure drop at 1 gpm</TD><TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Removal of protozoan cysts</TD><TD>99.95%</TD></TR><TR><TD>Chlorine reduction capacity</TD><TD>10,000 gallons at 1 gpm</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 180 degrees F (4.4 to 82.2 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 2-7/8 inches (248 x 73 mm)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Cyst reduction certification</TD><TD>NSF/ANSI standard 53</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$29.31
at Amazon

<div class=?aplus?><p>This Pentek ECP20-20BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scal...e particles in residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>20 microns</TD></TR><TR><TD>Initial pressure drop at 20 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 4-1/2 inches (508 x 114 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$26.79
at Amazon

<div class=?aplus?><p>This Pentek 153128 #10 clear housing sump fits caps for Pentek #10 Standard clear filter housings with any i...nlet and outlet size, and same size caps made by several other manufacturers. It is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition. This sump meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use with Pentek #10 Standard clear filter housings, which are used in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$12.47
at Amazon

<div class=?aplus?><p>This Pentek ECP5-20 pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale p...articles in residential and commercial water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>5 microns</TD></TR><TR><TD>Initial pressure drop at 10 gpm</TD><TD><1 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR><TD>Maximum dimensions (H x W)</TD><TD>20 x 2-5/8 inches (508 x 67 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$10.49
at Amazon

<div class=?aplus?><p>This Pentek NCP-10 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste... and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 225 gallons at a flow rate of 1 gallon per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 3 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Nominal filtration rating</TD><TD>10 microns</TD></TR><TR><TD>Initial pressure drop at 3 gpm</TD><TD>2 psi</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Chlorine reduction capacity</TD><TD>225 gallons at 1 gpm</TD></TR><TR><TD>Temperature range</TD><TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Maximum dimensions (H x W)</TD><TD>9-3/4 x 2-1/2 inches (248 x 64 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

Pentek
$16.16
at Amazon

<div class=?aplus?><p>This Pentek C1-20 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and... odor in residential drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 5,000 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of cellulose media that has been impregnated with powdered activated carbon (PAC), with a polyester backing and external polyethylene netting for strength. It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in residential drinking water purification.</p><h4>Specifications</h4><TABLE BORDER=1 WIDTH="800" CELLPADDING=2><TR BGCOLOR="#dfe1e0"> <TD>Nominal filtration rating</TD> <TD>5 microns</TD></TR><TR> <TD>Initial pressure drop at 5 gpm </TD> <TD>1 psi</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Chlorine reduction capacity</TD> <TD>5,000 gallons at 2 gpm</TD></TR><TR> <TD>Operating temperature range</TD> <TD>40 to 125 degrees F (4.4 to 51.7 degrees C)</TD></TR><TR BGCOLOR="#dfe1e0"> <TD>Maximum dimensions (H x W)</TD> <TD>20 x 2-1/2 inches (508 x 64 mm)</TD></TR></TABLE><br/><p>The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.</p><p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.</p><p>Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.</p></div> read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping