OTC OTC Tools and Equipment OTC Tools and Equipment 6897 3-Piece Spark Plug Socket Set

This kit combines the most popular spark plug sockets. Each socket has a 3/8" drive end for use with a ratchet or breaker bar. Socket ends have soft rubber inserts to hold and protect the spark plug during removal and installation. No. 6898... works on GM, Chrysler, Ford, and many import vehicles with... read more

OTC
$68.27
at Sears

A/C Clutch Hub Remover/Installer Set. For damage-free removal and installation of the clutch hubs on these air conditioning compre...ssors: GM-Harrison DA-6, HR-5, V-5, A-6, and early R4; Nippondenso Ford/Chrysler A590, C171, FS-6, 6P148A (new style) read more

OTC
OTC
$88.17
at Amazon

This socket set with chrome vanadium steel sockets cover most of the SUV and light truck applications. Sockets have 1/2 inch squar...e drive, allowing use of a torque wrench, ratchet, or breaker bar. A blow-molded plastic storage case keeps set contents organized and protected from loss. read more

OTC
OTC
$61.95
at Amazon

There is such a wide variety of retaining pliers, available individually or in sets, to handle many applications. This particular... kit includes convertible retaining pliers, for internal or external rings. read more

OTC
OTC
$40.95
at Amazon

No worries, these are replacement tips for the 7300 and 7301 snap ring pliers. They are straight tip internal and external. Very... simple to replace on the pliers. read more

OTC
OTC
$25.95
at Amazon

These tools provide maximum engagement to reduce the chance of fastener and tool damage. Authentic TORX fasteners and drivers are ...manufactured to very critical, proprietary tolerances. Our bit sockets are produced with gauging that is available only to licensed TORX drive manufacturers. "Look alike" bit sockets may be produced with inferior materials and may not meet the exacting specifications which can cause substandard engagement, fastener damage or premature tool wear. Professional technicians trust specialty fastener tools with the TORX trademark, from OTC Tools. All OTC bit sockets are manufactured with premium quality tool grade steel and are manufactured as two-piece construction for even stronger performance. These bit sockets give today?s service professionals the ability to have the right tool required for applications using the most comillimeteron specialty fasteners found in your shop today. These high quality bit sockets will provide a lifetime of performance when used with hand tools. The warranty is voided if these bit sockets are ever used with impact tools. read more

OTC
KD Tools
$92.34
at Sears

Get the job done even faster with reversible ratcheting combination wrenches. Change direction with the flip of a lever without ha...ving to remove the wrench from the fastener. Set includes sizes 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" read more

GearWrench
$32.25
at Sears

Set includes the following 12 Pt. sockets:1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" and 1". ...Packaged on slide rail read more

Sunex
$80.74
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel ? the best choice for strength and durability Radius c...orner design - to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2" drive, 12 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm and 24mm sockets. read more

Sunex
$88.55
at Sears

Features and Benefits: Forged from high quality Chrome-Molybdenum alloy steel for long life Each impact socket features a radius c...orner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners Packaged in a durable heavy duty blow mold case for convenient storage and transport Fully Guaranteed This 26 piece 1/2" drive metric impact socket set is designed to extend the life of fasteners! Sunex Impact Sockets tackle the toughest jobs with solid durability that keeps them pounding job after job. This set includes the following metric impact socket sizes ranging from 10 to 36mm. read more

Lisle
$34.19
at Sears

For use in restricted areas. Ideal for use in areas where a T-handle won't fit. Set of 8 sockets fits all number and fractional ta...ps through 1/2 in. and 1/8 in. NPT taps manufactured to M.C.T.I. standards. Also fits metric taps through 12mm manufactured to M.C.T.I. standards. Sockets #1 through #4 use a 1/4 in. drive, while the rest use a 3/8 in. drive. read more

GearWrench
$40.08
at Sears

Get the job done faster with ratcheting combination wrenches. Set includes sizes 8mm, 10mm, 12mm, 13mm, 14mm, 15mm and 18mm

GearWrench
$41.39
at Sears

GearWrench 5-Piece ratcheting wrench set, SAE. Consisting of: 9012 3/8-Inch combination ratcheting wrench, 9014 7/16-Inch combinat...ion ratcheting wrench, 9016 1/2-Inch combination ratcheting wrench, 9018 9/16-Inch combination ratcheting wrench, and 9020 5/8-Inch combination ratcheting wrench. Standard pattern ratcheting combination wrenches need as little as 5 degrees to move a fastener vs 30 degrees for standard wrench. Gearwrench surface drive design of box end provides for stronger grip on wrenches and less fastener rounding. Nickel chrome finish for long corrosion resistant tool life. read more

GearWrench
$119.53
at Sears

Get the job done faster with ratcheting combination wrenches. Set includes sizes 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16m...m, 17mm, 18mm, 19mm Includes plastic tray for storing and organizing tools read more

GearWrench
$126.79
at Sears

Features and BenefitsUnique beam design allows you to apply force to the flat of the wrench which reduces hand fatigue and increas...es surface contact by over 500%. Up to 25% longer beam to access those hard to reach fasteners Surface Drive Plus provides stronger grip on fasteners and delivers up to 25% more torque Surface Drive on ratcheting box end improves box end strength and reduces fastener rounding First tool recognized by the Arthritis Institute to significantly reduce the risk of carpal tunnel. This 12 piece Metric X-Beam Ratcheting Combination Wrench Set. Includes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm. Unique beam design allows you to apply force to the flat of the wrench which reduces hand fatigue and increases surface contact by over 500%. Up to 25% longer beam to access those hard to reach fasteners. Surface Drive Plus provides stronger grip on fasteners and delivers up to 25% more torque. Surface Drive on ratcheting box end improves box end strength and reduces fastener rounding. First tool recognized by the Arthritis Institute to significantly reduce the risk of carpal tunnel. read more

Craftsman
$24.29
at Sears

Fix Anything with the Standard 12 Pt. Wrench Set From Craftsman With 12 different sizes, the Craftsman Combination Wrench Set is a... must-have for homeowners and professionals alike. When you are working on tough jobs, simply reach for this well-rounded set to find the right sized wrench. Bring home this standard 12 pt. Wrench Set from Craftsman as it is a useful tool to have in your car, garage or workshop. When you are working in narrow and tight spaces, the 12 point box end makes for easy turns. The box end paired with the open end makes this versatile tool set useful for a wide range of applications. Made from forged steel, these wrenches will be a part of your toolbox for a lifetime. They are available in standard sizes so they can be used for different purposes. Take care of all the loosening and tightening jobs that needs to be done in your home or workshop with this all-purpose wrench set. The Craftsman Combination Wrench Set is an essential that should be part of your tool set Includes 12 wrenches in standard sizes of 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8 in. to be used for all your needs Wrenches are combination type, with box end and open end Lifetime Craftsman warranty read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping