Refine By
Inland
$29.20 $29.99
at Sears

Inland Pro Tool Kit 400 Plus - Tool kit

Grey Pneumatic
$67.95 $120.99
at Sears

Features and Benefits Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the ...most up to date industrial specifications Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength Packaged in a molded storage case Limited WarrantyThe impact standard length fractional master socket set features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. Set contains the following sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16 and 1-1/2. read more

Dewalt
$39.66 $49.99
at Sears

10 Piece 1/2 Impact Ready Socket Set Set Includes :1/4” Adapter 1/2” Adapter8 SocketsCarrying caseSocket Sizes :7/161/29/165/8...11/163/413/167/8 read more

Sunex
$135.89 $150.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive, 12 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm and 24mm sockets. read more

Sunex
$70.15 $106.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive, 12 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm and 24mm sockets. read more

K Tool International
$17.09 $18.99
at Sears

Features and Benefits: Chrome moly steel, heat treated Carded on socket railIncludes: T-10, 15, 20, 25, 27, 30, 40, 45, and 50.

Grey Pneumatic
$114.25 $218.99
at Sears

Features and Benefits Made of high quality steel (chrome-molybdenum) Also includes 1/2 x 1/2 Universal Joint and 3 Extension Engin...eered specifically for use with impact tools, using the most up to date industrial specifications Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength Lifetime WarrantyThis set contains both standard and deep lengths. Each impact socket features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. Set contains the following sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm in standard and deep length. All packaged in a blow molded case. read more

Grey Pneumatic
$110.95 $208.99
at Sears

Features and Benefits Made of high quality steel (chrome-molybdenum) Included is a 1/2 x 1/2 universal joint and a 3 extension Eng...ineered specifically for use with impact tools, using the most up to date industrial specifications Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength Lifetime WarrantyThis set contains both standard and deep lengths. Each impact socket features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. Set contains the following sizes: 7/16 , 1/2 , 9/16 , 5/8 , 11/16 , 3/4 , 13/16 , 7/8 , 15/16 , 1 , 1-1/16 , 1-1/8 , 1-1/4 in standard and deep length. All packaged in a blow molded case. read more

Sunex
$50.52 $63.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design-to extend the life of the fastener Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8 deep drive, 12 point impact socket set designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. This set includes the following sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1. read more

GearWrench
$29.17 $36.99
at Sears

Includes the following bit sockets: 6MM and 8MM (3/8 Drive) and 10MM and 12MM (1/2 Drive). Chrome socket base heat treated for dur...ability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail read more

K Tool International
$27.27 $28.99
at Sears

Features and Benefits: Made of chrome vanadium steel Heat treated Packaged on a metal railIncludes sizes: 7mm through 21mm

Grey Pneumatic
$126.85 $208.99
at Sears

Features and Benefits: Sockets have 3/8 drive and are 6 point All Duo-Socket sockets are marked by both roll stamp and large laser... etching on the opposite side The ratchet included is a 72 tooth quick release Wobble extension provide 15 degree of deflection and can also be locked straight for normal use Packaged in blow molded caseThe thin wall design of chrome hand sockets are combined with the strength and durability of Grey Pneumatic impact sockets to create the Duo-Socket . This 35 piece set is built specifically to address the needs of the professional technician using hand tools, cordless impact tools and air tools. The Duo-Socket provides one socket for all applications. This set includes the following: 72 tooth quick release ratchet, 3 and 6 wobble extension and the socket sizes include: Standard and Deep Metric: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm. read more

Sunex
$97.95 $170.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability 12 point d...esign means less wear on the fasteners Fully guaranteed Included in a heavy-duty blow mold caseNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8 universal drive impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. This set includes: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm. read more

Astro Pneumatic
$52.15 $90.99
at Sears

Features and Benefits: Hollow design creates room for removing longer bolts by pushing out the plastic insert Blow molded case for... storage and transport Case dimensions: 10-1/4 L x 6-1/4 W x 1-3/4 HThis socket set features protective sleeves and internal plastic inserts that prevent scratching of wheels or decorative lug nuts. Size range: 13/16, 3/4, 7/8, 1, 1-1/16, 17mm, 21mm. read more

Sunex
$23.39 $25.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This standard 3/8 drive, 6 point impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Includes the following sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4. read more

Sunex
$25.96 $28.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This metric 1/2 drive, 6 point impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. The following sizes include: 9mm, 10mm, 11mm, 13mm, 14mm, 15mm, 17mm, and 19mm. read more

K Tool International
$32.39 $35.99
at Sears

Features and Benefits: Heat treated alloy steel Convenient vinyl holder Made the U.S.A.Includes: T-10, 15, 20, 25, 27, 30, 40, 45,... 47, 50, 55, and 60 read more

GearWrench
$40.71 $59.99
at Sears

Set includes the following sockets:1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1. Packaged on slide ra...il read more

Sunex
$286.15 $536.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Fully guar...anteed Included in a heavy-duty blow mold caseNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/4 deep drive impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. This set includes: 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 1-15/16 and 2. read more

GearWrench
$54.98 $68.99
at Sears

Includes the following: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM and 10MM (3/8 Drive) and 12MM, 14MM and 17MM (1/2 Drive). Chrome socket base ...heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail read more

GearWrench
$63.89 $70.99
at Sears

Includes the following: E-4, E-5, E-6, E7, and E-8 (1/4 Drive); E-10, E-12, E-14, and E-16 (3/8Drive) and E-18, E-20, E22, and E-2...4 (1/2 Drive). Includes slide rail read more

GearWrench
$51.29 $56.99
at Sears

Includes 6MM, 8MM, 10MM, 12MM, 14M, 17MM and 19MM Hex Bit sockets. Chrome socket base heat treated for durability and serviceabili...ty. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail. read more

K Tool International
$211.09 $272.99
at Sears

Features and Benefits: Includes 16 sockets from 3/4 to 2, ratchet, t-handle and 4 and 8 extensions All sockets are 6 point chrome ...vanadium Packaged in blow molded plastic case read more

Craftsman
$44.99 $49.99
at Sears

6 piece Fractional Mid-Length Ball Hex Bit Socket Set. Mid-length design allows for improved access over standard length and non-b...all hex bit sockets. A 20 degree working angle allows for an indirect approach to hard-to-reach fasteners. Made of high strength S2 steel. Set contains: 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 in. sized hex bit sockets. read more

Craftsman
$44.99 $49.99
at Sears

Craftsman Bit Driver Set Gives You The Variety You NeedInches or metric, slotted or Torx, the Craftsman 55-pc bit driver set gives... you the convenience and speed to get the job done right. The three-position ratcheting handle gives you the torque you want, while the 3/8-inch drive and 1/4-inch adapter let you use a range of sockets, including the 28 that come with this set.The screwdriver components in this Craftsman bit driver set are every bit as versatile. They come in Phillips, slotted, hex and Torx, in popular sizes, both metric and inch. The large ergonomic handle is easy to grip, while the end cap removes for handy bit storage. Except for the screwdriver bits, the entire set is back by Craftsman's lifetime warranty. read more

Astro Pneumatic
$69.76 $85.99
at Sears

Features and Benefits: Packaged in a blow molded case Kit includes the following Axle Nut Sockets: 29mm, 30mm, 32mm, 34mm, 35mm, 3...6mm and 38mm all 1/2 Drive. read more

K Tool International
$66.31 $88.99
at Sears

Features and Benefits: Manufactured with heat treated chrome vanadium steel Packaged in a metal boxThis set includes 13 sockets fr...om 7/16 thru 1-1/4, ratchet, breaker bar and extension. read more

GearWrench
$41.13 $56.99
at Sears

Includes the following bit sockets: 1/8:, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8. Ball end allows you to work on hex fasteners from d...ifficult angles. Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail. read more

GearWrench
$38.65 $87.99
at Sears

Includes the following: 1/16, 5/64. 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8. Chrome socket base heat treated fo...r durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail read more

K Tool International
$21.59 $23.99
at Sears

Features and Benefits: Chrome vanadium steel heat treated Carded on socket railIncludes: T10, 15, 20, 25, 27, 30, 40, 45, 47, 50, ...55, and 60. read more

GearWrench
$47.65 $65.99
at Sears

Set includes the following range of sockets: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 and 15/16. Sockets are full polish nickel chro...me plated. Large hard stamp identification. Turn down at base provides grip surface to pull sockets off ratchets. Entry angle guides fastener. Packaged on slide rail. read more

GearWrench
$187.15 $303.99
at Sears

Full polish nickel chrome plated Turn down at base provides grip surface to pull sockets off ratchets Double lines (SAE) and knurl...ed lines (MM) to easily identify standard vs. metric sockets Large hard stamped identification Surface Driveandreg; technology Entry angle guides fastener. Serration depth as deep as the fastener holds fastener for ease of access. Set includes: standard sizes: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1/16, 1-1/8; deep sizes: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16; metric sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm; deep metric sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm; 3 and 5 extensions, universal joint and full polish teardrop ratchet. Packaged in a blow molded case. read more

Sunex
$26.99 $29.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive, deep thin wall flip impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 3/4 x 13/16, 7/8 x 15/16, 19mm x 21mm flip sockets; and a 3 socket extension. read more

Grey Pneumatic
$113.95 $191.99
at Sears

Features and Benefits Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the ...most up to date industrial specifications Made to transfer the pressure from the thinnest part of the socket wall toward section, resulting in increased strength Packaged in a molded storage case Limited WarrantyThe impact deep length fractional master socket set features high torque drives. This feature limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost. Set contains the following sizes: 3/8 , 7/16 , 1/2 , 9/16 , 5/8 , 11/16 , 3/4 , 13/16 , 7/8 , 15/16 , 1 , 1-1/16 , 1-1/8 , 1-3/16 , 1-1/4 , 1-5/16 , 1-3/8 , 1-7/16 , and 1-1/2 . read more

GearWrench
$36.85 $64.99
at Sears

Set includes the following sockets: 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM and 17MM. Two extension bars (3 and 6). Ful...l polish teardrop ratchet. Packaged in blow mold case for easy storage, organization and transportation of tools. read more

GearWrench
$48.56 $59.99
at Sears

Set includes the following deep 12 Pt. sockets: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8. Packaged on slide... rail read more

Grey Pneumatic
$189.85 $295.99
at Sears

Manufacturer Part Number: 82222D1/2 Dr. 22Pc Fractional Dp Duoskt SetSales Unit: EACHPricing Unit: EACHCountry of Origin: TW

Sunex
$106.09 $154.99
at Sears

Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius cor...ner design - to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive, 6 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 and 1-1/4 deep sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm and 27mm sockets; and 2 deep flip sockets: 3/4 x 13/16 and 19mm x 21mm. read more

GearWrench
$31.28 $47.99
at Sears

Includes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 Hex Bit sockets. Chrome socket base heat treated for durability and serviceabilit...y. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail. read more

KD Tools
$12.09 $18.99
at Sears

Features and Benefits Patented bit holding system forces bit surface to opposing side for maximum retention Chrome sockets; heat t...reated for durability and service ability S2 and Alloy steel bits Packaged in patented impact resistant Slide Rail System for ease in socket storage11 Piece 3/8 Tamper-Proof Torxandreg; Bit Socket Set includes T10, T15, T20, T25, T27, T30, T40, T45, and T50 Torxandreg; Bit Sockets, 1/4 Bit Adapter, and 5/16 Bit Adapter packaged on a clip rail. read more

GearWrench
$53.09 $58.99
at Sears

Includes the following 2 Pc. Torx Tamper-Proof sockets: 1/4 Drive T-8, T-10, T-15, T20, T-25, T-27, and T-30. 3/8 Drive T-40, T-45..., T-47, T-50 and T-55. 1/2 Drive T-60. Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. Alloy steel bits. Includes slide rail. read more

GearWrench
$88.15 $213.99
at Sears

36 Pc Master Torx Set Gives You a Grip Crafted from rugged high tensile strength steel, hardened to withstand tough torquing condi...tions, this Gearwrench master Torx set with hex bit sockets gives you the traction and resilience you need to get the job done right. Featuring a specially designed dimpled bit interface, each socket forces the bit surface against the opposite contact side, for superior traction and less slip with every turn. read more

K Tool International
$36.89 $40.99
at Sears

Features and Benefits: Manufactured with heat treated chrome vanadium steel Packaged on a railSet includes sizes: 1/2, 9/16, 5/8, ...11/16, , 3/4, 13/16, 7/8 and 15/16. read more

K Tool International
$37.79 $41.99
at Sears

Features and Benefits: Made of chrome vanadium steel Heat treated Packaged on a metal railIncludes sizes: 7mm, 8mm, 9mm, 10mm, 11m...m, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm and 21mm sockets. read more

GearWrench
$38.80 $55.99
at Sears

Includes the following bit sockets: 4MM, 5MM and 6MM Slotted; #1, #2, and #3 Phillips; #2 Pozidriv . Chrome socket base heat treat...ed for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail. read more

GearWrench
$78.76 $102.99
at Sears

Shop for Hand Tools at The Home Depot. The 23-Piece 1/2 in. Drive (Standard/Deep) Metric Socket Set is made of chrome vanadium ste...el for strength. The large size markings are for easy readability. The serration depth is as deep as the fastener. read more

GearWrench
$59.53 $82.99
at Sears

Manufacturer Part Number: 8055924Pc 3/8 Drive Metric Socket SetSales Unit: EACHPricing Unit: EACHCountry of Origin: CN

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping