Refine By
KD Tools
$92.34
at Sears

Get the job done even faster with reversible ratcheting combination wrenches. Change direction with the flip of a lever without ha...ving to remove the wrench from the fastener. Set includes sizes 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" read more

KD Tools
$171.13
at Sears

Micrometer Torque Wrench with 1/4 in. Ratchet drive allows precise tightening of fasteners to manufacturers' specifications. Setti...ng adjusts easily by rotating the hand grip. Wrench indicates desired torque by feel and sound and is accurate to +/- 3% clockwise in the upper 80% range. read more

KD Tools
$69.45
at Sears

Includes the following range of 6 Pt. Metric Flex Sockets: 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM and 19MM. Sockets ...are full polished nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull sockets off ratchets. Entry angle guides fastener. Includes blow molded case for ease of storage, organization and transporting. read more

KD Tools
$5.15
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

KD Tools
$14.90
at Walmart

Features and Benefits Patented slide rail feature allows for easy positioning of sockets Internal slide eliminates interference B...all bearing retention on drive tang keeps sockets secure Includes 13 rail clips with room to add on Available in red, blue, or green for hi viz differentiation of your SAE, Metric, and Torx sockets read more

KD Tools
$15.19
at Walmart

Features and Benefits Patented slide rail feature allows for easy positioning of sockets Internal slide eliminates interference B...all bearing retention on drive tang keeps sockets secure Includes 14 rails clips with the ability to add on as needed Available in red, blue, or green for hi viz differentiation of your SAE, Metric, and Torx sockets read more

KD Tools
$427.00
at Walmart

Features and Benefits: Innovative Trigger Lock drawer system allows drawers to naturally open and close Heavy gauge steel provide...s strength and durability Durable powder coating with additional full polished lacquer coating Double Ball Bearing construction offers exceptional  load capacity and easy slide action 5 X 2 heavy duty locking casters for easy maneuvering read more

KD Tools
$8.47 $14.65
at Walmart

Features and Benefits Patented slide rail feature allows for easy positioning of sockets Internal slide eliminates interference B...all bearing retention on drive tang keeps sockets secure Stores up to 13 sockets Available in red, blue, or green for hi viz differentiation of your SAE, Metric, and Torx sockets read more

KD Tools
$716.07 $874.99
at Walmart

Features and Benefits: Innovative Trigger Lock drawer system allows drawers to naturally open and close Heavy duty steel gauge fo...r required strength and durability Durable powder coating with additional full polished lacquer coating Double Ball Bearing construction offers exceptional load capacity and easy slide action 5 X 2 heavy duty locking casters for easy maneuvering read more

KD Tools
$12.07
at Walmart

Features and Benefits Magnetic inside surface for securing of metal objects Adjustable to secure items in horizontal or vertical ...positions Magnet coated with rubber sleeve for surface protection Great for mounting on tool boxes 1 Piece Universal Magnetic Parts Tray packaged on a card read more

KD Tools
$13.56
at Sears

A 14 in.-long hose incorporates special 14 and 18mm stepped fitting with O-ring seals for universal fit and 1/4 in. NPT fitting fo...r easy connection to air lines.Used with Valve Spring Compressors 912, 2078, 3087 and 3271, long hose is ideal for reaching deep set spark plug holes. read more

KD Tools
$21.21
at Sears

Removes truck oil filters from 4-21/32 to 5-5/32 in (118 to 130mm) in diameter. Designed for high torque requirements of truck fil...ters and used with 1/2 in. square drive tools. Wrench is designed for the high torque requirements of truck filters and used with a 1/2 in. square drive tool. Has a 1-1/2 in. wide band for added strength and increased grip area. read more

KD Tools
$145.02
at Sears

Pliers designed for removal and installation of internal or external snap rings. Versatile tip sizes include straight, 45 degree a...nd 90 degree angle configurations. read more

KD Tools
$13.49
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

KD Tools
$7.99
at Sears

Includes 5 pairs of color-coded precision-group tips: 0.038 in. red tips, 0.038 in. yellow tips, 0.047 in. green tips, 0.047 in. g...reen 90 degree tips, and 0.070 copper tips. read more

KD Tools
$19.99
at Sears

Removes truck oil filters from 5-5/32 to 5-21/32 in. (130 to 143mm) in diameter. Designed for high torque requirements of truck fi...lters and used with 1/2 in. square drive tools. Wrench is designed for the high torque requirements of truck filters and used with a 1/2 in. square drive tool. Has a 1-1/2 in. wide band for added strength and increased grip area. read more

KD Tools
$50.50
at Sears

Removes and installs inner tie rods on many GM and some Chrysler products that have a complete hex with a ball socket or just 2 fl...ats on the inner end that measure 1-7/16 in. across. Can also be used on all inner tie rods with 1-3/16 and 1-5/16 in. hex sizes. read more

KD Tools
$1.99
at Sears

Gauge measures spark plug electrode gaps from .025 to .045 in. (.635 to 1.143mm). Wire sizes are in inches (.025, .030, .034, .035..., .040, and .045) and millimeters (.635, .762, .864, .889, 1.016 and 1.143) Includes 2 electrode adjusting tools. read more

KD Tools
$35.34
at Sears

Includes the following phillips screwdrivers: #0 x 2-1/2 , #1 x 3", #2 x 4" with Hex Bolster, #2 x 8" and #3 x 6" with Hex Bolster... read more

KD Tools
$9.15
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

KD Tools
$63.65
at Sears

Includes the following 6 Pt. SAE Flex Sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4". Sockets are full polished nickel c...hrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull sockets off ratchets. Entry angle guides fastener. Includes blow molded case for storing, organizing and transporting tools. ... read more

KD Tools
$127.88
at Sears

All 12 Pt. 3/8" Drive set includes SAE sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1" (Standard...) and 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8" ( Deep); Metric sizes 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM and 19MM (Standard and Deep). Two extension bars (3" and 6") a universal joint, stubby full polish teardrop ratchet and full polish teardrop ratchet. Sockets are full polished nickel chrome plated. Large read more

KD Tools
$22.71
at Sears

Short beam design gives you great access in compact work areas. Box end flexes 180 degrees at multiple intervals allowing you to a...pproach a fastener from any angle. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will send you a free replacement of the same or similar item. For more warranty information call toll free 1-800-688-8949. read more

KD Tools
$18.91
at Sears

Use puller to remove the battery terminal clamp without damaging the battery post. Puller will even work on corroded spring-type c...lamps. To use, loosen the clamp bolt, place jaws under each side of the battery cable clamp and tighten the center screw until the clamp is free. read more

KD Tools
$18.91
at Sears

20 percent longer and 25 percent stronger than standard combination wrenches. Oval shaped beam for improved comfort. Box end stren...gth improved by nearly 20 percent. 5 degree ratcheting arc vs. 30 degree on standard combination wrenches. SurfaceDrive® design nearly eliminates fastener rounding. read more

KD Tools
$12.03
at Sears

Long pattern provides access to hard to reach fasteners as well as additional leverage. Open end provides stronger grip on fastene...rs, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size stamped on both sides and head of wrench. read more

KD Tools
$7.19
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

KD Tools
$8.09
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

KD Tools
$107.99
at Sears

Tool compresses automatic-transmission clutch springs on some GM, Ford, Toyota and other transmissions. Permits easy removal and i...nstallation of snap rings. read more

KD Tools
$18.05
at Sears

Easily loosen and tighten nuts on battery terminal clamps. The handles are offset for working in cramped areas and serrated jaws a...re designed for a firm grip. read more

KD Tools
$26.65
at Sears

Bends 3/16, 1/4, 5/16 and 3/8" copper and steel tubing.Makes tight bends without the tube collapsing.

KD Tools
$14.99
at Sears

Tool cuts tubing, copper, brass, aluminum and thin wall conduit. Features a 1/8 to 1-1/8 in. capacity and has a reamer blade to cl...ean off and smooth any sharp edges. Both the cutter wheels and reamer are made of hardened alloy steel. read more

KD Tools
$33.00
at Sears

Cuts pipes 3/4 to 3 in. (19 to 76mm) in diameter. Fifteen blades effectively cut pipe, so only 1/4 turn is needed to complete cut.... Works in hard-to-reach areas. Will not cut double-wall pipes. Keep well oiled. Not for use on stainless steel. read more

KD Tools
$14.99
at Sears

Restore external threads by filing. Overlap several good threads with file and file damaged ones. Files both right and left-hand t...hreads. Pitch sizes 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm read more

KD Tools
$9.45
at Sears

25-blade gauge measures clearances from 0.04 to 1mm. Blade sizes:0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30,... 0.35,0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 and 1mm. Blade Lengths: 3 in. long read more

KD Tools
$27.24
at Sears

Flares, shapes and expands tailpipes to ensure a tight fit and prevent exhaust leaks. Handle turns to adjust the expander to the d...iameter of the pipe. read more

KD Tools
$7.75
at Sears

Carry top-termil batteries with this strong, plastic strap. The ends are marked and sized to accurately fit positive and negative ...termils. The strap is not harmed by battery acid. Length 14 in. read more

KD Tools
$4.29
at Sears

For use with GearWrench Pass-Thru Ratchet and Socket System. Socket is broached for use with conventional square drive ratchets.

KD Tools
$14.61
at Sears

20 percent longer and 25 percent stronger than standard combination wrenches. Oval shaped beam for improved comfort. Box end stren...gth improved by nearly 20 percent. 5 degree ratcheting arc vs. 30 degree on standard combination wrenches. SurfaceDrive® design nearly eliminates fastener rounding. read more

KD Tools
$7.73
at Sears

Includes 5 pairs of color-coded precision-group tips: 0.024 in. red tips, 0.038 in. yellow tips, 0.038 yellow 90 degree tips, 0.04...7 in. green tips, and 0.047 in. green 90 degree tips. read more

KD Tools
$35.10
at Sears

Specially designed low profile sockets for the removal of oil filter canisters and covers. Includes the following oil filter cap w...renches: 27mm (VW), 32mm (GM, Saturn) 36mm (Volvo, VW, Ford Trucks). Packaged in plastic storage case. read more

KD Tools
$19.87
at Sears

Short beam design gives you great access in compact work areas. Box end flexes 180 degrees at multiple intervals allowing you to a...pproach a fastener from any angle. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will send you a free replacement of the same or similar item. For more warranty information call toll free 1-800-688-8949. read more

KD Tools
$29.23
at Sears

Able to free frozen bolts and screws by twisting tool in the direction of the rotation and holding while striking with a hammer. R...everse action to tighten bolts. read more

KD Tools
$10.33
at Sears

Use wrench for most GM side terminal batteries or any 5/16 in. battery terminal bolts. It has an insulated handle to reduce risk o...f electrical shock and reversible 5/16 in. ratcheting box wrench. Tool is nickel plated for durability and corrosion resistance. read more

KD Tools
$18.91
at Sears

Eliminates the need to drain cooling system when servicing. Pliers squeeze hoses shut and jaws swivel for parallel clamping.

KD Tools
$14.39
at Sears

Restore external threads by filing. Overlap several good threads with file and file damaged ones. Files both right and left-hand t...hreads. Pitch sizes 11,12, 13, 14, 16, 18, 20, 24 read more

KD Tools
$42.74
at Sears

Features and Benefits: Socket set features sockets that integrate directly into the ratchet head Vortex sockets integrate into the... GearRatchet® handle instead of attaching to a square drive eliminates the need for most deep well sockets Includes adapter that will fit standard sockets 5 degree ratcheting arc vs. 12" on standard conventional ratchets Up to 50% thinner than conventional ratcheting systems Pass-thru® ratchet and socket system eliminates the need for deep sockets. Up to 40% stronger eliminating drive tang. Includes sizes: 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 5/32", 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 3.5mm, 4.5mm, 4.5mm. Also includes 3' extension bar and 1/4" drive handle. read more

KD Tools
$55.81
at Sears

Easily converts for either extra large external or internal use on snap rings. Unique push-button feature allows effortless change.... Tool comes with heavy-duty cushion grip handles to provide comfort and broached jaws for tip control and stability. read more

KD Tools
$31.95 $50.00
at Wayfair

Features and Benefits: Features: Works in channels not accessible to other tools Chisel rotates 360 degrees to line up parallel to... bolt Frame is made of rugged drop-forged Not for use on heat-treated nuts Universal 7/16'''' to 3/4'''' Nut Cracker Lifetime warranty does not cover abuse Show Additional Info Special Offer: 12 Issues of All You Magazine Included with your purchase - a $20 value (Subscription and Rebate Info) read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping