Makita Hand Tools

Refine By
Makita
$1894.99

Anti Vibration Technology features a counterbalance system that reduces the tool's vibration level to only 8 m/s2 for unmatched co...mfort. Accepts Bits in. 1 1/8 Hex Shank, Amps 15, Blows Per Minute BPM 1,100, Impact Energy ft. lbs. 46.5. Lowest noise... read more

Makita
$170.71

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. DR...ILL ROTARY HMMR 5/16IN 7A Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only,... read more

Makita
$171.92

The TW0200 1/2 in. Electric Impact Wrench provides strong torque (150 ft.-lbs) and an effective impact system (2,200 IPM) for dema...nding jobs. The 3.3-Amp motor has an efficient impact system which creates less vibration and minimizes operator fatigue.... read more

Makita
$259.99

Technical Specification Rotary Hammer Product Grouping Rotary Hammer Kits Item Rotary Hammer Kit Rotary Hammer Chuck Type SDS Plus... Chuck Type SDS Plus No Load RPM 0 to 1100 Blows per Minute 0 to 4500 Amps 7.0 Voltage 120 Solid Bit Capacity 1-1/8 Core... read more

Makita
$19.08

Product DescriptionMakita D-36522 Scaling Chisel 3in x 12in General Purpose SDS-MAX Bit

Makita
$817.78

Impact Wrench, Drive Size: 1in, Max. Torque: 738 ft.-lb., Blows per Minute: 0 to 1500, No Load RPM: 0 to 1400, Amps: 12, Tool Leng...th: 15in, Tool Weight: 18.5 lb., Anvil Type: Detent Pin, Voltage: 120VAC, Handle Type: Pistol Grip, Features: Rubber... read more

Makita
$452.34

Rotary Hammer Product Grouping: Rotary Hammer Kits, Item: Rotary Hammer Kit, Rotary Hammer Chuck Type: SDS Plus, Chuck Type: SDS P...lus, No Load RPM: 315 to 630, Blows per Minute: 1650 to 3300, Amps: 8.2, Voltage: 120, Solid Bit Capacity: 1-1/4, Core Bit... read more

Makita
$169.97

Technical Specification Item Impact Wrench Drive Size 1/2 Max. Torque 260 ft.-lb. Blows per Minute 0 to 2000 No Load RPM 0 to 2000... Amps 3.5 Tool Length 11-1/8 Tool Weight 6.6 lb. Anvil Type Detent Pin Corded/Cordless Corded Features Rocker Switch,... read more

Makita
$222.10

Makita HR2621 1 Rotary Hammer D-Handle. Makita's Anti-Vibration Technology (AVT) is an internal counterbalance system that greatly... reduces vibration by moving a counterweight in the opposite direction of drive piston Integrated damper spring at the... read more

Makita
$1449.00

Includes 70 lb. Breaker Hammer - HM1810-R, Hex Wrench #5 - 783203-8, Operating Manual

Makita
$116.31

Hammer Drill, Chuck Size: 1/2in, No Load RPM: 0 to 1200/0 to 2900, Blows per Minute: 0 to 24,000/0 to 58,000, Cutting Capacity: 3/...4, Reversing: Yes, Drill Chuck Type: Keyed, Features: 2 Mode, w/Case, Tool Length: 14-1/4in, Tool Weight: 5.6 lb.,... read more

Makita
$1830.05

Makita's 6922NB 3/4 in. Shear Wrench features: Anti-slipping mechanism: tool won't start until inner sleeve engages with bolt tip.... Handy tip lever for ejecting sheared tips. Compact and light weight. Rubber bumper for tool body protection. Bolt size:... read more

Makita
$1073.46

Makita HM1500B Specifications:Blows per minute 1300 AMPS (115V) 13.5 Bit type 1-1/8in Hex shankMakita HM1500B Includes:Steel tool ...case (182715-2)Makita HM1500B Features:Innovative pneumatic compression system automatically adjusts air in the cylinder... read more

Makita
$18.55

Makita's SDS-MAX, 12 in. x 1-1/2 in. Scaling Chisel is manufactured using state-of-the-art technology, CNC machined and forged fro...m industrial-grade alloy material for increased durability. Shot-peened for added strength and increased surface hardness,... read more

Makita
$31.50

Makita's SDS-MAX, 12 in. Scraping Chisel is manufactured using state-of-the-art technology, CNC machined and forged from industria...l-grade alloy material for increased durability. Shot-peened for added strength and increased surface hardness, the... read more

Makita
$19.99

Makita's SDS-MAX, 12 in. x 3 in. Scaling Chisel is manufactured using state-of-the-art technology, CNC machined and forged from in...dustrial-grade alloy material for increased durability. Shot-peened for added strength and increased surface hardness, the... read more

Makita
$25.05

Makita's SDS-MAX, 12 in. x 2 in. Scaling Chisel is manufactured using state-of-the-art technology, CNC machined and forged from in...dustrial-grade alloy material for increased durability. Shot-peened for added strength and increased surface hardness, the... read more

Makita
$16.00

Makita's SDS-MAX, 12 in. Flat Chisel is manufactured using state-of-the-art technology, CNC machined and forged from industrial-gr...ade alloy material for increased durability. Shot-peened for added strength and increased surface hardness, the 751228-A... read more

Makita
$259.00

This Makita 1-1/8 in. Rotary Hammer Drill can work in any of 3 modes of operation: rotation only, hammering with rotation and hamm...ering only. The drill's hammering action is disengaged when the drill is idle, which reduces fatigue. The 6.7 Amp motor... read more

Makita
$26.97

Makita demolition steel is constructed of high quality steel for more efficient work and long life. The steel is hardened for adde...d durability in a variety of demolition applications. A coat is added to each bit to help prevent corrosion. read more

Makita
$6.43

Makita high quality hammer grease is engineered to ensure peak performance of your rotary and demolition hammer. It's formulated t...o keep the hammer lubricated for smooth operation in demanding applications and job site conditions. Use as part of the... read more

Makita
$107.99

Makita LD050P Laser Distance Measure Meter 50m Rangefinder

Makita
$259.99

Technical Specification Rotary Hammer Product Grouping Rotary Hammer Kits Item Rotary Hammer Kit Rotary Hammer Chuck Type SDS Plus... Chuck Type SDS Plus No Load RPM 0 to 1100 Blows per Minute 0 to 4500 Amps 7.0 Voltage 120 Solid Bit Capacity 1-1/8 Core... read more

Makita
$198.99

All-metal hammer casing to withstand all environments * 0 - 3,000 impacts per minute for maximum efficiency * High max torque (110... ft.lbs.) for demanding applications * Compact length for easy handling and total operator control All-metal hammer casing to withstand all environments * 0 - 3,000 impacts per minute for maximum efficiency * High max torque (110 ft.lbs.) for demanding applications * Compact length for easy handling and total operator control read more

Makita
$178.99

L.E.D. light illuminates drilling surface for more accurate work * Dual operation mode; rotation only and hammering with rotation ...* Variable speed (0-1,500 RPM) and (0-5,000 BPM) for demanding applications L.E.D. light illuminates drilling surface for more accurate work * Dual operation mode; rotation only and hammering with rotation * Variable speed (0-1,500 RPM) and (0-5,000 BPM) for demanding applications read more

Makita
$249.00

L.E.D. Light Illuminates Drilling Surface for More Accurate Work * 3-Mode Operation: Rotation Only & Hammering with Rotation and H...ammering Only * Extended service life of carbon brushes * Recessed Lock-on button for continuous use L.E.D. Light Illuminates Drilling Surface for More Accurate Work * 3-Mode Operation: Rotation Only & Hammering with Rotation and Hammering Only * Extended service life of carbon brushes * Recessed Lock-on button for continuous use read more

Makita
$399.99

Compact and lightweight for maximum control * Soft rubber grip side handle minimizes vibration and swivels 360 Degree for operator... convenience * Unique anti-vibration spring is postitioned between tool body and rear Compact and lightweight for maximum control * Soft rubber grip side handle minimizes vibration and swivels 360 Degree for operator convenience * Unique anti-vibration spring is postitioned between tool body and rear read more

Makita
$1809.99

Anti-slipping mechanism: tool won?t start until inner sleeve engages with bolt tip * Handy tip lever for ejecting sheared tips * C...ompact and light weight Anti-slipping mechanism: tool won?t start until inner sleeve engages with bolt tip * Handy tip lever for ejecting sheared tips * Compact and light weight read more

Makita
$104.99

LD050P Laser Distance Measure Meter 50m Rangefinder LD050P Laser Distance Measure Meter 50m Rangefinder

Makita
$179.00

HR2641 1" AVT Rotary Hammer, SDS-PLUS, 3-mode, var. spd., case (D-handle) HR2641 1" AVT Rotary Hammer, SDS-PLUS, 3-mode, var. spd...., case (D-handle) read more

Makita
$92.53

The Makita Digging Chisel is 3 in. wide x 22-1/2 in. long. The chisel is utilized for digging deep into hard ground and asphalt. T...he Makita Digging Chisel is for use with Makita and other brand 1-1/8 in. hex demolition and breaker hammers. read more

Makita
$99.99

Laser distance measures offer a fast and convenient solution to distance measuring applications that would otherwise require multi...ple steps to achieve. The Makita Laser Distance Measure, 164 ft. (model LD050P) is engineered to make tape measuring... read more

Makita
$159.99

Laser distance measures offer a fast and convenient solution to distance measuring applications that would otherwise require multi...ple steps to achieve. The Makita Laser Distance Measure, 262 ft. (model LD080P) is engineered to make tape measuring... read more

Makita
$1099.99

Anti-Vibration Technology (AVT), Makita's exclusive counterbalance system, reduces vibration Anti-Vibration Technology (AVT), Maki...ta's exclusive counterbalance system, reduces vibration read more

Makita
$134.99

The Makita premium hammer cart (T-03224) gives contractors convenient and secure transportation for a Breaker hammer and bits. The... large, rugged semi-pneumatic wheels role smoothly over rough terrain. At the end of the day, the cart goes back into the Truck more easily with the Stair Climber rails. The rails are also engineered for more convenient lifting up stairs, curbs, and other elevated surfaces. For secure transport, the adjustable strap keeps the hammer securely fastened to the cart, and bit retainers firmly hold up to four 1-1/8" demolition steel bits. The Makita premium hammer cart (T-03224) gives contractors convenient and secure transportation for a Breaker hammer and bits. The large, rugged semi-pneumatic wheels role smoothly over rough terrain. At the end of the day, the cart goes back into the Truck more easily with the Stair Climber rails. The rails are also engineered for more convenient lifting up stairs, curbs, and oth read more

Makita
$177.99

11/16 in. Rotary Hammer with L.E.D. Light - HR1830F. Side Handle - 1548425. Depth Gauge - 4154869. Carrying Case - 8246505. Dual o...peration mode; rotation only and hammering with rotation. Variable speed (0 - 1,500 RPM) and (0 - 5,000 BPM) for demanding applications. "No hammering when idling" function ensures extra-low vibration under no load. Soft-grip side handle with elastomer for better comfort. Ideal for overhead applications and working in confined areas. Carbon brushes for extended service life. Ergonomic and well-balanced design (3.7 lbs.). Recessed lock-on button for continuous use read more

Makita
$179.99

1 in. SDS Rotary Hammer - HR2475. Side handle - 158057-6. Depth guage - 324219-0. Plastic tool case - 824695-3. 3 mode operation "...rotation only" hammering with rotation or hammering only " for multiple applications. Ergonomic D shaped handle with rubberized soft grip for increased comfort and control. One touch sliding chuck allows for quick bit changes. Buiild-in torque limiter ensures stable torque contraol. No hammering when idling function ensures extra-low vibration under no load. Extended service life on carbon brushes. Recessed Loco-on button for continous use. Reversed mode for user convenience. 40 different chisel angle setting for increased convenience read more

Makita
$109.99

3/4 in. Hammer Drill - HP2050. Side Handle - 152521-9. Depth Gauge - 324219-0. Chuck Key - 763430-3. Tool Case - 824650-5. Operati...ng Manual. Positive Stop Mode Selector prevents accidental mode disengagement. Built-in Torque Limiter stops bit rotation when hitting reinforcement to prevent kick-back. Large trigger switch and 360 degree swivel side handle for added comfort. Recessed lock-on button for continuous use. Ball bearing construction for longer motor life. Ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue. Air vent holes supply required ventilation while protecting motor from dust and dirt. Includes tool case read more

Makita
$144.99

1 in. SDS-plus Rotary Hammer w/ D-Handle - HR2455-R. Side Handle - 134943-5. Depth Gauge - 324219-0. Tool Case - 824695-3. Operati...ng Manual. 1 in. SDS-plus Rotary Hammer w/ D-Handle - HR2455-R. Side Handle - 134943-5. Depth Gauge - 324219-0. Tool Case - 824695-3. Operating Manual read more

Makita
$99.99

5/8 in. Hammer Drill - HP1640. Drill Chuck. Chuck Key. Side Handle. Depth Gauge. Lightweight (4.0 lbs.) with large capacity drilli...ng up to 5/8 in. in concrete. Dual Mode Operation: "Rotation Only" and "Hammering with Rotation". Ergonomic handle with rubberized soft grip for increased comfort and control. Recessed lock-on button for continuous use. All ball bearing construction for longer tool life. Extended service life of carbon brushes read more

Makita
$31.00 $19.38

Makita 751226A Specifications: 3" Scale Chisel 3/4" Hex, Wide ChiselMakita 751226A Features: Wide Chisel, ideal for chipping dried... concrete with two distinct cutting angles For use with Makita HM1211B and D25940K read more

Makita
$69.99

1/2 in. Hammer Drill - HP2050-R. Side Handle - 152521-9. Depth Gauge - 324219-0. Chuck Key - 763430-3. Tool Case - 824650-5. Opera...ting Manual. Positive Stop Mode Selector prevents accidental mode disengagement. Built-in Torque Limiter stops bit rotation when hitting reinforcement to prevent kick-back. Large trigger switch and 360 degrees swivel side handle for added comfort. Recessed lock-on button for continuous use. Ball bearing construction for longer motor life. Ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue. Air vent holes supply required ventilation while protecting motor from dust and dirt. Includes tool case read more

Makita
$55.60 $38.96

Makita A-80597 Specifications: Head Size: 1-3/8" Shank: Makita Large Length: 16" Makita A-80597 Features: Fits Makita HM1500 & 130...3 & Milwaukee 5338 (both sold separately) Comes in reusable plastic case Replaces part #7980148 read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts