Johnson Level Johnson Level 40-6226 Accessory Aperture Pack Dot Laser, Gold

40-6226 Dimensions: -Overall Length - Side to Side:4.25 -Overall Height - Top to Bottom:3.25 -Overall Depth - Front to Back:3.75 -Overall Product Weight:0.21

Johnson Level
$889.19
at Zoro

Electronic Self-Leveling Horizontal Rotary Laser System Designed for outdoor use and simple set up Electronic self-leveling in the... horizontal plane Electronically-controlled dual slope feature Visual and audible alarms when beyond leveling range Single speed rotation 700 RPM Slope operation function allows user to perform slope 8 degrees in both x and y axis Height of instrument (HI) alarm function ensures product accuracy 40-6536 Includes > Laser, detector with clamp and 9V battery, multi-function mount, NiMH rechargeable battery pack, alkaline battery comparent (batteries not included), charger, remote control with 9V battery, tinted glasses, magnetic target, instruction manual with warranty card and a hard-shell carrying case read more

Johnson Level
$1,957.04
at Zoro

Green MSHA Mining Alignment Laser Intrinsically safe and MSHA approved (Mining, Safety & Health Administration) - explosion proof ...containment not required Used in above ground and underground operations - extremely rugged with 14mm optics for a small dot at a distance Green beam is 4 times more visible than red and laser beam is aligned to be concentric with the outside diameter of the brass housing. This allows the installer to use the outside of the case for centering and positioning the beam. Precision beam alignment - self-cleaning threads - no tools required Milled Flat on bottom - use as an installation laser level Large 14mm optics - 20 times brighter than standard lasers O ring seal - water and oil proof to IP67 standards and solid brass - proven to work in hard environments 40-6266 Includes > Laser, adjustable spad hanging tabs, 2 AAA alkaline batteries and an instruction manual read more

Johnson Level
$14.85
at Zoro

Combination Square, Number of Pieces 2, Head Type Protractor, Graduation Type Inches, mm, Graduations 1/8 In., 1/16 In., 1/32 In.,... mm, Head Material Cast Zinc, Black Finish, Blade Material Stainless Steel, Brushed Blade Finish, Features Permanently Etched, Machined Square Reversible Head, Lock Bolt and Steel Screw, Hardened, Screw-In Scriber, Acrylic Vial read more

Johnson Level
$1,650.40
at Zoro

The Johnson Level Green MSHA Mining Alignment Laser Long Range- 40-6260 can be used for mining companies. It can also be used in h...azardous environments, saw mills, CNC machines to align bar feeders, industrial plants, marine work, R&D labs, and more. read more

Johnson Level
$79.86
at Zoro

Easy as 1-2-3: Turn on - press measure button - record measurement• Efficient one person measurements• Compact size fi...ts easily in tool belt or pocket• High speed micro processor calculates quickly• Ideal for material and project estimating/bidding• Accurate to +1/16/100'• 40-6006 Includes > 2 AAA alkaline batteries, soft-sided pouch & safety strap, instruction manual with warranty card read more

Johnson Level
$387.45
at Zoro

Self-Leveling 360 Degree Line Laser with 4 Horizontal Dots Locking mechanism protects inner pendulum during transportation Manual ...mode allows unit to tilt to extreme angles Self-leveling 360 degree contunuous horizontal laser line with four laser dots at 90 degrees Self-leveing with visible and audible alarms when beyond leveling range Laser beam can be set to pulse for use with optional line detector 40-6637 Includes > Laser, 4 AA alkaline batteries, wall mount bracket, mounting strap, instruction manual with warranty card and a soft-sided carrying case read more

Johnson Level
$336.70
at Zoro

Stainless steel construction• Easy-to-read LCD• Zero setting at any position of the measuring range• Fine adjust...ment for easy setting of desired angle• Locking lever to prevent accidental adjustment• Blade can be locked• Changeable direction• 1454-0000 Includes > 1 3V CR2032 lithium battery, 70mm, 150mm, 300 blades, calibration square, hard case, instruction manual read more

Johnson Level
$8.50
at Zoro

JLT1075: Features: -Metric metal combo square.-Cast zinc head with black chip-resistant e-coating.-CNC machined square head for gr...eater accuracy.-Reversible head with lock bolt and steel screw.-Hardened, screw-in scriber won't fall out.-Durable acrylic vial.-Blade has rust-preventative coating for long life.-Slide head and lock into position for accurate measurement marking.-Hold 90 edge of head against board and use steel blade as a cutting guide.-Graduations of 0.13'', 0.06'', 0.03'' and mm. Specifications: -Ideal for measuring, marking and layout out either 90 or 45 work and check depth. Dimensions: -Dimensions: 12'' H x 5.5'' W x 0.75'' D. read more

Johnson Level
$29.53
at Zoro

Large easy-to-read digital LCD display• Measurements read in Millimeters, Inch-Decimal and Inch-Fraction and zero button to ...set display to 0.000 at any position• Resolution reads to 0.0005 and 0.01mm and 1/64 in fraction mode and working range 0 to 6 and 0 to 150mm• Scale in tenths of an inch up to 6 inches and millimeters up to 150 millimeters and thumb wheel and locking knob to set and lock the scale at any desired measurement• Ideal for inside, outside, depth and step measurements• Low battery indicator when display numbers are flashing and automatic shut-off after 5 minutes without use• 1889-0600 Includes > 1 LR44 lithium battery, instruction manual, hard case read more

Apex Tool Group
$277.98
at Amazon

Product Name: Atlas Chrome Clad Blade Width (-Inch): 1/2 -Inch/13 mm Blade Length (-Inch): 33 -Feet/10 m Blade Style: D6 Style of ...Case or Reel: Heavy Duty Frame Blade Finish: Chrome Clad Replacement Blade Cat No. : OC2910MME590 Bob Cut: 590 GM Bob Cut: 590 GM. read more

Apex Tool Group
$247.21
at Amazon

Product Name: Atlas Chrome Clad Blade Width (Inch): 1/2-Inch Blade Length (Inch): 18-Feet Blade Style: D4 Style of Case or Reel: H...eavy Duty Frame Blade Finish: Chrome Clad Replacement Blade Cat No. : OC129012SF59 Bob Cut: 590 Bob Cut: 590. read more

Apex Tool Group
$318.89
at Amazon

Product Name: Atlas Double Duty Blade Width (Inch): 1/2-Inch Blade Length (Inch): 66-Feet Blade Style: D1 Style of Case or Reel: H...eavy Duty Frame Blade Finish: Chrome Clad/Nubian Replacement Blade Cat No. : None Bob Cut: 5871/2 Bob Cut: 5871/2. read more

Extech Instruments
$219.99
at Amazon

1000 Amp True RMS AC/DC clamp meter has built-in non-contact IR thermometer with laser pointer. Measures AC/DC voltage, resistance..., frequency, capacitance and more. Peak function captures inrush currents and voltage transients. Zero function for DC current. Also measures temperatures with Type K thermometer. Dimensions L x W x H in. 10 1/2 x 4 x 2, Charger Included No, Storage Case Included No, Thermostate Range F Noncontact readings from -58-518F, Includes Type K bead probe, Laser Guide Yes, Batteries Required Yes, Single, Pair, or Set Single, Battery Type 9V, Common Usage Clamp meter w/diagnostics thermometer, Temperature Scale Celsius, Fahrenheit. 1.7in. 43mm circular jaw opening for conductors up to 750MCM or two 500MCM True RMS current and voltage measurements Diode Continuity Type K thermocouple measures temperatures from -4F to 1400F -20 to 760F Peak function captures inrush currents and voltage transients Data hold freezes display Min/max Zero function for DC current Autoranging with manual range button Auto power off CE certified CAT II-600V read more

RIDGID
$5,947.20
at Amazon

Small camera head maneuvers through multiple 11/2-inch 90 Deg. bends and 3-inch P-Traps; Hardened stainless steel and sapphire cry...stal lens port protect camera head; 30 fully adjustable white LEDs give proper illumination in each application. read more

Amprobe
$274.95
at Amazon

<div class="aplus"><p>The Amprobe SM-CAL1 is a sound meter calibrator for maintaining the accuracy of a sound level meter. It fits... sound meters with microphones that have a diameter of up to 1/2 inch. It produces two fixed sound level signals, 94 decibels (dB) and 114 dB, and has an output frequency of 1,000 hertz (Hz). The calibrator operates on a 9V battery (included), and a low-battery indicator shows when the unit's batteries need to be changed. It meets European conformity (CE) directives and complies with American National Standards Institute (ANSI) and International Electrotechnical Commission (IEC) standards. The SM-CAL1 weighs 0.6 lb. (285 g), and it measures 4.9 x 1.9 x 0.5 inches (125 x 48 x 12.7) mm, H x D, where H is height, the vertical distance from the lowest to highest point, and D is diameter, the distance from left to right across the widest part of a circle).</p><p>Sound meters measure sound pressure levels both to check acoustic fidelity and to verify compliance with noise pollution regulations in health and safety codes. The meters are used in a range of environments, including homes, schools, airports, automotive and machine shops, concert halls, recording studios, and hospitals. There are two classes of sound level meters. Type 1 sound meters have a wider frequency response and a tighter tolerance than type 2 sound level meters, and they are commonly used in applications that require precise measurements, such as research and law enforcement. Type 2 sound meters are less precise than type 1 meters and are used for taking general measurements, such as measuring noise levels in a machine shop. Sound level meters are weighted for frequency response according to their intended use. The most commonly used weightings are A, C, and Z. The A weighting imitates the response of the human ear to soft or moderate noise levels and can be used in most environmental noise measurement applications. The C weighting imitates the response of the human ear to loud noises and can be used in noisy environments. The Z weighting measures flat frequency response between 10Hz and 20kHz and is often used for reference measurements. </p><p> Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA</p><p><b>What?s in the Box?</b> <ul><li>SM-CAL1 sound meter calibrator</li><li>(1) 9V battery (installed)</li> <li>Instructions</li></ul></p></div> read more

Extech Instruments
$209.99
at Amazon

<div class="aplus"> <div style="width: 350px;" class="leftImage"> <div id="image0"><img alt="" src="http://ecx.images-amazon.com/i...mages/I/21QcmPovn3L.jpg" ></div> </div> <h5><div id="header0">Photo Tachometer</div></h5> <div id="text0" class="a-spacing-small"><p>Make non-contact RPM measurements (5 to 99,999 rpm) of rotating objects by pointing the integral light beam (6 inch target distance) at the reflective tape placed on the object to be measured. The memory button holds last reading and recalls min/max readings display.</p></div> <h5><div id="header1">What's in the Box</div></h5> <div id="text1" class="a-spacing-small"><p>Comes with four AA batteries, 23 inches (0.6 meter) reflective tape, carrying case, and user manual.</p></div> <h5><div id="header2">Accessories</div></h5> <div id="text2" class="a-spacing-small"><p>Reflective Tape for Photo Tachometers (461937) for use with any brand photo tachometer. Place a piece of reflective tape on the object to be measured and point the tachometer's integral light beam at it. Ten reflective tape strips. Each strip measures 23 x 0.25 inches (584 x 6 mm).</p></div> <h5><div id="header4">What is a Tachometer?</div></h5> <div id="text4" class="a-spacing-small"><p>A tachometer is a device that measures the angular speed of a rotating shaft in terms of revolutions per minute (RPM). Also, a tachometer can measure linear speed in terms of feet per minute (feet/minute) or meters per minute.</p></div> <h5><div id="header7">How do Contact Tachometers Operate?</div></h5> <div id="text7" class="a-spacing-small"><p>The sensor tip is placed in direct contact with the rotating object. After 2 seconds an accurate reading is displayed. Linear surface speed can also be measured by placing the edge of the wheel on the moving object.</p></div> <div class="break"></div><br> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7">How do Photo (Non-contact) Tachometers Operate?</div></h5> <div id="text7" class="a-spacing-small"><p>First, a small piece of reflective tape (approximately 1/4-inch) is mounted on the object to be measured. Second, the light beam or laser is pointed at the revolving tape. The reflection from the tape provides a reading to be displayed and updated once per second. For the most accurate measurements, the distance between the tachometer and the reflective tape should be within 6 inches for a light beam and up to 6.5 feet for a laser. Fluorescent or bright ambient lights may interfere with the measurement.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img alt="" src="http://ecx.images-amazon.com/images/I/11OVS5-RVuL.jpg" ></div> </div> </div> <div class="third-col last"> <h5><div id="header6">Which Extech Tachometer Model Is the One for You?</div></h5> <div id="text6" class="a-spacing-small"><p>A non-contact (photo) tachometer was designed for applications where it is not feasible to have the tachometer come in contact with the rotating device. This is the case in high-speed applications and/or where the object to be measured is not easily reached. A contact tachometer is also available for applications where direct contact of the tachometer with the object is preferred. You can also select a combination (contact/non-contact) tachometer for the maximum in flexibility.</p></div> </div> <div class="break"></div> <h4>More Extech Instruments to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img alt="" src="http://ecx.images-amazon.com/images/I/11fFDUtJTxL.jpg" ><div class="imageCaption">461891</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Contact Tachometer</div></h5> <div id="text3" class="a-spacing-small"><p>Surface wheels measure contact surface speeds (10 to 9,999 rpm) of rotating objects. The memory button holds last reading and recalls min/max readings display. Complete with wheels for linear surface speed (0.2 to 6560 feet/minute; 0.05 to 1999.9 meters/minute) or RPM measurements, four AA batteries, and carrying case. Also available: Replacement Wheels for Contact Tachometer (461990) include Two sets of cone tip, flat tip, and spare wheel.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Apex Tool Group
$457.56
at Amazon

Product Name: Atlas Stainless Steel Blade Width (Inch): 1/2-Inch Blade Length (Inch): 50-Feet Blade Style: D4 Style of Case or Ree...l: Heavy Duty Frame Blade Finish: Stainless Steel Replacement Blade Cat No. : OS1293F590 Bob Cut: 590 Bob Cut: 590. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping