OTC OTC Metric Hex Key Wrench

Metric Hex Key Wrench Set. These long-arm hex key wrenches provide added. leverage and accessibility. Rust-resistant black oxide finish. There are 9 sizes, from 1.5 mm to 10 mm. Available separately: 12 mm, 14 mm, 17 mm, and. 19 mm.

OTC
$100.55
at Zoro

Socket Set, SAE and Metric, Drive Size 1/4 In., 3/8 In., 1/2 In., Std. Socket Point Styles Included 6, Deep Socket Point Styles In...cluded None, Flex Socket Point Styles Included None, Number of Pieces 52, Standard Tool(Accessory Needed for Tethering),... read more

OTC
OTC
$167.94
at Zoro

Puller, Hydraulic, Number of Pieces 1, Capacity 17 1/2 Tons, Screw Size 18 x 20, For Use With G1631131 And G2146164

OTC
OTC
$544.53
at Zoro

Socket Set, SAE, Drive Size 3/4 In., Std. Socket Point Styles Included 6, Deep Socket Point Styles Included None, Flex Socket Poin...t Styles Included None, Number of Pieces 6, Standard Tool(Accessory Needed for Tethering), Sockets Included 2 In. 6 pt.... read more

OTC
OTC
$288.50
at Zoro

Puller, Hydraulic, Number of Pieces 1, Capacity 30 Tons, Screw Size 1 1/47 x 24, For Use With G2775595

OTC
OTC
$29.89
at Zoro

Crimpwell Angled Wire Crimper, Capacity 22 to 10 AWG, Overall Length 9 In., For Use With Soft wire solid or stranded 1022 AWG, Cut...s Yes, Strips No, Adjustable Manual, Handle Type Protective Grips, Features Protective Grips Handle, Angled Design read more

OTC
OTC
$23.20
at Zoro

Locknut Socket, Drive Size 3/4 In., Number of Points 6, Socket Depth Deep, SAE, Size 33/4 In., Standard Tool(Accessory Needed for ...Tethering), Overall Length 31/2 In., Material High Strength Steel, Drive Type Square, Output Type Hex read more

OTC
OTC
$84.85
at Zoro

Locknut Socket, Drive Size 3/4 In., Number of Points 6, Socket Depth Deep, SAE, Size 21/4 In., Standard Tool(Accessory Needed for ...Tethering), Overall Length 5 In., Material Heat Treated Alloy Steel, Drive Type Square, Output Type Hex read more

OTC
OTC
$20.91
at Zoro

Locknut Socket, Drive Size 3/4 In., Number of Points 6, Socket Depth Deep, SAE, Size 23/32 In., Standard Tool(Accessory Needed for... Tethering), Overall Length 5 In., Material High Strength Steel, Drive Type Square, Output Type Hex read more

OTC
OTC
$19.85
at Zoro

Locknut Socket, Drive Size 3/4 In., Number of Points 6, Socket Depth Deep, SAE, Size 29/16 In., Standard Tool(Accessory Needed for... Tethering), Overall Length 5 In., Material High Strength Steel, Drive Type Square, Output Type Hex read more

OTC
OTC
$48.42
at Zoro

Locknut Socket, Drive Size 1 In., Number of Points 8, Socket Depth Deep, Metric, Size 100mm, Standard Tool(Accessory Needed for Te...thering), Overall Length 5 In., Material High Strength Steel, Drive Type Square, Output Type Square read more

OTC
Oregon
$8.43 $9.99
at Sears

Swiss made file and guide includes two 5/32 in. files and a file guide that will help make accurate, consistent filings to your sa...w chain. read more

Armstrong
$7.99
at Sears

Manufactured to industrial specifications assuring a thin wall design with precise nut end dimensions. Radius corner design engage...s the flats of the fastner, not the corners, providing 15% to 20% more torque. Also prevents rounding of fasteners and enhances the turning of worn, rounded fasteners. EYE-D laser etched markings optimise the size identification as well as provide SAE/Metric differentiation, even in low light conditions. read more

Armstrong
$18.84 $27.99
at Sears

28 mm 6pt. 3/4 in. dr. EYE-D Impact socket manufactured to industrial specifications. Impact sockets are designed for greater stre...ngth under the condition of shock loading produced by impact guns. read more

Armstrong
$19.99
at Sears

9 mm Full Polish Combination wrench is heat treated oil quenched and tempered for hardness and strength.

GearWrench
$8.99
at Sears

Open end provides stronger grip on fasteners, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size s...tamped on both sides and head of wrench. read more

Craftsman Professional
$6.99
at Sears

Craftsman Professional screwdrivers have four-sided cushion grips with turn imprint, which improves control and torque. Blades are... of high alloy steel and are nickel-chrome plated to resist corrosion. Every screwdriver tip is precision machined for tight tolerance and fastener fit. The custom-designed handles are constructed of dual materials with a hard center core for strength. Each screwdriver exceeds all ASME/ANSI standards and is fully guaranteed. T30 x 6, weight: .22 lbs. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping