Klein Tools Klein Tools 630-5/16 5/16-Inch Cushion-Grip Nut Driver with 3-Inch Hollow Shank

Product Features: Hex head drives nut and socket screws Handle-end color-coded for size identification

Klein Tools
$16.95 $25.99
at Sears.com

Features and Benefits:Urethane-covered, high strength belting attached to lightweight, I-beam handle with patented cam-action desi...gn permits uniform, high-torque applicationUnder normal conditions, will not scratch, damage or deform polished pipe and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit, and polished shaftsAlso works on alternator belts, flywheels, and propeller assemblies read more

Klein Tools
$24.44 $36.99
at Sears.com

Features and Benefits:Urethane-covered, high strength belting attached to lightweight, I-beam handle with patented cam-action desi...gn permits uniform, high-torque applicationUnder normal conditions, will not scratch, damage or deform polished pipe and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit, and polished shaftsAlso works on alternator belts, flywheels, and propeller assemblies read more

Klein Tools
$24.04 $32.99
at Sears.com

Features and Benefits: Crimps insulated and non insulated terminals, lugs and splices.? Cuts & strips wires, cuts bolts & crimps i...gnition terminals. 2 wire cutters - 1 at tip and the other halfway back near stripping holes - double the utility of this tool read more

Klein Tools
$30.99 $43.99
at Sears.com

Features and Benefits: Narrow jaw and hinge for delicate work in tight areas Sharp pointed-nose for precise tip cutting Spring-loa...ded action for self-opening Hot-riveted joint ensures smooth action and no handle wobble Induction hardened cutting knives for long life.These pliers feature a unique handle tempering that helps absorb the snap when cutting wire. Made of Custom, US-made tool steel. read more

Klein Tools
$282.00
at Grainger

Bolt Cutter, Center Cutter, Length (in.) 36, Jaw Type Alloy Tool Steel, Handle Material Steel, Handle Type Heavy Vinyl Grips W/fla...t Grip Ends For 90 Degrees Cuts, 3 Point Toggle Joints, Application All-purpose, For Soft, Medium, And Hard Metals, Features Lockplate Reinforcement Prevents Jaw Bolts From Loosening Or Turning read more

Klein Tools
$372.50
at Grainger

Bolt Cutter, Heavy-duty, Length 30 In, Med/hard-brinnell 300/rockwell C31 Max Dia 1/2 In, Med/hard-brinnell 300/rockwell C31 Max D...ia 13 Mm, Soft & Med/hard-brinnell 300/rockwell C31 13 Mm, Soft & Med/hard-brinnell 300/rockwell C31 1/2 In, Compression Cut Jaw Type, Vinyl, Heavy, Bolt Cutters, Features Lever Design Creates 4,000 Lbs. Jaw Pressure With 50 Lbs. Hand Pressure read more

Klein Tools
$213.25
at Grainger

Double Face Sledge Hammer, Head Material Brass, Head Weight 4 Lb., Overall Length 16 In., Handle Material Fiberglass And Rubber, H...andle Design Nonslip Grip, Face Diameter 1-5/8 In., Head Width 1-3/4 In., Head Length 4-1/4 In., Head Color Natural, Handle Color Black read more

Klein Tools

Adjustable Wrench, Jaw Capacity 1-1/8 In., Overall Length 8-3/8 In., Material Alloy Steel, Full Polish Chrome Finish, Plastic Dipp...ed Handle, Features Forged Heat-treated Alloy Steel For Maximum Strength And Light Weight read more

Klein Tools
$419.25
at Grainger

Bolt Cutter, Heavy-duty, Length 36 In, Med/hard-brinnell 300/rockwell C31 Max Dia 9/16 In, Med/hard-brinnell 300/rockwell C31 Max ...Dia 14 Mm, Soft & Med/hard-brinnell 300/rockwell C31 14 Mm, Soft & Med/hard-brinnell 300/rockwell C31 9/16 In, Compression Cut Jaw Type, Vinyl, Heavy, Bolt Cutters, Features Lever Design Creates 4,000 Lbs. Jaw Pressure With 50 Lbs. Hand Pressure read more

Klein Tools
$326.00
at Grainger

Cable Cutter, Shear Cut, Overall Length 10 In., Cutting Capacity Copper 400 Mcm, Cutting Capacity Communication Cable 1-1/8 In., H...andle Design Steel, Features Ratchet Action Holds Cable Tight And Allows Straight Cuts, Standards -, Includes - read more

Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Makita
$1,678.00
at Amazon

Makita's 14-Inch 73cc Industrial Power Cutter has a five stage filtration system with advanced directional air flow which provides... very clean air for better saw performance. It has cushioned operator grips with 4 vibration-absorbtion rubber buffers for increased operator comfort. The water kit assembled to saw can be used with garden hose, gravity feed tank or pressure tank. A micro chip-controlled carburetor is designed to compensate engine timing according to work load. read more

Husqvarna
$1,599.00
at Amazon

968388404 Features: -Husqvarna K3000 Electric Cut-N-Break Saw.-An excellent choice for flush cutting, i.e. cutting tight against w...alls and floors.-Well suited for indoor use and smaller jobs where you want to avoid overcutting at the corners.-Ideal for cutting pipes in trenches, grooves for cabling, expansion joints and for crack renovation.-Specially developed, twin 9'' Blade provide high cutting speed and power.-The ergonomic front handle facilitates both vertical and horizontal cutting.-The convenient, patented design of the rear handle makes operation easier.-Adjustable Blade Capacity enables flush cutting.-Elgar , the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.-Electronic Soft start provides starting with normal, slow-acting fuses.-Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.-Blade Diameter: 9''.-Max RPM (no load): 4500.-Weight (include cable and Blade): 21.8 lbs. Specifications: -Motor: Electric 120 V.-Rated output: 20 amp.-Power: 2.7 HP. Dimensions: -Efficient electric cutter with convenient method for cutting up to 16'' deep.-The Cut-n-Break method allows 16'' deep cuts at a very low tooling cost. read more

Panasonic
$584.99
at Amazon

Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more

Makita
$1,330.00
at Amazon

This burly hammer has a powerful 11 Amp motor and spline drive system to power through the toughest jobs. Switches from rotary ham...mer to hammer-only mode. Air cushion design enables hard-hitting, fast drilling. Hammering Modes Hammering only, hammering w/rotation, Blows Per Minute BPM 2,100, Case Included Yes, Amps 11, Rated RPM 260, Cordless No. 11 Amp motor 260 RPM 2100 blows per minute Rotary Hammering and Hammering-Only modes Spline-type drive system for maximum power All ball and needle bearings for long tool life Large comfortable grip swivels 360 for easy handling Automatic brush cut-out system Air cushion design for hard hitting and fast drilling Torque limiter clutch for smoother operation Factory grease packed for reduced maintenance Includes straight handle, D-handle, depth gauge, bit grease and plastic tool case Model HR5000C read more

Williams
$277.02
at Amazon

All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for gre...ater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry read more

Malco
$363.00
at Amazon

<b>Put away the saw!</b><p> The <b>Malco SRC24A Channel Shear</b> is a compound leverage Channel Shear that quickly and efficientl...y cuts through 20 gauge metal studs. <p>The 36 inch handle gives you the leverage to easily cut through the stud in one easy stroke without deforming the metal around the cut.<p>The die assembly surrounds the channel ensuring a clean and precise cut where you need it most. Unlike saw cuts, the resulting edges do not require additional finishing <p>Features: <ul><li>All Steel Construction for long, dependable service life</li><li>Steel Die Assembly ensures precise, clean cut edges</li><li>Ergonomic handle uses compound leverage for almost effortless cutting action in one easy stroke</li><li>Lightweight and portable to take it where you need the cutting done</li></ul> read more

Stanley Proto
$351.12
at Amazon

Stanley J6014C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley Proto
$268.21
at Amazon

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise directio...n (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

Greenlee
$3,640.00
at Amazon

332-ESG45L11 Features: -The ram automatically retracts after the cut is complete to ready the tool for the next cut.-The two-speed... pump advances the ram rapidly to start the cut reducing cycle time.-Cutting head rotates 360 for making cuts in tight locations, and flips open to make mid-span cuts easy.-Cutting Cap.: 5/8 in [Max].-Batt. Cap.: 2.000 A-h.-Batt. Type: NiCad.-Charging Time: 1 h.-Control Type: Trigger, On/Off.-Handle Type: Centered Pistol Grip.-Applications: Cables, ACSR & Guy Wires.-Price is for 1 Each. Includes: -Includes: 120V Charger, (2) Batteries, Steel Carrying Case. Specifications: -Voltage: 12.00 VDC. Dimensions: -Height: 12 1/2 in.-Length: 15 1/2 in. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping