LCN LCN 1260 Medium Duty Door Closer, Aluminum Powder Coat Finished, Cast Iron, Non-Handed, Regular Arm with Parallel Arm Shoe

The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is m...ade of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.

Specifications
CylinderCast iron with forged steel piston
Arm constructionForged steel main arm, stamped steel forearm
CoverPlastic
MountingHinge (pull) side, top jamb (push), or parallel arm
Interior door width26" to 54"
Exterior door width26" to 42"
Maximum door opening180 degrees
ANSI/BHMA gradeGrade 1
Cycles1.5 million
UL compliance3-hour fire rating, UL 10C

Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile.

LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.

What's in the Box?

  • 1260 series hydraulic cylinder
  • Standard double lever arm
  • Parallel arm shoe
  • Plastic cylinder cover
  • Peel-n-stick installation template
  • Fastener pack: thru-bolt with self-reaming and tapping screws
read more

LCN
$212.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$235.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$235.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has an aluminum po...wder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$325.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm with a built-in stop, includes a parallel arm shoe, has an a...luminum powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm has a built-in stop that limits door sweep to 110 degrees to protect adjacent walls. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Cush-n-stop double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$302.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
Copper Creek
$116.70
at Amazon

Copper Creek P-Series front door handlesets provide excellent value. These Solid Brass Handlesets are manufactured to the highest ...standards using the finest materials available. They are time tested to meet the toughest national building codes for new construction. Standard cross bore hole spacing is 5-1/2-Inch . This Handleset is standard replacement for most residential construction and meets ANSI/BHMA - These handlesets are sold with an interior assembly. All interior assemblies feature a full 1-Inch throw deadbolt, an ADA turn piece, and rich finish to match. - P-Series handlesets carry a limited lifetime mechanical warranty and 10 year finish warranty. read more

Schlage
$29.10-$31.50
at Amazon

Schlage F170-LAT-CEN Single Dummy Latitude Door Lever with the Decorative Century Rose For over 90 years, Schlage has been making ...homes more stylish and secure with the best door locks and door hardware. Today the Schlage family of products also includes the very best in electronic locks, keyless door locks, and home security. Let Schlage's hardware and security solutions protect and enhance the things that matter most to you. The clean lines of the contemporary Latitude lever help you make a bold impression. A Single Dummy Door knob is for use as a door pull or decorative trim on French or pantry doors. This single dummy knob includes one knob (for one side of the door), one decorative rosette and the required mounting screws. This is a SINGLE Dummy trim for one side of the door. To dress two sides of a door with dummy hardware, you simply order quantity 2 of these and install on each side of the door. Used for door pull or as matching inactive trim. Screws are NOT concealed on the Single Dummy trim Lifetime Mechanical and Finish Warranty (Finish warranty does not include Oil Rubbed Bronze because it is a living finish and will patina over time) Solid zinc die-cast rose construction (Excluding the Andover Rose which is a stamped metal construction) read more

Slide-Co
$42.99
at Amazon

Slide-Co 143598 Sliding Patio Door Handle Set includes one inside pull with thumb latch, one outside pull and installation fastene...rs, die cast inside pull with wood handle, die cast thumb turn and steel latch activator, die cast outside pull. Fits mortise lock systems. Screw holes 3-15/16? apart. read more

Baldwin
$165.00
at Amazon

5255.003.RENT Finish: Lifetime Polished Brass Features: -Keyed entry lever.-With right handling.-Full lip strike plate.-6 Pin cyli...nder.-Emergency exit function always retracts latch for immediate exit.-Lever latches use heavy duty springs.-Use lever latch for lever knob and lever.-Requires door thickness 1.38'' - 1.75''.-Lever has adjustable latch for 2.38'' and 2.75'' backsets.-Accessibility code (ADA) A117.1.-Certified by Underwriters Laboratories (UL) for use on fire doors up to three-hour rating.-U L10C / UBC 7-2 (1997) Positive Pressure Rated, UL10B Pressure Rated.-cUL certified. Includes: -Emergency release key included with privacy latch. Construction: -Solid forged brass construction. Dimensions: -Fits standard 2.13'' door prep.-Dimensions: 2.62'' H x 2.74'' D. Collection: -Wave collection. read more

Lillian Rose
$6.50
at Amazon

Lillian Rose 3.5" Satin Do Not Disturb Door Hanger. Measuring 3.5" x 3.25" and made of satin, these soft door hanger pillows inclu...de a black satin ribbon for hanging.  Both are shaped like hearts.  One heart is embroidered with a pair of rings and the words "Just Married." The other heart is embroidered with the words "Do Not Disturb.". read more

Master Lock
$30.36
at Amazon

Master Lock SLL0315 satin nickel finish straight lever style privacy door lock. Six way adjustable latch fits all doors, 2-3/8-inc...h or 2-3/4-inch backset, square, rounded corners or drive in.The SilvaBond antimicrobial protected finish has proved to be very effective in controlling bacteria, mold and mildew on surfaces. Independent laboratory testing has confirmed the effectiveness of this long lasting and durable finish. read more

Mommy's Helper
$1.79
at Amazon

Deter curious children from entering rooms or closets that might contain a danger. The Door Knob Cover will simply spin loosely ar...ound the door knob when a child tries to turn it. But by squeezing the two grab tab buttons, the door knob turns easily. The oversized grip design makes it hard for youngsters to get their hands around the knob, yet is easy for adults to grip and squeeze to open the door. Lock cover tab protects against accidental lock outs by covering the door knob lock. Un snap the cover tab to access the lock. read more

Copper Creek
$22.85
at Amazon

Copper Creek E-Series door knobs provide excellent value. These locksets are manufactured to the highest standards using the fines...t materials available. They are time tested to meet the toughest national building codes for new construction. These door knobs feature solid brass cylinders (when keyed), round corner adjustable latches that fit most doors, nickel plated bolts, screw alignment adapters for easy installation, decorative rosettes, and a rich finish. E-Series Knobs are standard replacement for most residential construction and meets ANSI/BHMA Grade-3. P-Series Knobs carry a limited lifetime mechanical warranty and 10 year finish warranty. read more

Stanley Hardware
$17.59
at Amazon

Replacement kit for Stanley and National pocket doors. Includes 2 mounting plates, 1 wrench, 2 guides, 1 bumper, 2 floor brackets ...and 2 wall brackets. Includes all necessary nails and screws for assembly. Includes instructions. Steel material. read more

Michael Healy Designs
$145.00
at Amazon

The Pinecone Door Knocker can be used to lend a stylish accent to your door while providing a functional knocker. This door knocke...r is crafted from solid brass. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping