Stanley-Proto Power Equipment & Tools

Refine By
Stanley-Proto
$118.99 $52.82

Stanley JC494 Proto Adjustable Pin Spanner Wrench 1-1/4-inch to 3-inch, 3/16-inch Pin Non-reflective black oxide finish for use wh...ere non-plated products are required. Precision machined pins provide engagement with side holes or slots. Used to tighten... read more

Stanley-Proto
$23.41

Stanley J704S Proto Black Oxide Adjustable Wrench 4-inch Non-reflective black oxide finish for use where non-plated products are r...equired. Extra wide jaw capacity. Square jaw opening provides strength and tight fit. SKU : ADIB001HWC5G2 read more

Stanley-Proto
$28.39

Stanley J2116 Proto 16-inch Aligning Pry Bar Application: for prying, positioning and aligning applications. 1/2-inch tip width 1/...2-inch shank width 16-inch overall length. SKU : ADIB000NVS0JE read more

Stanley-Proto
$399.99 $319.99

Stanley Proto J150WP 1/2-inch Square Drive Pistol Grip Impact Wrench offers class leading 1260 foot pounds of breakaway torque whi...le weighing only 4. 6 pounds. The titanium housing helps to reduce weight, improve balance and ensure maximum durability.... read more

Stanley-Proto
$177.02

Stanley J795 Proto 3 Piece Adjustable Wrench Set Satin finish provides corrosion resistance and a slip resistant grip. Extra wide ...jaw capacity. Square jaw opening provides strength and tight fit. Rugged I-beam style handle and reinforced stress areas;... read more

Stanley-Proto
$124.84

577-1432DB Features: -Steel shot. -30% more driving force with less effort. -Eliminates sting, vibration, and rebound. -For maximu...m safety in non-sparking applications near combustible materials.. Hammer Type: -Dead Blow. Dimensions: Overall Product... read more

Stanley-Proto
$30.52

Stanley J5334CF Proto 1/2-inch Drive Open-End Crowfoot Wrench 1-1/16-inch Crowfoot wrenches are used in hard to reach, restricted ...access situations where a standard wrench or ratchet cannot reach. Anti-Slip Design Open End (ASD). The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding. Broad size range ensures the right tool for the application will be available. Typically used in lower torque applications. Full Polish finish provides corrosion resistance and easy to clean surfaces. Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces. Use with locking extensions to reach into spaces too small for a mechanic's arm or where the fastener is out of site. read more

Stanley-Proto
$53.21

Stanley J49007S2 Proto 7 Piece Roll Pin Punch Set Made from S2 steel and specially heat-treated for greater strength and durabilit...y. One-piece design for strength and durability. Reverse taper to help prevent binding. Modified parabolic striking end to help reduce mushrooming and chipping. Black oxide finish to help prevent rust corrosion; extending tool life and performance. A polished identification panel on one of the flats is marked with the tool number and size in a black inlay. Set offers a wide range of sizes to handle a variety of jobs. Includes a pouch for convenient storage solution. Proto 7 Piece Roll Pin Punch Set Includes the following items: J49014S2, J49018S2, J49116S2, J49316S2, J49332S2, J49532S2, J49732S2, J25TR31C. read more

Stanley-Proto
$74.08 $48.88

FEATURES:•Black oxide finish. •Large striking surface for surer blow contact and more efficient transmittal of force to fastener. ...•Short handle permits use in close quarters. •Box opening designed to remain on fastener when wrench is struck. •For use where extreme force is necessary to loosen or set large fasteners. •Heavy box walls provide greater torque transmission. •Offset handle clears obstructions. read more

Stanley-Proto
$157.08

Stanley J6013C Proto 1/2-inch Drive Fixed Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% in clockwise direction ...and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley-Proto
$16.74 $14.22

Stanley J1210HA Proto Satin Combination Wrench 5/16-inch - 6 Point Satin finish provides corrosion resistance and a slip resistant... grip. 6 point box end allows for large wrench to fastener contact area which helps prevent rounding of the fastener. Fractional sizes 11/32-inch and smaller and sizes 1-5/16-inch and larger do not have the ASD feature. Box ends incorporate the Torque Plus system. read more

Stanley-Proto
$11.52

Stanley J49116S2 Proto 1/16-inch Roll Pin Punch One-piece design for strength and durability. Reverse taper to help prevent bindin...g. Made from S2 steel and specially heat-treated for greater strength and durability. Modified parabolic striking end to help reduce mushrooming and chipping. Black oxide finish to help prevent rust corrosion; extending tool life and performance. A polished identification panel on one of the flats is marked with the tool number and size in a black inlay. read more

Stanley-Proto
$17.64 $14.73

Stanley J6064RK Proto 3/8-inch Drive Ratchet Head Repair Kit - Torque Wrench 1/4-inch to 1-inch ratchet wheels made from alloy ste...el for uncompromising strength and durability. Field repair your torque wrench ratchet head easily with the corresponding repair kit. Rachet Head Repair Kits - Torque Wrench 3/8-inch Drive size Use with: J6064C, J6064CX, J6064CXCERT. read more

Stanley-Proto
$93.00 $73.81

Stanley J795 Proto 3 Piece Adjustable Wrench Set Satin finish provides corrosion resistance and a slip resistant grip. Extra wide ...jaw capacity. Square jaw opening provides strength and tight fit. Rugged I-beam style handle and reinforced stress areas; radius corner design. Proto 3 Piece Adjustable Wrench Set Includes the following items: J708, J710, J712, J25TR22C. read more

Stanley-Proto
$25.06 $24.85

The XL series pliers has an exclusive flush fastener providing better access with increased user adjustability, making it 30% narr...ower. It also allows the pliers to lay flat in the work place, preventing snagging on tool belts and pouches. This is a nut and bolt assembly and can easily be adjusted by the end user in the field. read more

Stanley-Proto
$28.96 $17.78

FEATURES:•Satin finish provides corrosion resistance and a slip resistant grip. •12 point box end allows for fine indexing, helpin...g to improve speed and access. Fits 4, 6 and 12 point fasteners. •Anti-Slip Design (ASD) open end. -Patented locking grooves help prevent the wrench from slipping off the fastener when turning.-The arched surfaces are designed to spread the contact forces over a greater area.-Loads are kept off the corners of the fastener which helps prevent fastener rounding. •Box ends incorporate the TorquePlusTM system. •Proto® TorquePlusTM wrenches are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. •The TorquePlusTM design is a high performance drive configuration which allows for quick and easy wrench engagement to the fastener flats, not the corners. •The TorquePlusTM configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the box end, minimizing slippage. •The TorquePlusTM internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners. read more

Stanley-Proto
$20.69

Stanley J2140 Proto 14-inch Large Handle Pry Bar Large four-sided handle for a better grip and added comfort. 5/8-inch tip width 1...4-1/2-inch overall length. read more

Stanley-Proto
$111.07

Stanley J3700A Proto 7 Piece Combination Flare Nut Wrench Set - 6 Point Satin finish provides corrosion resistance and a slip-resi...stant grip. Flare nut box end incorporates the Torque Plus system. 2.24-lbs Weight Proto 7 Piece Combination Flare Nut Wrench Set - 6 Point Includes the following items: J3751, J3752, J3753, J3754, J3755, J3756, J3757, J25TR03C. read more

Stanley-Proto
$10.75

Stanley J48532LS2 Proto 5/32-inch Super-Duty Long Punch Pin Reverse taper to help prevent binding. Made from S2 steel and speciall...y heat-treated for greater strength and durability. Modified parabolic striking end to help reduce mushrooming and chipping. Black oxide finish to help prevent rust corrosion; extending tool life and performance. A polished identification panel on one of the flats is marked with the tool number and size in a black inlay. read more

Stanley-Proto
$27.47

Stanley J3814 Proto Ratcheting Flare-Nut Wrench 7/16-inch - 12 Point Non-reflective black oxide finish for use where non-plated pr...oducts are required. 12 Point flare nut box end allows for fine indexing, helping to improve speed and access. Pivoting head allows user to place the wrench over the connected pipes to reach the fastener. read more

Stanley-Proto
$23.58 $18.58

Stanley J1209MH-T500 Proto Full Polish Combination Wrench 9 mm - 6 Point Full polish finish provides corrosion resistance and easy... to clean surfaces. 6 point box end allows for large wrench to fastener contact area which helps prevent rounding of the fastener. Anti-Slip Design (ASD) open end. Metric sizes 9mm and smaller do not have the ASD feature. Box ends incorporate the Torque Plus system. read more

Stanley-Proto
$21.01 $16.01

Stanley Proto ratchet wrenches are engineered to be more efficient and stronger than ever. Proto engineers continually work to cre...ate wrenches that grip tighter and let users apply more torque without fear of fastener damage. The box ends incorporate the TorquePlus system. Special heat-treated alloy steel permits slim shanks for strength and durability. This wrench is ideal for use on stubborn or damaged fasteners. All are corrosion resistant and have easy to clean surfaces. read more

Stanley-Proto
$30.84 $27.59

Stanley J1183MA-A Proto Offset Double Box Reversible Ratcheting Wrench 11 x 13 mm - 6 Point Full polish finish provides corrosion ...resistance and easy to clean surfaces. 25° offset box end helps keep shank clear of obstructions. Built in retaining ring in each ratchet wheel adds speed and convenience for greater accessibility. Shorter length for access to confined workspaces. 6 point box end allows larger wrench to fastener contact area which helps prevent rounding of the fastener. read more

Stanley-Proto
$46.75

For over 160 years, the Stanley Proto brand has been synonymous with quality, reliable products. Their tools are made in America b...ecause they believe making the highest quality tools comes first. Proto tools are heat forged and nickel-plated. Having sheer tool strength, they won't snap, bend or bust when called to duty. They are tested to thousands of cycles. And they are proven - having done the job you're asking of them for decades, literally. The combination wrench is their birthright and helped build '34 Fords, The Golden Gate Bridge and Apollo 11. Over 100 years strong and still growing; No one makes tools better, more durable or safer. read more

Stanley-Proto
$36.17

For over 160 years, the Stanley Proto brand has been synonymous with quality, reliable products. Their tools are made in America b...ecause they believe making the highest quality tools comes first. Proto tools are heat forged and nickel-plated. Having sheer tool strength, they won't snap, bend or bust when called to duty. They are tested to thousands of cycles. And they are proven - having done the job you're asking of them for decades, literally. The combination wrench is their birthright and helped build '34 Fords, The Golden Gate Bridge and Apollo 11. Over 100 years strong and still growing; No one makes tools better, more durable or safer. read more

Stanley-Proto
$31.69 $24.74

Stanley J394 Proto Retaining Ring Pliers Internal - 9-inch Used with Internal Retaining Rings. Fixed tips are precision formed and... induction hardened for accurate fit and long wear. .090 Tip size. read more

Stanley-Proto
$145.28 $121.62

Stanley J47000MCF Proto 1/4-inch Drive 7 Piece Metric Crowfoot Wrench Set Crowfoot wrenches are used in hard to reach, restricted ...access situations where a standard wrench or ratchet cannot reach. Anti-Slip Design open end (ASD). The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding. Broad size range ensures the right tool for the application will be available. Typically used in lower torque applications. Full Polish finish provides corrosion resistance and easy to clean surfaces. Use with locking extensions to reach into spaces too small for a mechanic's arm or where the fastener is out of site. Proto 1/4" Drive 7 Piece Metric Crowfoot Wrench Set Includes the following items: J4707MCF, J4708MCF, J4710MCF, J4711MCF, J4712MCF, J4713MCF, J4714MCF. read more

Stanley-Proto
$50.46 $38.28

Stanley J269G Proto Lineman's Pliers High Leverage - 9-1/4-inch Jaws have offset rivet for increased leverage. Designed for cuttin...g No. 8 and other large wires. Diamond serrated jaws. Plastisol grips for added comfort. read more

Stanley-Proto
$18.43 $18.42

Stanley J1112 Proto Refrigeration Wrench 1/4-inch x 3/16-inch Square/1/4-inch x 3/16-inch Hex Full polish finish provides corrosio...n resistance and easy to clean surfaces. Designed for servicing automotive, commercial and residential air conditioners, refrigeration units and freezers. Hex openings are used for packing gland fittings, mounting bolts, clutch bolts, tubing fittings, dust cap nuts and oil check plugs. Square openings are used on male service valves, plug fittings, compressor valves and refrigerant charging tanks. Reversing switch lever allows for easy changes in turning direction which helps improve speed. read more

Stanley-Proto
$40.05 $35.84

577-4934CF Features: -Anti-Slip Design open end (ASD) has patented locking grooves that help prevent the wrench from slipping off ...the fastener when turning. -Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach. -Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces. -Drive Type: Square. Use: -Open End Wrench. Quantity: -Single. Measurement Type: -SAE. Product Type: -Wrenches. Dimensions: Overall Product Weight: -0.24 Pounds. read more

Stanley-Proto
$27.63

For over 160 years, the Stanley Proto brand has been synonymous with quality, reliable products. Their tools are made in America b...ecause they believe making the highest quality tools comes first. Proto tools are heat forged and nickel-plated. Having sheer tool strength, they won't snap, bend or bust when called to duty. They are tested to thousands of cycles. And they are proven - having done the job you're asking of them for decades, literally. The combination wrench is their birthright and helped build '34 Fords, The Golden Gate Bridge and Apollo 11. Over 100 years strong and still growing; No one makes tools better, more durable or safer. read more

Stanley-Proto
$30.21 $28.40

577-1068M Features: -TorqueplusTM fastening system drives off fastener body, more easily removing damaged fasteners. -Reduces risk... of fastener rounding. -Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. -Applies up to 15% more torque to fastener. Use: -Box End Wrench. Quantity: -Single. Number of Points: -12. Measurement Type: -Metric. Product Type: -Wrenches. Dimensions: Overall Product Weight: -0.71 Pounds. read more

Stanley-Proto
$14.77

Stanley J1280M Proto Black Oxide XL Combination Wrench 80 mm - 12 Point Black Oxide Finish. For use on extra large fasteners. Used... in Mining, Oil & Gas, Industrial Construction. Forged heads with machined openings. 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point. read more

Stanley-Proto
$35.26 $25.85

Introducing the new Skyhook Tether and Transfer System from Stanley Proto which is the next generation of safety technology for po...sitive control hand tools at any height, work areas requiring material exclusion (FME) or anywhere simple accidents become costly mistakes.  Since a better tether system is a safer tether system, SkyHook provides secure tool transfers, a free range of motion, and positive tool control at the worksite.  The SkyHook System builds on existing carabiner technology to provide secure transfers at every point along with a SkyDock that attaches to the wrist.  The SkyDock incorporates a short lanyard that is light, tight and less likely to get caught on other equipment.  You can attach the SkyDock to a hand, wrist, belt, tool apron, co-worker, work truck or a central station.  By simpy "swiping to switch" tools can be transferred securely and safely.  The Stanley Proto SkyHook and SkyDock system works with a complete line of sockets, drive tools, wrenches, striking tools, pliers and accessories. read more

Stanley-Proto
$34.95

Stanley J289LNXL Proto Long Nose Locking Pliers - 9-1/32-inch Long slim jaw design. Curved section. Pliers can reach deep into rec...essed areas. Can hold rounded objects. Great for holding, placing and extracting pieces in awkward areas, engines, etc. read more

Stanley-Proto
$18.18

Stanley J9638B Proto 3/8-inch x 6-inch Brass Drift Punch Spark-resistant, mar-resistant. Designed to help prevent damage to the ob...ject being struck. Brass Drift Punch 3/8-inch Tip width 6-inch Overall length. read more

Stanley-Proto
$168.90 $156.95

For over 160 years, the Stanley Proto brand has been synonymous with quality, reliable products. Their tools are made in America b...ecause they believe making the highest quality tools comes first. Proto tools are heat forged and nickel-plated. Having sheer tool strength, they won't snap, bend or bust when called to duty. They are tested to thousands of cycles. And they are proven - having done the job you're asking of them for decades, literally. The combination wrench is their birthright and helped build '34 Fords, The Golden Gate Bridge and Apollo 11. Over 100 years strong and still growing; No one makes tools better, more durable or safer. read more

Stanley-Proto
$32.60

For over 160 years, the Stanley Proto brand has been synonymous with quality, reliable products. Their tools are made in America b...ecause they believe making the highest quality tools comes first. Proto tools are heat forged and nickel-plated. Having sheer tool strength, they won't snap, bend or bust when called to duty. They are tested to thousands of cycles. And they are proven - having done the job you're asking of them for decades, literally. The combination wrench is their birthright and helped build '34 Fords, The Golden Gate Bridge and Apollo 11. Over 100 years strong and still growing; No one makes tools better, more durable or safer. read more

Stanley-Proto
$60.60 $34.33

Stanley JSCVM13A Proto Full Polish Combination Reversible Ratcheting Wrench 13 mm - Spline Anti-Slip Design (ASD) open end. Smooth... transition from head to shank. Industrial strength I-Beam shank provides broad bearing surface helping improve comfort and helping reduce hand fatigue. Protected switch lever helps prevent accidental reversal. Compact ratcheting head improves access. 72 teeth provide 5-Degree ratcheting. read more

Stanley-Proto
$59.11 $37.22

Stanley JC495 Proto Adjustable Pin Spanner Wrench 1-1/4-inch to 3-inch, 1/4-inch Pin Non-reflective black oxide finish for use whe...re non-plated products are required. Precision machined pins provide engagement with side holes or slots. Used to tighten side slot nuts on collars, lock nuts and bearings. read more

Stanley-Proto
$160.33 $139.91

Stanley J6008C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft.-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley-Proto
$73.64 $68.49

Stanley J3700M Proto 5 Piece Metric Double End Flare Nut Wrench Set - 6 Point Satin finish provides corrosion resistance and a sli...p resistant grip. Flare nut box ends incorporates the Torque Plus system. 1.25-lbs Weight Proto 5 Piece Metric Double End Flare Nut Wrench Set - 6 Point Includes the following items: J3707M, J3709M, J3710M, J3713M, J3715M, J25TR06C. read more

Stanley-Proto
$36.77 $35.03

Stanley JC906C Proto Spud Handle Offset Open-End Wrench 15/16-inch Non-reflective black oxide finish for use where non-plated prod...ucts are required. Long offset handle provides greater leverage and clearance for knuckles and obstructions. Hardened tapered handle aligns bolt and rivet holes. Openings are precision broached for proper fit. read more

Stanley-Proto
$34.72 $30.90

577-1072M Features: -TorqueplusTM fastening system drives off fastener body, more easily removing damaged fasteners. -Reduces risk... of fastener rounding. -Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. -Applies up to 15% more torque to fastener. Use: -Box End Wrench. Quantity: -Single. Number of Points: -12. Measurement Type: -Metric. Product Type: -Wrenches. Dimensions: Overall Product Weight: -0.14 Pounds. read more

Stanley-Proto
$23.27 $16.54

Stanley J6008RK Proto 1/2-inch Drive Ratchet Head Repair Kit - Torque Wrench 1/4-inch to 1-inch ratchet wheels made from alloy ste...el for uncompromising strength and durability. Field repair your torque wrench ratchet head easily with the corresponding repair kit. Rachet Head Repair Kits - Torque Wrench 1/2-inch Drive size Use with: J6008C, J6008CX, J6008CXCERT. read more

Stanley-Proto
$230.93

577-SBV-8S Features: -Non-reversing ratcheting wrenches can be flipped over to turn the fastener in the opposite direction. -Ratch...eting spline box end is countersunk for easy application to the fastener. -Spline design also helps prevent rounding of corners and other fastener damage that could lead to Foreign Object Damage (FOD). -Spline design enables the wrench to contact conventional fasteners away from the corners, which help apply force over a large area helping to reduce risk of fastener rounding. Use: -Ratchets. Head Style: -Round. Quantity: -Set. Product Type: -Tool. Dimensions: Overall Product Weight: -4.19 Pounds. read more

Stanley-Proto
$27.00 $16.56

The XL series pliers has an exclusive flush fastener providing better access with increased user adjustability, making it 30% narr...ower. It also allows the pliers to lay flat in the work place, preventing snagging on tool belts and pouches. This is a nut and bolt assembly and can easily be adjusted by the end user in the field. read more

Stanley-Proto
$501.65

Stanley J53000CFFN Proto 1/2-inch Drive 15 Piece Crowfoot Flare Nut Wrench Set Crowfoot wrenches are used in hard to reach, restri...cted access situations where a standard wrench or ratchet cannot reach. 12 point flare nut allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners. Broad size range ensures the right tool for the application will be available. Typically used in lower torque applications. Full polish finish provides corrosion resistance and easy to clean surfaces. Proto 1/2" Drive 15 Piece Crowfoot Flare Nut Wrench Set Includes the following items: J5336FL, J5338FL, J5340FL, J5342FL, J5344FL, J5346FL, J5348FL, J5350FL, J5352FL, J5354FL, J5356FL, J5358FL, J5360FL, J5362FL, J5364FL. read more

Stanley-Proto
$231.96 $159.97

Stanley J6113F Proto 3/8-inch Drive Dial Torque Wrench 10-50 ft-lbs, 1.4-7 mkg Accurate to 4% of torque reading in both directions... at 20% to 100% of full scale. Industrial all steel or aluminum torque transfer components. High alloy torsion drive design — accuracy not effected by hand position. Dual scale (English/Metric) with clockwise and counterclockwise operation — fewer wrenches needed to complete job. Memory needles are standard on all wrenches except electric light models. Easy-to-read, high contrast scale. Laser marked serial number for traceability. N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench. read more

Stanley-Proto
$53.15

577-4972CF Features: -Anti-Slip Design open end (ASD) has patented locking grooves that help prevent the wrench from slipping off ...the fastener when turning. -Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach. -Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces. -Drive Type: Square. Use: -Open End Wrench. Quantity: -Single. Measurement Type: -SAE. Product Type: -Wrenches. Dimensions: Overall Product Weight: -0.89 Pounds. read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts