Refine By
Oshlun
$63.99
at Amazon

Our sliding miter and radial arm blades have been designed for cutting all types of hardwood, softwood, and plywood with sliding m...iter and radial arm saws. They feature precision ground micro grain carbide tips, a thin kerf, and a negative hook angle for added safety. Great for crosscutting applications where a smooth cut is needed. read more

Oshlun
$35.99
at Amazon

Oshlun SBW-085060 8-1/2-Inch 60 Tooth Negative Hook Finishing ATB Saw Blade with 5/8-Inch Arbor for Sliding Miter SawsOshlun's sli...ding miter and radial arm blades have been designed for cutting all types of hardwood, softwood, and plywood with sliding miter and radial arm saws. They feature precision ground micro grain carbide tips, a thin kerf, and a negative hook angle for added safety. Great for crosscutting applications where a smooth cut is needed. read more

Oshlun
$33.99
at Amazon

Oshlun SBF-082548 8-1/4-Inch 48 Tooth TCG Saw Blade with 1-Inch Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous MetalsOshlun's... ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. read more

Oshlun
$14.99
at Amazon

Our oscillating tool blades are the best value on the market with similar blades selling for 2 or even 3 times more. The tapered s...ealant cutter is great for removing virtually all caulking and sealants with ease and works especially well in deep joints. The Uni-Fit mount system is compatible with FEIN MultiMaster, Dremel Multi-Max, Bosch Max Multi-X, Craftsman NEXTEC, Skill Multi-Tasker, Milwaukee M12, oscillating tools with 3/8-Inch round arbors, and many more. The new design also allows 45 degree angle cutting with the MultiMaster. Notes: Not compatible with FEIN Super Cut, Rockwell SoniCrafter, or Porter-Cable. All trademarks and trade names are property of their respective owners. Sold as 1 pack. read more

Oshlun
$8.99
at Amazon

Oshlun SBM-072518 7-1/4-Inch 18 Tooth ATB Deck and Nail Saw Blade with 5/8-Inch Arbor (Diamond Knockout)Oshlun's deck and nail bla...de features expansion slots, heat vents and a reinforced shoulder design. It also features specially formulated tungsten carbide tips to ensure a long cutting life. It fits nearly all 7-1/4? portable saws, including worm drive machines and is great for cutting pressure treated lumber, recycled lumber and flooring with hidden or embedded nails. This blade is very popular with remodelers and contractors due to its rugged design and fast cutting ability. read more

Oshlun
$34.99
at Amazon

Oshlun SBNF-080060 8-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Arbor (Diamond Knockout) for Aluminum and Non Ferrous MetalsOshlun'...s non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Blade features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$21.99
at Amazon

Oshlun SBNF-054050 5-3/8-Inch 50 Tooth TCG Saw Blade with 20mm Arbor (5/8-Inch and 10mm Bushings) for Aluminum and Non Ferrous Met...alsOshlun's non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$26.99
at Amazon

Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Arbor (Diamond Knockout) for Aluminum and Non Ferrous MetalsOsh...lun's non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The 10-inch and larger also feature copper plugged expansion slots for reduced noise and vibration while the 7-1/4-inch features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$64.99
at Amazon

Oshlun SBSS-100072 10-Inch 72 Tooth TCG Saw Blade with 5/8-Inch Arbor for Solid SurfaceOshlun's solid surface blades have been des...igned to leave swirl free cuts in solid surface materials, such as: Dupont Corian?, Avonite?, Wilsonart?, Fountainhead? and Gibraltar?. They also produce smooth cuts in hard plastics such as Plexiglas?. The triple chip tooth grind and zero degree hook angle work together to leave a high quality cut at an affordable price. Other features include a heavy duty plate, anti-vibration slots, and copper plugged expansion slots for less noise and vibration. All trademarks and trade names are property of their respective owners. read more

Oshlun
$109.99
at Amazon

Oshlun SBNF-150110 - 15" 110 Tooth TCG Saw Blade with 1" Arbor for Aluminum and Non Ferrous Metals Oshlun's non ferrous metal blad...es have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The 10" and larger also feature copper plugged expansion slots for reduced noise and vibration while the 7-1/4" features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. read more

Oshlun
$64.99
at Amazon

Oshlun SBP-100080 10-Inch 80 Tooth MTCG Saw Blade with 5/8-Inch Arbor for PlasticsOshlun's no-melt plastic blade was designed to l...eave smooth, clean cuts in acrylics, PVC, and other plastics. It also produces smooth cuts in laminates. The special modified triple chip grind and side clearance angles work together to leave a premium quality cut without melting or chipping. This blade produces less heat keeping the cut edge crisp with significantly reduced chip-welding potential. Other features include a heavy duty plate, anti-vibration slots, and copper plugged expansion slots for less noise and vibration. read more

Oshlun
$59.99
at Amazon

Oshlun SBR-140030 14-Inch 30 Tooth FTG Saw Blade with 1-Inch Arbor (7/8-Inch and 20mm Bushings) for Rescue and DemolitionOshlun's ...rescue and demolition blades feature a negative hook angle and impact resistant carbide tips. This allows them to cut through most building materials including roofing, shingles and non ferrous metals, as well as wood with embedded nails. These blades are very popular with firefighters for rescue operations and general demolition work. WARNING: Never use these blades on multi-purpose cutoff saws, including gas powered, unless the saw has a guard that completely covers both the upper and lower half of the blade. This guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Use with extreme caution and at your own risk. read more

Oshlun
$104.99
at Amazon

Our oscillating tool blades are the best value on the market with similar blades selling for 2 or even 3 times more. The universal... sealant cutter is great for removing virtually all caulking and sealants with ease. The mount system is designed to fit the FEIN Super Cut. Notes: Not compatible with FEIN MultiMaster, Rockwell SoniCrafter, or Dremel Multi-Max. All trademarks and trade names are property of their respective owners. Sold as 25 pack. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping