Oshlun Oshlun SBF-090048 9-Inch 48 Tooth TCG Saw Blade with 1-Inch Arbor for Mild Steel and Ferrous Metals

Oshlun
$109.99
at Amazon

Oshlun SBNF-150110 15-Inch 110 Tooth TCG Saw Blade with 1-Inch Arbor for Aluminum and Non Ferrous MetalsOshlun's non ferrous metal... blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The 10-inch and larger also feature copper plugged expansion slots for reduced noise and vibration while the 7-1/4-inch features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$64.99
at Amazon

Oshlun SBSS-100072 10-Inch 72 Tooth TCG Saw Blade with 5/8-Inch Arbor for Solid SurfaceOshlun's solid surface blades have been des...igned to leave swirl free cuts in solid surface materials, such as: Dupont Corian?«, Avonite?«, Wilsonart?«, Fountainhead?« and Gibraltar?«. They also produce smooth cuts in hard plastics such as Plexiglas?«. The triple chip tooth grind and zero degree hook angle work together to leave a high quality cut at an affordable price. Other features include a heavy duty plate, anti-vibration slots, and copper plugged expansion slots for less noise and vibration. All trademarks and trade names are property of their respective owners. read more

Oshlun
$64.99
at Amazon

Oshlun SBP-100080 10-Inch 80 Tooth MTCG Saw Blade with 5/8-Inch Arbor for PlasticsOshlun's no-melt plastic blade was designed to l...eave smooth, clean cuts in acrylics, PVC, and other plastics. It also produces smooth cuts in laminates. The special modified triple chip grind and side clearance angles work together to leave a premium quality cut without melting or chipping. This blade produces less heat keeping the cut edge crisp with significantly reduced chip-welding potential. Other features include a heavy duty plate, anti-vibration slots, and copper plugged expansion slots for less noise and vibration. read more

Oshlun
$63.99
at Amazon

Our sliding miter and radial arm blades have been designed for cutting all types of hardwood, softwood, and plywood with sliding m...iter and radial arm saws. They feature precision ground micro grain carbide tips, a thin kerf, and a negative hook angle for added safety. Great for crosscutting applications where a smooth cut is needed. read more

Oshlun
$59.99
at Amazon

Oshlun SBR-140030 14-Inch 30 Tooth FTG Saw Blade with 1-Inch Arbor (7/8-Inch and 20mm Bushings) for Rescue and DemolitionOshlun's ...rescue and demolition blades feature a negative hook angle and impact resistant carbide tips. This allows them to cut through most building materials including roofing, shingles and non ferrous metals, as well as wood with embedded nails. These blades are very popular with firefighters for rescue operations and general demolition work. WARNING: Never use these blades on multi-purpose cutoff saws, including gas powered, unless the saw has a guard that completely covers both the upper and lower half of the blade. This guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Use with extreme caution and at your own risk. read more

Oshlun
$35.99
at Amazon

Oshlun SBW-085060 8-1/2-Inch 60 Tooth Negative Hook Finishing ATB Saw Blade with 5/8-Inch Arbor for Sliding Miter SawsOshlun's sli...ding miter and radial arm blades have been designed for cutting all types of hardwood, softwood, and plywood with sliding miter and radial arm saws. They feature precision ground micro grain carbide tips, a thin kerf, and a negative hook angle for added safety. Great for crosscutting applications where a smooth cut is needed. read more

Oshlun
$34.99
at Amazon

Oshlun SBNF-080060 8-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Arbor (Diamond Knockout) for Aluminum and Non Ferrous MetalsOshlun'...s non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Blade features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$33.99
at Amazon

Oshlun SBF-082548 8-1/4-Inch 48 Tooth TCG Saw Blade with 1-Inch Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous MetalsOshlun's... ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. read more

Oshlun
$26.99
at Amazon

Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Arbor (Diamond Knockout) for Aluminum and Non Ferrous MetalsOsh...lun's non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The 10-inch and larger also feature copper plugged expansion slots for reduced noise and vibration while the 7-1/4-inch features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Makita
$1,678.00
at Amazon

Makita's 14-Inch 73cc Industrial Power Cutter has a five stage filtration system with advanced directional air flow which provides... very clean air for better saw performance. It has cushioned operator grips with 4 vibration-absorbtion rubber buffers for increased operator comfort. The water kit assembled to saw can be used with garden hose, gravity feed tank or pressure tank. A micro chip-controlled carburetor is designed to compensate engine timing according to work load. read more

Husqvarna
$1,599.00
at Amazon

968388404 Features: -Husqvarna K3000 Electric Cut-N-Break Saw.-An excellent choice for flush cutting, i.e. cutting tight against w...alls and floors.-Well suited for indoor use and smaller jobs where you want to avoid overcutting at the corners.-Ideal for cutting pipes in trenches, grooves for cabling, expansion joints and for crack renovation.-Specially developed, twin 9'' Blade provide high cutting speed and power.-The ergonomic front handle facilitates both vertical and horizontal cutting.-The convenient, patented design of the rear handle makes operation easier.-Adjustable Blade Capacity enables flush cutting.-Elgar , the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.-Electronic Soft start provides starting with normal, slow-acting fuses.-Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.-Blade Diameter: 9''.-Max RPM (no load): 4500.-Weight (include cable and Blade): 21.8 lbs. Specifications: -Motor: Electric 120 V.-Rated output: 20 amp.-Power: 2.7 HP. Dimensions: -Efficient electric cutter with convenient method for cutting up to 16'' deep.-The Cut-n-Break method allows 16'' deep cuts at a very low tooling cost. read more

Panasonic
$584.99
at Amazon

Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more

Makita
$1,330.00
at Amazon

Powerful 11.0 AMP motor delivers 2,100 BPM for the most demanding applications

Williams
$277.02
at Amazon

All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for gre...ater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry read more

Malco
$363.00
at Amazon

Compound leverage shear cuts through 20 gauge metal studs and runner faster, easier and more economically than any other tool on t...he market. Shear completes cut in one easy stroke without deforming metal channel. Die assembly assures that cutting action is clean and precise. Hollow ground hardened steel blade can be resharpened or replaced. A 36 In. (91 cm) long handle provides additional leverage making cutting with this shear almost effortless. Lightweight and portable enough to be where you want it, when you want it. Model SRC24A cuts 3 basic channel sizes 1-5/8, 2-1/2 & 3-5/8 In. (4, 7, 9 cm) stud and accommodating runners. Shear features rugged all steel and bolt construction. Handle has red vinyl comfortable grips. read more

Stanley Proto
$351.12
at Amazon

Stanley J6014C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley Proto
$268.21
at Amazon

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise directio...n (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

Stanley Proto
$265.03
at Amazon

Stanley J6060A Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 10-50 in-lbs Calibrated to +/- 3% clockwise direction... (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping