Malco Power Equipment & Tools

Refine By
Malco
$88.71

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. Its that ea...sy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and... read more

Malco
$51.81

Durable 7.5 amp motor gives you the power to drill in concrete, steel or wood.Impact rate: 0-44800 BPMDrill speed: 0-2800 RPM120 v...olts, 60 Hz Comes with 360° side handle and depth gauge 6 ft. 11 power cord Weight: 6.35 lbs. SKU:ADIB0064UMIOG read more

Malco
$76.85 $51.21

Setting Hammer, Head Weight 18 Oz, Head Length 5 1/2 In, Blade (1) Width 7/8, Blade (1) Length 2, Blade (2) Width 7/8, Blade (2) L...ength 2 1/4, Head Material One-Piece Alloy Forged Steel, Overall Length 11 3/4 In, One-Piece Alloy Forged Steel With... read more

Malco
$300.90

Type: Crimper Easily attaches to your corded or cordless drill to save time & effort crimping 24 ga (.71mm) to 30 ga (.41mm) galva...nized steel duct, spiral duct, aluminum pipe or black stove pipe. Make fast, easy, precise crimps in large or small round... read more

Malco
$25.99

Light duty tool without grips Makes a single crimp for downsizing aluminum downspouts 8in .56 lbs Carded Material: Metal

Malco
$34.49

Fast, and easy to use Lightweight Handy lock makes tool pocket sized Carbon and steel blades Superior compound leverage mechanism ...Zinc plated steel For use on 0.35in galvanized sheet metal Red grips 1-1/4in x 8in 8 oz Carded Material: Metal read more

Malco
$28.82

Trim Nail Punch with Retaining Clip For easier nailing from any angle or height, Malco offers a Trim Nail Punch with an exclusive,... nail retaining clip feature. Avoid the awkwardness and strain of balancing nails in the nose of the punch or holding back... read more

Malco
$17.42

For installing or servicing heating, air conditioning or refrigeration units. 5/16-inch & 3/16-inch Hex Key Wrench Inserts (option...al) 1/4-inch square drive shanks fit Malco RRW4 and RRW4 Ratchet Wrenches. Facilitates easy ratcheting action for... read more

Malco
$678.12

This general hand tool kit from Malco is great to have on hand.This general hand tool kit includes 30 well-constructed pieces.A ba...g is included for convenient storage and packing. Features Includes: 5" Pipe Crimper, Snap Lock Punch, Hand Notcher, Hand... read more

Malco
$19.16

Drill Clamp, Optional, For Use With G1134813 Shear, Includes Clamp and Mounting Hardware, Package Quantity 1 Features Includes: Cl...amp and Mounting Hardware Item: Drill Clamp Type: Optional read more

Malco
$48.46

Join sheet metal, duct and pipe sections economically. No need for extra hardware. Punches raise a louvered shaped projection on m...etal edge for locking into rolled edge of sheet or piece to be joined. Metal pieces snap together and are fastened... read more

Malco
$81.15

Hog Ring Pliers, With Self-Feed Magazine, Capacity 9 ga. and 7 ga., Ring Size 3/4 In., Overall Length 7 In., Wire Cutter Yes, Hand...le Design Spring Actuated w/Non-Slip Rubber Inserts, Material Steel, Features Removeable Magazine Holds 50 Hog Ring... read more

Malco
$468.73

This general hand tool kit from Malco is sure to become your go-to for taking on even the most challenging jobs.This general hand ...tool kit includes 16 well-constructed pieces.A bag is included for convenient storage and packing. Features Includes: 5"... read more

Malco
$32.82

Type: Ratchet Wrench For installing or servicing heating, air conditioning or refrigeration units. Facilitates easy ratcheting act...ion for servicing hard to access valves common in air condition and refrigeration condensing units. 1-5/8" long. For... read more

Malco
$19.09

Product Description Mini Size Trim Nail Punch is pocket size and constructed of hardened steel, the tool will hold and install sta...ndard 1-1/4-inch (31.2 mm) trim nails. Small size allows easy access to recesses of formed trim pieces. Hex collar... read more

Malco
$32.34

DescriptionsThe TNP2R includes:Malco Model TNP2R Trim Nail PunchHighlights: Provides proper setting depth for nailing soffet fasci...a and trim without denting surfaceNew retaining clip holds nail securelyNew slimmer nose to allow access in tight... read more

Malco
$37.05

The Malco Rrw3 is a 4 Size Ratchet Wrench. This size 4 ratchet wrench is designed to facilitate an easy ratcheting action for serv...icing hard to reach valves common in air conditioning and refrigeration condensing units. read more

Malco
$33.01

Hog Ring Pliers, Compact, Capacity 11 ga., Ring Size 5/8 In., 3/4 In., Overall Length 7 In., Wire Cutter Yes, Handle Design Spring... Actuated w/Non-slip Rubber Inserts, Material Steel, Features (2) Built-In Wire Cutters Features Capacity: 11 ga.... read more

Malco
$31.49

Fiber cement siding overlap gauges Permits 1 person application of panels Two gauges support entire length of panel precision grou...nd tip assures gauge will grip behind siding plank Will not mar pre-painted siding Tempered spring steel construction 1... read more

Malco
$19.09

Combines the comfort and added leverage of an easy to grasp straight handle with the smooth unlocking motion of a burr free hook T...he blade is angled from the bottom plane of the handle and allows the user to keep the wrist straight while keeping... read more

Malco
$27.49

Fiber cement facing gauge More accurate and easier to use than homemade wood preacher blocks Easily snaps into desired exposure po...sition without use of tools or fasteners Easily held with one hand while steadying new plank for nailing May be used with... read more

Malco
$26.50 $22.08

For Installing Or Servicing Heating, Air Conditioning Or Refrigeration Units.

Malco
$40.19

This legendary fencing pliers design is available in a highly maneuverable 8-Inch (203 mm) length, to go wherever the work is. The... versatile design features three serrated jaw areas for gripping, pulling and tying fence wire. Also, three built-Inch... read more

Malco
$121.00 $105.00

By pressing the handles together, this tool will first punch a rectangular hole in the two pieces to be joined, then rolls the cut... strip back at the top and bottom of hole. read more

Malco
$18.88

This versatile, compact and lightweight Offset Ratcheting Box Wrench provides easy fastener access and fast, two-way ratcheting ac...tion with an effortless handle-swing motion. Finger switches are easily accessible to change ratcheting direction. It is ideal for installing or removing fasteners at chain link fence hook-up points. A 25 degree offset design maintains clearance between fingers and chain link fabric when fastening fence hardware such as tension bands, brace bands and rail end cups. The 12-point box heads, at each end of the wrench, grasp standard U.S. 1/2 inch and 9/16 inch hex fasteners from multiple angles. The box head keeps wrench in contact with the fastener for superior control. And through-hole socket openings accommodate any fastener length! Designed for long service life, this Offset Ratcheting Box Wrench exceeds ASME minimum torque requirements. Hardened socket openings and protective nickel chrome plating compliment a solid plastic core sandwiched between the tool's 1/8 inch (3.18 mm) steel plates to ensure that the ratcheting mechanism will function in harsh cold, wet or dirty working conditions. read more

Malco
$17.67

One piece construction of weather-resistant, urethane compound ensures long service life. steel shot inside head absorbs impact to... prevent recoil. Excellent for working copper, other soft metals and hardened sheet steel including ductwork and auto body panels. Flanged handle butt grip for a more secure grip. read more

Malco
$118.45 $115.98

Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile mo...del TSMD TurboShear Drill Attachment fits a corded or cordless drill you already own. A compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operation. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360Degree and set in any position for optimum tool clearance. The blades of Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90Degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams! And you can easily disengage Malco Double-Cut Blades from the cutting path or quickly re-engaged to continue cutting. The long lasting carbon steel blades are also easily replaced on the job. read more

Malco
$31.24

This is a 6.3 mm replacement punch and die kit for the Malco Products HP18KR Hole Punch. It is easily interchangeable with the Mal...co 3.6 and 4.1 mm punch and dies. All are supplied with the HP18KR. Use on window extrusions, metal ductwork or sheet stock. read more

Malco
$31.24

This is a 4.1 mm replacement punch and die kit for the Malco Products HP18KR Hole Punch. It is easily interchangeable with the Mal...co 3.6 and 6.3 mm punch and dies. All are supplied with the HP18KR. Use on window extrusions, metal ductwork or sheet stock. read more

Malco
$31.24

This is a 3/16" replacement punch and die kit for the Malco Products HP18K Hole Punch. It is easily interchangeable with the Malco... 1/8" punch and dies. Both are supplied with the HP18K. Use on window extrusions, metal ductwork or sheet stock. read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts