Refine By

Lyon Home Improvement

Lyon
$71.46
at Zoro

Steel Coil, 301, Stainless Steel, Temper Spring Tempered, Thickness (In.) .025, Thickness (mm) 0.635, Thickness Tolerance +/.001, ....025 In. x 2 In. x 25 Ft., Width Tolerance +/.005, Length Tolerance +/1 In., Color Silver, Tensile Strength (PSI) 192,000,... read more

Lyon
$40.37
at Zoro

Steel Coil, 301, Stainless Steel, Temper Spring Tempered, Thickness (In.) .031, Thickness (mm) .787, Thickness Tolerance +/.0015, ....031 X 1/2 In. X 10 Ft., Width Tolerance +/.005, Length Tolerance +/1 In., Color Silver, Tensile Strength (PSI) 192,000,... read more

Lyon
$62.11
at Zoro

Steel Coil, 1095, Blue Tempered Spring Steel, Temper Fully Hardened, Thickness (In.) .050, Thickness (mm) 1.270, Thickness Toleran...ce +/.002, .050 In. X 123/8 In. X 3 Ft., Width Tolerance +/.010, Length Tolerance +/1 In., Color Blue, Tensile Strength... read more

Lyon
$384.34
at Amazon

Pre-engineered 84" high rivet rack heavy-duty channel beam add-on. Applications are record storage, hand loaded, light weight bulk...y items, cartoned merchandise, boltless rivet. Includes center support. Particle board decking sold separately. Construction is 14-gauge steel, steel beams and uprights. Weight capacity is 1200 lbs (per pair of beams), weight capacity based on evenly distributed load - 7000 lbs per section. read more

Lyon
$187.00
at Amazon

Pre-engineered 84" high rivet rack medium duty double-rivet, flanged beam sections and add-on sections. Construction 14-gauge stee...l. 1-1/2" centers adjustability. 600-1200 lbs (per pair of beams). Weight capacity based on evenly distributed load - 7000 lbs per section. Particle Board decking sold separately. Beams drop into slots on uprights to create a sturdy, rigid structure. Add-on uprights are 14-gauge T-posts for use as intermediate posts in multiple section rows. Easy assembly. read more

Lyon
$331.32
at Amazon

High humidity, unheated storage; storage of solvents, oily or greasy parts. Shelf Clips 12 gauge, hot rolled, one piece constructi...on. Four clips required per shelf. T-Post Uprights Patented design, formed of tough, durable hot-rolled steel affords easy shelf adjustments on 1-1/2" centers using shelf clips. 18-Gauge Traditional Flanged shelves provide up to 750 lbs capacity for electrical fittings, clamps. Add-on component type. Ideal in areas subject to high humidity or salt air, in unheated warehouses. Open Shelves high visibility is ideal for storing packaged stock, and other material without assigned shelf locations. Lapped and welded shelf corners provide added strength and durability. read more

Lyon
$347.22
at Amazon

T-post uprights patented design, formed of tough, durable hot-rolled steel affords easy shelf adjustments on 1-1/2" centers using ...shelf clips. 18 Gauge extra heavy duty with front and rear "Box W" formation. The front and rear "Box W" formation is not less than 1-11/64" by 2-7/32" by 11/8" with a 9/16" return flange spot-welded to the bottom portion of the shelf. The 2-7/32" portion of the "Box W" formation shall have a 10-degree bend in the center for additional strength and rigidity. The front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1-11/64" with a 90-degree return flange of not less than 5/8". All corners lapped and welded. All shelves punched on 3" centers for divider attachment. Shelves also punched at four corners for bolting to up-rights. The front and rear flanges of the shelf are to be embossed with 18 GA. All pre-engineered sections are 36" wide, 84" high, with shelves adjustable on 1-1/2" centers. For double row, back-to-back installations, use economical open back shelving on one side, common backs of closed shelving sections on the other side. Open shelves: high visibility is ideal for storing packaged stock, and other material without assigned shelf locations. Lapped and welded shelf corners provide added strength and durability. Starter component type. read more

Lyon
$331.05
at Amazon

One piece, top to bottom 16 guage steel door strike on all steel lockers for strength and security. Powdered-metal nano roller lat...ching system provides up to three times the break-in protection compared to existing locker latching systems. Quieting nylon glides positioned at lock bar pins hush door operations. All one-piece locker door construction from prime, highgrade class 16 guage steel for extra strength and durability. Recessed handles with finger lift offer added safety and security, clean flush mount appearance. 5 Tier lockers provide high density storage for individual belongings and supplies. Great in classrooms, laboratories, gymnasiums, sports and recreational facilities, and more. 6" legs rear legs are adjustable for leveling; 3" to 6" louvers for ventilation. read more

Lyon
$863.50
at Amazon

One piece, top to bottom 16 guage steel door strike on all steel lockers for strength and security. Powdered-metal nano roller lat...ching system provides up to three times the break-in protection compared to existing locker latching systems. Quieting nylon glides positioned at lock bar pins hush door operations. All one-piece locker door construction from prime, highgrade class 16 guage steel for extra strength and durability. Recessed handles with finger lift offer added safety and security, clean flush mount appearance. 5 Tier lockers provide high density storage for individual belongings and supplies. Great in classrooms, laboratories, gymnasiums, sports and recreational facilities, and more. 6" legs rear legs are adjustable for leveling; 3" to 6" louvers for ventilation. read more

Lyon
$331.05
at Amazon

One piece, top to bottom 16 guage steel door strike on all steel lockers for strength and security. Powdered-metal nano roller lat...ching system provides up to three times the break-in protection compared to existing locker latching systems. Quieting nylon glides positioned at lock bar pins hush door operations. All one-piece locker door construction from prime, highgrade class 16 guage steel for extra strength and durability. Recessed handles with finger lift offer added safety and security, clean flush mount appearance. 5 Tier lockers provide high density storage for individual belongings and supplies. Great in classrooms, laboratories, gymnasiums, sports and recreational facilities, and more. 6" legs rear legs are adjustable for leveling; 3" to 6" louvers for ventilation. read more

Lyon
$209.99
at Amazon

3104(DD) Stand Color: Dove Gray This sturdy unit can be used as a workstation, mounting for small tools, or work centers. Its heav...y-duty construction ensure years of use. Features: -3 storage trays -4 solid steel glide feet -Overall Dimensions: 34 1/4'' H x 20'' W x 28'' D -Available in 3 colors (Dove Gray, Putty, Wedgewood Blue) read more

Lyon
$1,519.40
at Amazon

Lyon 1115 This extra heavy-duty storage cabinets are perfect for safely storing and protecting all of your supplies and tools. The... steel doors have a padlock hasp and brass-pin hinges securely welded to each door. The 3 adjustable shelves and 3 point locking system ensure that this cabinet will be safe and effective. Features: -Heavy-duty, all-welded legs allow easy forklift entry -3 adjustable shelves -Overall Dimensions: 78" H x 36" W x 21" D Cabinet Color: Wedgewood Blue read more

Lyon
$1,588.20
at Amazon

Lyon 1120 This extra heavy-duty storage cabinet is perfect for safely storing and protecting all of your supplies and tools. The s...teel doors have a padlock hasp and brass-pin hinges securely welded to each door. The 4 adjustable shelves and 3 point locking system ensure that this cabinet will be safe and effective. Features: -Heavy-duty, all-welded legs allow easy forklift entry -4 full-width shelves adjustable on 3" centers -1450 lb load capacity on each shelf -Overall Dimensions: 82" H x 48" W x 24" D Cabinet Color: Wedgewood Blue read more

Lyon
$507.10
at Amazon

One piece, top to bottom 16 guage steel door strike on all steel lockers for strength and security. Powdered-metal nano roller lat...ching system provides up to three times the break-in protection compared to existing locker latching systems. Quieting nylon glides positioned at lock bar pins hush door operations. All one-piece locker door construction from prime, highgrade class 16 guage steel for extra strength and durability. Recessed handles with finger lift offer added safety and security, clean flush mount appearance. 5 Tier lockers provide high density storage for individual belongings and supplies. Great in classrooms, laboratories, gymnasiums, sports and recreational facilities, and more. 6" legs rear legs are adjustable for leveling; 3" to 6" louvers for ventilation. read more

Lyon
$281.49
at Amazon

One piece, top to bottom 16 guage steel door strike on all steel lockers for strength and security. Powdered-metal nano roller lat...ching system provides up to three times the break-in protection compared to existing locker latching systems. Quieting nylon glides positioned at lock bar pins hush door operations. All one-piece locker door construction from prime, highgrade class 16 guage steel for extra strength and durability. Recessed handles with finger lift offer added safety and security, clean flush mount appearance. 5 Tier lockers provide high density storage for individual belongings and supplies. Great in classrooms, laboratories, gymnasiums, sports and recreational facilities, and more. 6" legs rear legs are adjustable for leveling; 3" to 6" louvers for ventilation. read more

Lyon
$1,369.85
at Amazon

Shelves bolt into place and are adjustable on 2" centers with payload capacity of 300 lbs each. Plastic bins, impervious to most s...olvents and corrosives, clip on and off galvanized pick racks bolted to cabinet back. All cabinets are 36" wide. Shelves are included, but not installed. All bins shown with pre-engineered units are 5-7/8" wide by 11-1/8" depth by 5" height with capacity of 285 cubic inches. Visible storage cabinets are equipped to accept padlock. Set up means product ships fully assembled. Expanded metal shall be 3/4" mesh 13-gauge flattened carbon steel providing approximately 74 percent open area. Gauge and other steel parts shall be as listed below. Bolts to be zinc-plated or subjected to other comparable rust-retardant treatment. All lockers shall be pre-assembled with all seams and joints welded for rigidity and durability. Sides shall be constructed with 13-gauge expanded metal with 20-gauge steel hemming welded to all four edges, resulting in a completely smooth frame around the expanded metal. The 16-gauge flat top and bottom shall be offset to extend into frame cross members. Backs shall be 18-gauge, cold-rolled steel. Individual sloping tops shall be 20-gauge cold-rolled steel. Four shelves 16-gauge supplied loose with unit. Flanged on sides and back-channel formation on front flange attached at no less than two points through each side flange. Shelves are adjustable by use of nuts and bolts. Shelf adjustment ranges from 8-3/4" at the bottom to 8-3/4" from the top. Steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive phosphate treatment and a heavy coat of high-quality enamel. Complete locker must be finished in same color. Locking device shall consist of two 5/16" cold-drawn steel rods and 12-gauge center locking disc. Storage Deep Cabinet with 4 Shelves and 4" Base. Available in Dove Gray color. Measures 36" width by 18" depth by 72" height. read more

Lyon
$2,198.00
at Amazon

3 Heavy-duty 5/16" brass pin hinge plates welded to each door. Additional shelves are available for customized configurations. 4" ...high welded on legs. Forklift base allows for easy movement. Includes 1 full-width shelf per compartment. Set up means product ships fully assembled. Multi door cabinet. Available in Dove Gray color. Cabinet measures 48" width by 24" depth by 82" height. read more

Lyon
$1,355.15
at Amazon

Shelves bolt into place and are adjustable on 2" centers with payload capacity of 300 lbs each. Plastic bins, impervious to most s...olvents and corrosives, clip on and off galvanized pick racks bolted to cabinet back. All cabinets are 36" wide. Shelves are included, but not installed. All bins shown with pre-engineered units are 5-7/8" wide by 11-1/8" depth by 5" height with capacity of 285 cubic inches. Visible storage cabinets are equipped to accept padlock. Set up means product ships fully assembled. Expanded metal shall be 3/4" mesh 13-gauge flattened carbon steel providing approximately 74 percent open area. Gauge and other steel parts shall be as listed below. Bolts to be zinc-plated or subjected to other comparable rust-retardant treatment. All lockers shall be pre-assembled with all seams and joints welded for rigidity and durability. Sides shall be constructed with 13-gauge expanded metal with 20-gauge steel hemming welded to all four edges, resulting in a completely smooth frame around the expanded metal. The 16-gauge flat top and bottom shall be offset to extend into frame cross members. Backs shall be 18-gauge, cold-rolled steel. Individual sloping tops shall be 20-gauge cold-rolled steel. Four shelves 16-gauge supplied loose with unit. Flanged on sides and back-channel formation on front flange attached at no less than two points through each side flange. Shelves are adjustable by use of nuts and bolts. Shelf adjustment ranges from 8-3/4" at the bottom to 8-3/4" from the top. Steel parts shall be thoroughly cleaned, given a bonding and rust inhibitive phosphate treatment and a heavy coat of high-quality enamel. Complete locker must be finished in same color. Locking device shall consist of two 5/16" cold-drawn steel rods and 12-gauge center locking disc. Storage Deep Cabinet with 4 Shelves. Available in Dove Gray color. Measures 36" width by 21" depth by 72" height. read more

Lyon
$348.37
at Amazon

DD3106 Stand Color: Dove Gray Features: -3 storage trays.-1 steel drawer with removable sliding tray and padlock hasp.-Ball bearin...g rollers within drawer.-4 solid steel glide feet. Options: -Available in 3 colors (Dove Gray, Putty, Wedgewood Blue). Dimensions: -Overall Dimensions: 34 1/4'' H x 20'' W x 28'' D. read more

Lyon
$1,086.00
at Amazon

Bench top will be standard lyon tops as provided in catalog depending on application and choice of surface material, available top... includes 1-1/2" thick and pressed wood over wood. 1-7/8" Bench top thickness. Sliding doors are an optional feature, doors shall be right and left hand, sliding, each operated individually and each with a recessed handle for easy operation. Right hand door shall have a flat key lock, so operated as to lock both doors, all steel parts painted in gray or Putty will be manufacturer?s standard baked on enamel paint. The cabinet work bench with sliding doors. read more

Lyon
$563.37
at Amazon

Material shall be the best quality, cold rolled, mild annealed, sheet steel free from buckle, loose scale or other surface imperfe...ctions. All steel parts shall be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature not less than 300 degree fahrenheit and must withstand rigid hammer test without flaking. Shall be 14 gauge steel. Top and bottom horizontal leg channels to be 14 gauge spotwelded at two locations on each side of the vertical leg channels.The adjustable foot is a channel made of 14 gauge steel and out of one continuous piece. The channel is punched with 12 holes on 1" increments for adjustment purposes. The bottom of the channel is formed and punched to add a leveling foot if desired by means of nut and bolt. Overall height of channel is 12-1/2" high. The channel is inserted into the bottom of the workbench leg and secured with nuts and bolts. Adjustability is performed by loosening nuts and bolts and repositioning to desired hole location on 1" centers. Versatile adjustable legs work bench with stringer and shelf. 1-1/2" Thick pressed wood over wood top. 1-7/8" Bench top thickness. Available in Dove Gray color. Bench measures 72" width by 28" depth by 36-1/4" height. read more

Lyon
$451.33
at Amazon

Pre-engineered super comp top bench with adjustable sliding legs, shelf, stringer and perfect fit drawer. Slide bolt legs and benc...hes are not compatible with Sky-Wal II components. 1-3/4" Thick super comp comfort edge top. Perfect-fit bench drawers are 9" deep, easily accommodate aerosol cans. Lunch totes, purses, manuals, directories - and all those ot. 1-3/4" Thick super comp comfort edge top. read more

Lyon
$785.51
at Amazon

Material shall be the best quality, cold rolled, mild annealed, sheet steel free from buckle, loose scale or other surface imperfe...ctions. All steel parts shall be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature not less than 300 degree fahrenheit and must withstand rigid hammer test without flaking. Shall be 14 gauge steel. Top and bottom horizontal leg channels to be 14 gauge spotwelded at two locations on each side of the vertical leg channels.The adjustable foot is a channel made of 14 gauge steel and out of one continuous piece. The channel is punched with 12 holes on 1" increments for adjustment purposes. The bottom of the channel is formed and punched to add a leveling foot if desired by means of nut and bolt. Overall height of channel is 12-1/2" high. The channel is inserted into the bottom of the workbench leg and secured with nuts and bolts. Adjustability is performed by loosening nuts and bolts and repositioning to desired hole location on 1" centers. Versatile adjustable legs work bench with stringer. 1-1/2" Thick graphite composite top with comfort edge. read more

Lyon
$958.45
at Amazon

Built-in bolts secure legs within a 8" sliding range. Leg levelers afford easy adaption to uneven flooring for stability. 9" Adjus...tment range. Adjustable slide bolt legs work bench with stringer, perfect fit drawer and shelf. 1-3/4" Thick laminated hardwood top with comfort edge. Perfect fit drawers: perfect fit bench drawers are 9" deep, easily accommodate aerosol cans, lunch totes, purses, manuals and directories. read more

Lyon
$970.26
at Amazon

Heavy-duty steel construction stand-up desks. Tops and steel components provide years of maintenance-free use. Hasps on drawers ac...cept padlocks (not included) to secure contents. Optional key-locks for cabinets offer added security (all drawers can be keyed alike). Four-compartment riser keeps supplies and paper-work organized. Available in Putty color. Desk measures 34.625" width by 48-11/16" height by 20" depth; 41-11/16" desk top height. read more

Lyon
$983.35
at Amazon

Closed Shelves protect packages and unboxed items from dust, sunlight and other contaminants. Divide work or storage space into se...parate areas. Wire Shelves are all-welded and constructed from heavy-gauge steel wire and heavy-gauge channels. Shelf load capacity ranges from 350 lbs to 500 lbs per shelf. Shelves slip easily onto uprights using Lyon shelf clips. Capacities based on evenly distributed loads. Component type starter. read more

Lyon
$493.57
at Amazon

Material shall be the best quality, cold rolled, mild annealed, sheet steel free from buckle, loose scale or other surface imperfe...ctions. All steel parts shall be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature not less than 300 degree fahrenheit and must withstand rigid hammer test without flaking. Shall be 14 gauge steel. Top and bottom horizontal leg channels to be 14 gauge spotwelded at two locations on each side of the vertical leg channels.The adjustable foot is a channel made of 14 gauge steel and out of one continuous piece. The channel is punched with 12 holes on 1" increments for adjustment purposes. The bottom of the channel is formed and punched to add a leveling foot if desired by means of nut and bolt. Overall height of channel is 12-1/2" high. The channel is inserted into the bottom of the workbench leg and secured with nuts and bolts. Adjustability is performed by loosening nuts and bolts and repositioning to desired hole location on 1" centers. Versatile adjustable legs work bench with stringer. 1-1/2" Thick graphite composite top with comfort edge. read more

Lyon
$614.02
at Amazon

Heavy gauge steel construction. Door openings are 34-1/2" width by 24-1/4" height. Tubular steel handle aids mobility on 3-1/2" Dy...na-Tred casters (2 fixed, 2 swivel with foot brake). read more

Lyon
$484.77
at Amazon

Pressed wood over wood top bench with adjustable sliding legs and stringer. Slide bolt legs and benches are not compatible with Sk...y-Wal II components. 1-1/2" Thick pressed wood over wood top. read more

Lyon
$1,410.24
at Amazon

Storage Cabinet, Door Type Standard, Cabinet Color Gray, Welded, 14 Gauge, Overall Height 82 In., Overall Width 48 In., Overall De...pth 24 In., Material Steel, Finish Baked Enamel, Number of Shelves 4, 1450 lb. Shelf CapacityLocking System 3 Point read more

Lyon
$423.94
at Amazon

DD2474AS Bench Color: Dove Gray, Leg Type: Adjustable Sliding Legs Features: -Steel frame.-Electrical knockouts on each leg offer ...space for duplex outputs.-1 full-width shelf underneath the table surface. Dimensions: -Overall Dimensions: 34'' H x 48'' W x 28'' D. read more

Lyon
$354.15
at Amazon

<div class="aplus"><p>The Lyon DD8837 set of swinging doors includes two doors that are made of steel, are dove gray in color, and... can be used to convert a Lyon 8000 series shelving unit (sold separately) into a lockable storage cabinet. Steel is resistant to fire, wear, and corrosion. The doors swing open for interior access. Each door mounts to the shelving unit in three places for strength. The right-hand door has a chrome-plated handle that resists wear and corrosion and can be wiped clean. The handle contains a key lock to help secure contents and prevent unauthorized access. The doors together measure 36" x 84" (W x H). (W is width, the horizontal distance from left to right; H is height, the vertical distance from lowest to highest point.) They are suitable for use with a Lyon 8000 series shelving unit measuring 36" x 84" (W x H).</p><p>Standing shelf units are commonly used to store items to help create organized, efficient, and safer work areas. These systems typically consist of a frame or rack with open shelves. Added components such as casters, wheels, or handles are used for applications that require mobility. Standing shelf units are used in a variety of office, industrial, educational, and residential settings.</p><p>Lyon Industries manufactures shim stock and thin gauge metals. The company, founded in 1968, is headquartered in South Ensign, IL.</p></div> read more

Lyon
$922.41
at Amazon

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. F...inish all sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. The right hand door shall be equipped with a 3-point locking mechanism that engages slots provided in top and bottom cross channels and in left hand door. The locking mechanism consists of the following parts. Locking bars is 18-gauge steel, channel shaped, operating within 18 gauge steel lock bar guides spot welded to top and bottom edge of door, and riveted to locking disc at center of door. Locking disc is 14-gauge steel, punched for attachment of flocking bars and operating handle and flanged approximately 3/8" for lock strike. Locking disc to have extended hooked fingers which engage left hand door when locking disc is in locked position. The right hand door only shall be equipped with a die cast, chrome plated and polished turn handle, which attaches to and operates the locking disc. The right hand door shall also be equipped with a cylinder type lock that engages the strike flanges on the locking disk. Available in Black color. Cabinet measures 48" width by 24" depth by 78" height. 2000 lbs capacity. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping