Nicholson Power Equipment & Tools

Refine By
Nicholson
$16.29

Rectangular shape like a Hand File but only 2/3 as wide. Double cut on 2 sides only with safe edges. Technical InformationFeatures...: Rectangle in shape Safe edges Tapers in thickness Notes: Approximately 0.1" thick, 0.47" wide File length is measured... read more

Nicholson
$179.99

These Swiss Cut, round handle needle files are made to exacting measurements for precise detail work. Double Cut. Technical Inform...ationFeatures: Assortment of 12 files, Barrette, Crossing, Equaling, Flat, Half Round, Joint, Knife, Marking, Round,... read more

Nicholson
$109.99

Set includes; 10" flat bastard, 10" mill bastard, 10" flat smooth, 10" half round bastard, 10" square bastard, 10" round bastard, ...7" slim taper, file card, used to clean file teeth and a convenient roll up vinyl carrying case. Technical... read more

Nicholson
$21.99

Rectangular shaped file is narrow for detail finishing or working in tight areas. Double cut on 2 sides with safe edges.Technical ...InformationFeatures: Rectangle in shape Safe edges Tapers in thickness Notes: Approximately 0.135" thick, 0.36" wide File... read more

Nicholson
$16.99

A clean file cuts better. These combination card/brushes are designed especially to remove metal particles from files. One side ha...s synthetic bristles, the other steel wire bristles. A few strokes removes all of the metal slivers, resulting in better... read more

Nicholson
$14.99

These Swiss Cut, round handle needle files are made to exacting measurements for precise detail work. Double Cut. Technical Inform...ationFeatures: Quality needle file used by toolmakers, jewelers, gunsmiths Knurled handle Notes: Approximately 0.105"... read more

Nicholson
$17.99

Similar to Pillar and Pillar Narrow Files but narrower in length for extremely tight spaces and fine detail work. Double cut on tw...o sides with safe edges. 4" long. Technical InformationFeatures: Rectangle in shape Safe edges Tapers in thickness Notes:... read more

Nicholson
$16.99

Designed to cut faster than regular mill files for lathe filing, these rectangular-shaped, single-cut, safe-edge files are just th...e ticket for filing the turning marks off of a barrel for that smoother-than-glass finish. Technical InformationFeatures:... read more

Nicholson
$11.79

These Mill Files feature a rectangular cross section and are perfect for sharpening mill or circular saws. Technical InformationFe...atures: Flat shape Notes: Approximately 0.15" thick, 0.98" wide tapering to 0.71" File length is measured exclusive of... read more

Nicholson
$20.99

These are extra narrow, double-cut files for getting into those hard-to-reach areas for final parts fitting. They cut on two sides... and have one safe edge, so they are great for square notch, extractor and ejector fitting.Technical InformationMaterial:... read more

Nicholson
$19.99

These are extra narrow, double-cut files for getting into those hard-to-reach areas for final parts fitting. They cut on two sides... and have one safe edge, so they are great for square notch, extractor and ejector fitting.Technical InformationMaterial:... read more

Nicholson
$17.99

Designed to cut faster than regular mill files for lathe filing, these rectangular-shaped, single-cut, safe-edge files are just th...e ticket for filing the turning marks off of a barrel for that smoother-than-glass finish. Technical InformationFeatures:... read more

Nicholson
$12.99

A rectangular double-cut flat file for faster material removal, one safe edge. Technical InformationMaterial: Tool Steel Notes: Ap...proximately 0.125" thick, 0.57" wide Rectangular Shape Double Cut Searches for products like these typically include:... read more

Nicholson
$39.56

American pattern axe sharpening file Ideal for sharpening axes and miscellaneous garden tools Rectangular shape Double-cut on one ...side and single-cut on opposite 2 safe edges Length measured exclusive of handle American Pattern Standard cut 8" Carded read more

Nicholson
$4.39 $2.92

Straight-tang chainsaw file is perfect for sharpening the blade of your used chainsaw.

Nicholson
$233.80

• Made to More Exacting Measurements Than American Pattern Files • Used By Tool and Die Makers, Jewelers, Model Makers, Home Craft...sman • Recommended for Those Who Do Superfine Precision Filing • Double Cut, Wide Flat Sides • Flat on 1 Side, Backs Are... read more

Nicholson
$4.39 $4.05

Tighten tension on chain to firmly support cutters when filing. Place file against beveled cutting surface of teeth 20 degree to 4...5 degree with saw. File from inside to outside of cutter. read more

Nicholson
$204.91 $135.36

• Made to More Exacting Measurements Than American Pattern Files • Used Primarily By Jewelers, Die Makers, Watchmakers and Fine To...olmakers • Knurled Handles Country of Origin: Switzerland Coupon Headline: Needle Files File Cut: 0 Length: 6-1/4 in Long... read more

Nicholson
$60.49 $31.03

FILE 14" HAND LA LATHE FI Specially designed for finishing rapid stock removal on lathe workSafe edgesCut faster than regular mill... files and leave smoother finish Cut Type: Smooth CutLength: 14 in, 1 inTooth Pattern: Flat - Single Cut, Edges -... read more

Nicholson
$34.99 $10.28

File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sha...rpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height betwe read more

Nicholson
$55.54 $27.88

FILE EQUALING CUT 2 150MM/6" Used by tool and die makers, jewelers, model makers, and home craftsmanParallel in both width and thi...ckness for entire length Cut Type: 2Length: 6 in, 1 inTooth Pattern: Flat - Double Cut, Edge - Single CutCross Section... read more

Nicholson
$38.99 $9.22

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, c...onvex and flat surfaces. read more

Nicholson
$48.99 $38.20

American pattern flat file Used by machinist, machinery builders, ship and engine builders Also used by repairmen and other who re...quire rapid removal of metal Rectangular in cross section and taper slightly towards point in width Double cut on sides... read more

Nicholson
$51.99 $19.49

Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut file pattern that are nar...row chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, r read more

Nicholson
$55.54 $27.88

FILE EQUALING CUT 2 150MM/6" Used by tool and die makers, jewelers, model makers, and home craftsmanParallel in both width and thi...ckness for entire length Cut Type: 2Length: 6 in, 1 inTooth Pattern: Flat - Double Cut, Edge - Single CutCross Section... read more

Nicholson
$36.99 $9.33

Add this versatile Apex Tool Group, LLC Tools 21701HN 10" Mill Bastard File to your toolbox. It can be used for sharpening mill or... circular saws, as well as draw-filing and finishing metals. This American pattern single-cut file has a rectangular shape... read more

Nicholson
$77.05 $8.19

Add this Apex Tool Group, LLC-Tools 06706N 8" Axe-Sharpening File to your toolkit. It is double-cut on one side and single-cut on ...the opposite. This file tool features an American pattern, and it is also ideal for sharpening all kinds of garden tools.... read more

Nicholson
$284.06 $139.04

• Made to More Exacting Measurements Than American Pattern Files • Rectangular in Shape • Double Cut on 2 Sides Only • Safe Edges ...• Tapered in Thickness • Similar in Shape to Hand Files But Only 2/3 As Wide Country of Origin: Switzerland Coupon... read more

Nicholson
$42.36

• American Pattern Taper File, Slim • Made for Filing Saws with 60 Angle Teeth • Triangular Shape • Single Cut • Edges Set and Cut... for Filing Gullets Between Saw Teeth • Tapers Slightly Towards the Point • In Filing Handsaws, It is Important to Select... read more

Nicholson
$73.27 $39.04

FILE HALF ROUND CUT 2 150MM/6".NICH Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat... and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest) Cut Type: 2Length: 6 in,... read more

Nicholson
$19.49

For filing all types of saws with 60 angle teeth Single cut Edges set and cut for filing between saw teeth 6in With handle Carded ...Material: Metal read more

Nicholson
$20.89

American pattern mill file Used for sharpening mill or circular saws Also used for draw-filing and finish metals Rectangular shape... Ergonomic handle Single cut on sides and edges Two square edges All sizes taper slightly in width American Pattern... read more

Nicholson
$21.59

American pattern flat file Used by machinist, machinery builders, ship and engine builders Also by repairmen and others who requir...e rapid removal of metal Rectangular in cross section and taper slightly towards point in width Double cut on sides and... read more

Nicholson
$19.49

To file circular openings or concave surfaces Tapered slightly towards point Single cut Carded 6in Carded Material: Metal

Nicholson
$21.99

Primarily used to file circular openings or concave surfaces Round shape Single cut file Tapered slightly towards point 8in Carded... Material: Metal Size: 8 Inch. Color: Red. read more

Nicholson
$25.49

American pattern half round file Used on concave, convex and flat surfaces Rounded on one side and flat on opposite Backs are doub...le cut Flat sides of all half-round files are double cut American Pattern Bastard cut 6in Carded Material: Metal Size: 6... read more

Nicholson
$27.99

Rounded on one side, flat on the other Used on convex and concave as well as flat surfaces The flat side of all half round files a...re double cut Bastard cut 8in Carded Material: Metal read more

Nicholson
$21.49

For sharpening mill or circular saws Also for draw filing and finishing metals All sizes tapered slightly in width Two square edge...s, single cut in sides and edges 8in Carded Material: Metal read more

Nicholson
$18.89

American pattern slim taper file Made for filing saws with 60 angle teeth Edges set and cut for filing gullets between saw teeth I...n filing handsaws, it is important to select the right file Ergonomic handle Triangular shape Single cut Tapers slightly... read more

Nicholson
$24.89

American pattern half round file Ergonomic handle Rounded on one side and flat on opposite Backs are double cut Flat sides of all ...half-round files are double cut American Pattern Bastard cut 6in Carded Material: Metal read more

Nicholson
$23.39

American pattern mill file Used for sharpening mill or circular saws Also used for draw-filing and finish metals Rectangular shape... Ergonomic handle Single cut on sides and edges Two square edges All sizes taper slightly in width American Pattern... read more

Nicholson
$18.99

Spiral cut enables more material to be removed with each stroke, reducing amount of strokes to produce keen edge Round shape Spira...l cut Straight tang 2 per card 6in x 5/32in Material: Metal read more

Nicholson
$22.79

To file circular openings or concave surfaces Tapered slightly towards point Single cut 8in Carded Material: Metal Color: Silver.

Nicholson
$19.19

Tungsten point file For dressing distributor points that are tipped with tungsten and iridium Thin rectangular shape Double cut Ch...isel tip of files enters slots or gaps easily American pattern tooth type 5-1/4in Carded Material: Metal read more

Nicholson
$27.99

American pattern flat file Used by machinist, machinery builders, ship and engine builders Also used by repairmen and others who r...equire rapid removal of metal Rectangular in cross section and taper slightly towards point in width Double cut on sides... read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts