OTC OTC 7998 Fuel Pump Module Spanner Wrench for Chrysler

OTC Fuel Pump Module Spanner Wrench for Chrysler Removes and installs the fuel pump retaining ring that holds the fuel pump module onto the gas tank. It works on most 1994-2005 Chrysler vehicles and 1995-2004 Jeep vehicles. It is similar to... Miller 6856. read more

OTC
$33.17 $48.99
at Wayfair

Features and Benefits: Features:.047'' 45 Degree Tip Convertible Snap Ring Pliers 30 day warranty on material and workmanship Dime...nsions: Overall Height - Top to Bottom: 2.7 Inches Overall Width - Side to Side: 4 Inches Overall Depth - Front to Back: 10 Inches Overall Product Weight: 0.2 Pounds Special Offer: 10 Issues of Fast Company A $10 Value - Included with your purchase (Subscription and Rebate Info) read more

OTC
OTC
$34.64 $45.23
at Wayfair

Features and Benefits: Features: Feature a 1/2" square drive 54mm hex locknut socket designed for use on front wheel adjusting nut...s found on Toyota FJ, LN, and RN models Can be used with an extension and torque wrench for accurate tightening Heavy-Duty 54mm Hex Locknut Socket Wt., 1 lb., 8 oz.This heavy-duty locknut socket is a new addition to the OTC line of task Tamers. For use on rounded or standard hex nuts found on the most popular light-duty trucks on the road. Unlike the competition, this socket is backed by the famous OTC Lifetime Marathon Warranty against defects in materials and workmanship. Lifetime warranty does not cover abuse Show Additional Info read more

OTC
OTC
$29.66 $65.07
at Wayfair

Features and Benefits: Features: <font face=''Arial''>Can be used with most of the puller attachments<font face=''Arial''>This is ...a basic 5 lb. slide hammer. It gives the extra muscle for really stubborn jobs. Which can be a great help! This can attached to any of the pullers. 5 lb. Slide Hammer <font face=''Arial''>Durable construction for stubborn jobs Lifetime warranty does not cover abuse read more

OTC
OTC
$313.95
at Amazon

OTC Accutorq 0-150 in. pounds Dial Torque Wrench torque wrench features a large easy-to-read dial scale with memory needle and has... chrome-plated steel surrounding the bezel to protect the scale lens and needle. Meets all federal specifications. It includes molded plastic case. One-year warranty. 0-150 in. pounds Accutorq dial torque wrench. read more

OTC
OTC
$819.95
at Amazon

OTC 36 inch Giant Adjustable Wrench Giant adjustable wrench and rated to withstand 5,000 feet pounds of torque. The really big job...s call for really big tools. These wrenches will handle 42 bolt sizes from 1-3/8 inch to 4-3/4 inch. read more

OTC
OTC
$394.95
at Amazon

OTC Heavy-Duty Adjustable Hook Spanner Wrench Some jobs require beefier tools. Here's a wrench to fill that need. It's drop-forged... and features extra heavy construction and a 3/4 inch thick 11-position hook jaw that's capable of gripping fasteners from 4-3/4 inch to 12-3/4 inch O.D. Handle is 25-3/4 inch long and 15/16 inch in diameter. read more

OTC
OTC
$259.95
at Amazon

OTC Accutorq 50-250 feet pounds Clikker Torque Wrench precision torque wrenches make a loud click when you've reached the torque s...etting. They feature ratcheting heads all-metal construction permanently roll-marked scales and soft-grip rubber handles that enable you to firmly grasp the wrench for right- or left-hand torqueing. It includes molded plastic case. One-year warranty. 50-250 feet pounds Accutorq Clikker torque wrench. read more

OTC
OTC
$899.95
at Amazon

OTC Accutorq 100-600 feet pounds Clikker Torque Wrench precision torque wrenches make a loud click when you've reached the torque ...setting. They feature ratcheting heads all-metal construction permanently roll-marked scales and soft-grip rubber handles that enable you to firmly grasp the wrench for right- or left-hand torqueing. It includes molded plastic case. One-year warranty. 100-600 feet pounds Accutorq Clikker torque wrench. read more

OTC
OTC
$207.95
at Amazon

OTC Adjustable Hook Spanner Wrench Replaces many fixed-size wrenches needed to service industrial tractors and other equipment. Th...eir drop-forged jaws adjust to 11 positions for a capacity of 4-3/4 inch to 12-3/4 inch O.D. Handle is 24 inch long and 1 inch in diameter. Spanner wrench with one 3/8 inch thick jaw. read more

OTC
OTC
$162.95
at Amazon

OTC External Straight Tip Snap Ring Pliers Snap-ring pliers are a tool designed to install and remove snap rings, which are small ...metal rings that hold in a bearing or other assembly item by setting into a machined groove. The snap rings are common in car engine parts as well as in motorcycle and bicycle shocks and forks. While the snap-ring pliers are not a tool that will be used often, they are an important addition to a tool box because a snap ring is difficult or impossible to remove or install without them. 16 inch long read more

OTC
Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Makita
$1,678.00
at Amazon

Makita's 14-Inch 73cc Industrial Power Cutter has a five stage filtration system with advanced directional air flow which provides... very clean air for better saw performance. It has cushioned operator grips with 4 vibration-absorbtion rubber buffers for increased operator comfort. The water kit assembled to saw can be used with garden hose, gravity feed tank or pressure tank. A micro chip-controlled carburetor is designed to compensate engine timing according to work load. read more

Husqvarna
$1,599.00
at Amazon

968388404 Features: -Husqvarna K3000 Electric Cut-N-Break Saw.-An excellent choice for flush cutting, i.e. cutting tight against w...alls and floors.-Well suited for indoor use and smaller jobs where you want to avoid overcutting at the corners.-Ideal for cutting pipes in trenches, grooves for cabling, expansion joints and for crack renovation.-Specially developed, twin 9'' Blade provide high cutting speed and power.-The ergonomic front handle facilitates both vertical and horizontal cutting.-The convenient, patented design of the rear handle makes operation easier.-Adjustable Blade Capacity enables flush cutting.-Elgar , the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.-Electronic Soft start provides starting with normal, slow-acting fuses.-Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.-Blade Diameter: 9''.-Max RPM (no load): 4500.-Weight (include cable and Blade): 21.8 lbs. Specifications: -Motor: Electric 120 V.-Rated output: 20 amp.-Power: 2.7 HP. Dimensions: -Efficient electric cutter with convenient method for cutting up to 16'' deep.-The Cut-n-Break method allows 16'' deep cuts at a very low tooling cost. read more

Panasonic
$584.99
at Amazon

Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more

Makita
$1,330.00
at Amazon

Powerful 11.0 AMP motor delivers 2,100 BPM for the most demanding applications

Williams
$277.02
at Amazon

All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for gre...ater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry read more

Malco
$363.00
at Amazon

Compound leverage shear cuts through 20 gauge metal studs and runner faster, easier and more economically than any other tool on t...he market. Shear completes cut in one easy stroke without deforming metal channel. Die assembly assures that cutting action is clean and precise. Hollow ground hardened steel blade can be resharpened or replaced. A 36 In. (91 cm) long handle provides additional leverage making cutting with this shear almost effortless. Lightweight and portable enough to be where you want it, when you want it. Model SRC24A cuts 3 basic channel sizes 1-5/8, 2-1/2 & 3-5/8 In. (4, 7, 9 cm) stud and accommodating runners. Shear features rugged all steel and bolt construction. Handle has red vinyl comfortable grips. read more

Stanley Proto
$351.12
at Amazon

Stanley J6014C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley Proto
$268.21
at Amazon

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise directio...n (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

Stanley Proto
$265.03
at Amazon

Stanley J6060A Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 10-50 in-lbs Calibrated to +/- 3% clockwise direction... (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping