LCN LCN 1460 Medium Duty Door Closer, Dark Bronze Powder Coat Finished, Cast Iron, Non-Handed, Regular Arm with Parallel Arm Shoe

The LCN 1460 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is... made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.

Specifications
CylinderCast iron with forged steel piston
Arm constructionForged steel main arm, stamped steel forearm
CoverPlastic
MountingHinge (pull) side, top jamb (push), or parallel arm
Interior door width24" to 60"
Exterior door width24" to 48"
Maximum door opening180 degrees
ANSI/BHMA gradeGrade 1
Cycles1.5 million
UL compliance3-hour fire rating, UL 10C

Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile.

LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.

What's in the Box?

  • 1460 series hydraulic cylinder
  • Standard double lever arm
  • Parallel arm shoe
  • Plastic cylinder cover
  • Peel-n-stick installation template
  • Fastener pack: thru-bolt with self-reaming and tapping screws
read more

LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston. double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$235.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$325.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm with a built-in stop, includes a parallel arm shoe, has a da...rk bronze powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm has a built-in stop that limits door sweep to 110 degrees to protect adjacent walls. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Cush-n-stop double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$411.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever, forged steel arm, has an aluminum powder coated finish, and is ...for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm is made of forged steel for high traffic settings, and can be installed for a regular or a top-of-jamb mount. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Extra duty double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$279.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$212.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$212.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$367.00
at Amazon

<div class="aplus"><p>The LCN 4010 door closer has a right-handed, double lever arm, an aluminum powder coated finish, and is for ...use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular mount. The door closer is right-handed for installation on doors with hinges on the right side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>140 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4010 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$279.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
Schlage
$277.60
at Amazon

Keypad Entry with Flex Lock with Accent Lever from the Camelot Collection Flexibility to choose; switch from automatic relocking t...o unlocked as needed Provides additional layers of keyless security and protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") read more

Schlage
$277.60
at Amazon

Keypad Entry with Flex Lock with Accent Lever from the Camelot Collection Flexibility to choose; switch from automatic relocking t...o unlocked as needed Provides additional layers of keyless security and protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") read more

Schlage
$251.70
at Amazon

Keypad Entry with Flex Lock with Accent Lever from the Camelot Collection Flexibility to choose; switch from automatic relocking t...o unlocked as needed Provides additional layers of keyless security and protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") read more

Schlage
$277.60
at Amazon

Keypad Entry with Flex Lock with Accent Lever from the Camelot Collection Flexibility to choose; switch from automatic relocking t...o unlocked as needed Provides additional layers of keyless security and protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") read more

Schlage
$249.70
at Amazon

Schlage FE595 PLY 626 ELA Plymouth Design Keypad Entry with Elan Levers, Satin ChromeWhen you install Schlage products, you know y...our home is secure. After all, we're the leader in security devices, trusted for more than 85 years. When you safeguard your home and family with Schlage, you ensure your security as well as your peace of mind. Our legendary quality and reliability let you put your worries aside and focus on other things. The timeless design of the Plymouth works with any style in any room of your home.Since 1927, Schlage Lock Company has been committed to building the highest quality, most secure, best valued locks in the industry. Using the finest materials, every Schlage lockset is precision built to meet and exceed industry standards. That means superior performance and longer life. Schlage residential products are backed by a Lifetime Limited Mechanical Warranty. Other Schlage brands include Schlage Accents, Ives, and Kryptonite.Schlage FE595 PLY 626 ELA Plymouth Design Keypad Entry with Elan Levers, Satin Chrome Features: Flexibilty to choose; switch from automatic relocking to unlocked as needed Provides additional layers of keyless security & protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most exisiting deadbolts with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. No more house keys to hide, lose, carry or forget! Add & delete user codes in seconds Pre-programmed and easy to install Surpasses ANSI Grade 2 standards to provide maximum security read more

LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston. double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
iTouchless
$349.99
at Amazon

With the fingerprint recognition technology, you can easily give your children or other family members access to your home without... needing to worry about them losing the keys. Uses the latest biometric entrance technology with 150 fingerprints storage capacity for deadbolt model. This lock can be configured for Right swing doors. Can replace any standard door locks. This fingerprint door lock offers a sliding front cover that not only allows protection for the optical sensor but also activates the fingerprint scanner when lifted and it can be accessed by fingerprint, passcode, or backup key. Powered by 4 AA batteries which will handle 15,000 usages. read more

iTouchless
$319.95
at Amazon

With fingerprint recognition technology, you can easily give your children or other family members access to your home without nee...ding to worry about them losing the keys. Uses the latest biometric entrance technology with 150 fingerprint storage capacity for single latch tubular model. Replaces any standard door lock. Fingerprint door lock offers a sliding front cover that not only allows protection for the optical sensor but also activates the fingerprint scanner when lifted and it can be accessed by fingerprint, passcode, or backup key. Powered by 4 AA batteries which will handle 15,000 usages. read more

DON-JO
$286.40
at Amazon

Don-Jo heavy duty surface door stop. Satin stainless steel finish. Non handed overhead stop. For exterior, vestibule or interior d...oors, single acting. Limited 1-year warranty. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping