Nicholson

  • sale

  • price

    $ to $
  • brand

    MORE+
  • store

    MORE+
  • Clear all
Refine By
Nicholson
$21.99

Rectangular shaped file is narrow for detail finishing or working in tight areas. Double cut on 2 sides with safe edges.Technical ...InformationFeatures: Rectangle in shape Safe edges Tapers in thickness Notes: Approximately 0.135" thick, 0.36" wide File... read more

Nicholson
$14.99

These Swiss Cut, round handle needle files are made to exacting measurements for precise detail work. Double Cut. Technical Inform...ationFeatures: Quality needle file used by toolmakers, jewelers, gunsmiths Knurled handle Notes: Approximately 0.105"... read more

Nicholson
$109.99

Set includes; 10" flat bastard, 10" mill bastard, 10" flat smooth, 10" half round bastard, 10" square bastard, 10" round bastard, ...7" slim taper, file card, used to clean file teeth and a convenient roll up vinyl carrying case. Technical... read more

Nicholson
$11.79

These Mill Files feature a rectangular cross section and are perfect for sharpening mill or circular saws. Technical InformationFe...atures: Flat shape Notes: Approximately 0.15" thick, 0.98" wide tapering to 0.71" File length is measured exclusive of... read more

Nicholson
$20.99

These are extra narrow, double-cut files for getting into those hard-to-reach areas for final parts fitting. They cut on two sides... and have one safe edge, so they are great for square notch, extractor and ejector fitting.Technical InformationMaterial:... read more

Nicholson
$19.99

These are extra narrow, double-cut files for getting into those hard-to-reach areas for final parts fitting. They cut on two sides... and have one safe edge, so they are great for square notch, extractor and ejector fitting.Technical InformationMaterial:... read more

Nicholson
$17.99

Designed to cut faster than regular mill files for lathe filing, these rectangular-shaped, single-cut, safe-edge files are just th...e ticket for filing the turning marks off of a barrel for that smoother-than-glass finish. Technical InformationFeatures:... read more

Nicholson
$16.99

A clean file cuts better. These combination card/brushes are designed especially to remove metal particles from files. One side ha...s synthetic bristles, the other steel wire bristles. A few strokes removes all of the metal slivers, resulting in better... read more

Nicholson
$17.99

Similar to Pillar and Pillar Narrow Files but narrower in length for extremely tight spaces and fine detail work. Double cut on tw...o sides with safe edges. 4" long. Technical InformationFeatures: Rectangle in shape Safe edges Tapers in thickness Notes:... read more

Nicholson
$15.29

Rectangular shape like a Hand File but only 2/3 as wide. Double cut on 2 sides only with safe edges. Technical InformationFeatures...: Rectangle in shape Safe edges Tapers in thickness Notes: Approximately 0.1" thick, 0.47" wide File length is measured... read more

Nicholson
$16.99

Designed to cut faster than regular mill files for lathe filing, these rectangular-shaped, single-cut, safe-edge files are just th...e ticket for filing the turning marks off of a barrel for that smoother-than-glass finish. Technical InformationFeatures:... read more

Nicholson
$16.50

The Nicholson hand file has a square shape with double-cut American pattern teeth for filing slots, corners, and keyways. The file... tapers slightly toward the point to ease access into slots. It has double-cut American pattern teeth on all sides for...... read more

Nicholson
$71.91

The Nicholson 9-Piece File set contains a wide assortment of files that are great for both home and professional use. All files co...me with rubber-coated handles for easy use with a non-slip grip. Files come in a canvas pouch for easy storage and... read more

Nicholson
$5.99

Item: Chainsaw File, Pattern: American, Profile Shape: Round, Cut Type: Double, Length: 8in, Finish: Natural, Diameter: 5/32in, Ha...ndle Design: Tang, Recommended Handle: Mfr. No. 21520N, Application: For Sharpening Chainsaw Chain read more

Nicholson
$40.57

Double-cut on sides, single-cut on edges. Rectangular in cross section and taper slightly towards point in width. Used by machinis...ts, machinery builders, ship and engine builders, repairmen, and others who require rapid removal of metal Color: As Shown. read more

Nicholson
$20.93

The Nicholson half-round hand file has an ergonomic handle and double-cut American pattern teeth on both the round and flat sides ...for use on curved and flat surfaces. The double-cut teeth provide rapid material removal. An attached rubber-coated... read more

Nicholson
$34.61

Features Cut faster than regular mill files and leave a smoother finish Made on flat blanks in bastard-cut Rapid, free cutting fil...es designed for lathe filing Safe edges to protect shoulder or dog Specifications Cut Type - Bastard Cut Length - 14 in.,... read more

Nicholson
$14.56

Round File, Pattern: American, Profile Shape: Round, Cut Type: Bastard/Single, Length: 10in, Finish: Natural, Diameter: 3/8in, Han...dle Design: None, Application: For Manufacturers of Taps, Drills, Reamers, Ball Bearings, Gears read more

Nicholson
$7.64

Round shape. American pattern. Spiral cut enables more material to be removed with each stroke, reducing amount of strokes to prod...uce keen edge. Color: Multi. read more

Nicholson
$52.69

File Set, American Pattern, Number of Pieces 5, Natural Finish, Length 6 In., 8 In. and 10 In., Cut Type Bastard, Profile Shape Ha...lf Round and Round, Handle Design Ergonomic, 0 Threads per Inch, Includes (5) Files, Ergonomic Handles and Pouch read more

Nicholson
$17.36

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. Us...ed on concave, convex and flat surfaces. Rounded on one side, flat on opposite. Back are double cut. Highlights:Used on... read more

Nicholson
$25.81

The Nicholson mill hand file has a rectangular shape and single-cut American pattern teeth on the sides and edges for sharpening m...ill or circular saws, draw filing, and finishing metals. The file tapers slightly toward the point to ease access into... read more

Nicholson
$19.59

Specification: Cut Type - Bastard Cut Tooth Pattern - Edges - Safe, Flat - Double Cut Cross Section Shape - Rectangular Tool Shape... - Taper to Point in Width Style - American Pattern Applicable Materials - Most Metals Quantity - 12 per box Color: As Shown. read more

Nicholson
$55.94

Features: Made for filing saws with 60 degree angle teeth. Triangular shape, edges set and cut for filing gullets between saw teet...h, tapers slightly towards the point. Single Cut American Pattern Length - Xslim x 6 in. Color: As Shown. read more

Nicholson
$28.05

The Nicholson wood rasp file has a half-round shape with coarse (also called bastard) American pattern rasp-cut teeth for aggressi...ve removal of wood or soft materials on curved surfaces. The file tapers slightly toward the point in width to ease... read more

Nicholson
$155.42

The Nicholson half-round needle file with handle has double-cut Swiss pattern teeth on both the flat and round sides for precision... filing of straight surfaces, curved surfaces, and corners in fine work. The file tapers slightly toward the point to ease... read more

Nicholson
$18.45

In 1864, the Nicholson File Company became the first successful manufacturer of machine-made files. Today, Nicholson is the most r...ecognized brand of files in the world. Over the years, the Nicholson product line has increased in scope and size, and... read more

Nicholson
$30.41

The Nicholson pillar hand file has a rectangular shape with double-cut Swiss pattern teeth on both sides for precision smoothing a...nd shaping of straight surfaces. It has double-cut Swiss pattern teeth on each side for rapid material removal and no...... read more

Nicholson
$18.99

'Flat File, American Pattern, Profile Shape Rectangular, Cut Type Bastard/Double, Length 8 In., Natural, Width 2-1/2 In., Single C...ut Edges, Handle Design Round Ergonomic Rubber, For Tool and Die Makers, Jewelers, Model Makers' read more

Nicholson
$3.99

Chainsaw File, Pattern: American, Profile Shape: Round, Cut Type: Double, Length: 6in, Finish: Natural, Diameter: 5/32in, Handle D...esign: None read more

Nicholson
$53.39

The Nicholson clog-resistant flat hand file has a rectangular shape with curved standard pattern teeth on both sides for smoothing... and shaping straight surfaces in automotive body work. It has curved-cut teeth for fast cutting action, with a rake... read more

Nicholson
$27.64

FILE 16 FLAT BASTARD 406 Used by machinists, machinery builders, ship and engine builders, repairmen, and others who require rapid... removal of metalRectangular in cross section and taper slightly towards point in widthDouble-cut on sides, single-cut on... read more

Nicholson
$14.72

File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sha...rpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height betwe read more

Nicholson
$21.37

The Nicholson mill hand file has a rectangular shape and single-cut American pattern teeth on the sides and edges for sharpening m...ill or circular saws, draw filing, and finishing metals. The file tapers slightly toward the point to ease access into...... read more

Nicholson
$51.52

Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, an...d electronic soldering products, including Campbell (R) chain, Crescent (R) brand wrenches and pliers, Lufkin (R)...... read more

Nicholson
$21.13

The Nicholson round hand file has single-cut American pattern teeth for filing holes and curves. The file tapers slightly toward t...he point to ease access into holes. It has single-cut American pattern teeth for finishing, sharpening, and deburring.... read more

Nicholson
$23.56

Country of Origin: Mexico File Cut: Laminate Cut Length: 10 in Long Description: 10in Plastics File Packaging: Carded Shelf Pack Q...ty.: 6 Table Description: 10in Plastics File Tooth Type: American Pattern UNSPSC_V7.0901: Files UPC: 037103243430 Weight... read more

Nicholson
$156.24

The Nicholson needle file set is an assortment of 12 files in a variety of shapes that are 6-1/4 long and have double-cut grade 0 ...Swiss pattern teeth for use in making jewelry, dies, watches, and fine tools. The Swiss pattern teeth are double-cut for... read more

Nicholson
$51.45

The Nicholson adjustable flexible file holder is size number 25 to hold 12in or 14in long flexible files for secure grip and maint...ain a curve while filing. A screw thimble provides adjustment for file size and can set the file's degree of outward or... read more

Nicholson
$105.15

The Nicholson hand file has a rectangular shape, one side with double-cut American pattern teeth, and one side with single-cut Ame...rican pattern teeth for smoothing and shaping straight surfaces. The double-cut teeth provide rapid material removal,...... read more

Nicholson
$231.95

The Nicholson flat hand file has a rectangular shape with curved standard pattern teeth on both sides for smoothing and shaping st...raight surfaces in automotive body work. It has curved-cut teeth for fast cutting action with a smooth finish on... read more

Nicholson
$9.74

ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, a...t low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap... read more

Nicholson
$26.99

ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, a...t low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap... read more

Nicholson
$9.30

ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, a...t low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap... read more

Nicholson
$17.37

ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, a...t low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex cap... read more

Nicholson
$14.13

Half Round File, American Pattern, Profile Shape Half Round, Cut Type Second, Length 6 In., Natural, Width 19/32 In., Thickness 11.../64 In., Handle Design None, Recommended Handle Mfr. No. 21524 Wood, 21474 Plastic, Use to Concave Corners, Crevices, and... read more

Nicholson
$13.44

Half Round File, American Pattern, Profile Shape Half Round, Cut Type Bastard/Double, Length 8 In., Natural, Width 2-1/2 In., Hand...le Design None, For Tool and Die Makers, Jewelers, Model Makers read more

Nicholson
$11.16

Warding File, American Pattern, Profile Shape Rectangular, Cut Type Bastard, Length 4 In., Natural, Single Cut Edges, Handle Desig...n None, Recommended Handle Mfr. No. 21522N Wood, 21474 Plastic, For Filing Ward Notches in Keys and Narrow Areas read more

Nicholson
$12.02

Warding File, American Pattern, Profile Shape Rectangular, Cut Type Smooth, Length 6 In., Natural, Single Cut Edges, Handle Design... None, Recommended Handle Mfr. No. 21524 Wood, 21474 Plastic, For Filing Ward Notches in Keys and Narrow Areas read more

Nicholson
$18.38

Mill File, American Pattern, Profile Shape Rectangular, Cut Type Bastard/Single, Length 10 In., Natural, (2) Round Single Cut Edge...s, Handle Design None, For Sharpening Mill/Circular Saw and Draw Filing/Finishing Metals read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts