Tool Racks

Refine By
Loma Living
$110.00

Modern wall-mounted bike storage. Your bike’s top tube rests securely on a built in notch. Use the shelf space for your helmet, lo...ck or accessories. The modern/minimalist design is super clean and a great match for the space constrained and design conscious cyclist.Crafted of high quality Mahogany and finished with a clear coat to show off the beautiful wood. SizeWall plate: ~7”x7” (18 cm by 18 cm), Shelf: ~9”x~9” (23 cm by 23 cm), Notch: ~9” from wall (23 cm). Perfect fit for road bikes, fixed gear and track bikes. Handle bars that extend more than 9” (23 cm) from center will have bars and wheel hang slightly turned away from wall. InstallationHardware is included. All it needs are two screws into a wall stud or heavy duty wall anchor and it slips right on. Recommended weight limit of around 30 pounds. read more

See at Houzz
Itw
$24.99

Bike rack; Folds flat when not in use; Includes a shelf for a helmet, lock, or accessory storage; Easy installation with provided ...hardware; Solid steel; Coated with a durable epoxy finish for rust resistance; Holds 2 bikes; 21" x 13" x 14" read more

See at Houzz
Proslat
$96.99

The Proslat tire storage rack is a well-engineered solution to save space and contain your off-season tires and rims. Hefty enough... to hold a set of 4 tires & mags up to 20", this convenient and safe storage wall-mount tire rack is constructed of heavy-duty steel and has been load tested to handle weights up to 350lb. (136.1kg). This rack can be installed by bolting directly into your wall studs or may be hung from a Proslat wall panel (sold separately). Measures 48" W x 28" Hx 28" D High-load bearing steel for years of durability, powder coated in charcoal granite finish. Supports up to 350 lbs. when mounted directly to studs. Will hold a set of 4 - 20" Tires & mags-up to 20". Requires assembly. Mounts directly to your wall or use with Proslat wall panels. Measures 48" W x 28" Hx 28" D. High-load bearing steel for years of durability, powder coated in charcoal granite finish. Supports up to 350 lbs. when mounted directly to studs. Will hold a set of 4 - 20" Tires & mags-up to 20". Requires assembly. Mounts directly to your wall or use with Proslat wall panels. read more

See at Houzz
Rack & Cycle
$178.99

Wall mounted walnut wood indoor bicycle rack designed to support one bicycle by its saddle off of the groundThe rack has two pegs ...for hanging your helmet, lock, or what have you. Each rack has the Rack & Cycle logo laser engraved into it and is coated with a protective wood finish. The slot opening that supports the saddle is 2" wide. The rack and toggle supporting system is engineered to support a bike of any weight 10" off of the wall accommodating fairly wide handle bars without a problem. If handle bar clearance is of concern to you you can measure the distance from your top frame tube to the end of your handle bars to see if 10" off of the wall will give you enough room. In almost all case this distance should be sufficient.Mounting instructions are included along with the user friendly Strap-Toggle mounting brackets. Although, a stud finder, drill, and level can facilitate the mounting process they are not necessary. The self drilling strap-toggle mounting system is designed to be mounted into dry wall, plaster, tile, or hollow block (not a stud) and can be accomplished with ONLY A SCREW DRIVER! If your only option for your bracket is into a stud, a stud screw can be used, but we would prefer one of the supports be a Strap-Toggle. If you plan to mount the rack on a masonry wall, a masonry wall mounting kit can be acquired at your local hardware store. read more

See at Houzz
Torin
$21.95 $21.19

Keep your tools organized and easily accessible with the Torin Magnetic Screwdriver Holder. Features high powered magnets that hol...d up to 15 screwdrivers in a compact, efficient design. Magnetic backing secures the organizer onto most metal surfaces. read more

See at Amazon
Monkey Bar Storage
$59.99 $50.99

The Small Snowshoe Rack by Monkey Bars allows you to store up to 3 pairs of snowshoes of various sizes and styles. This snowshoe r...ack can be installed in about 15 minutes with 4 screws mounted into studs 24" to 32" apart. The Small Snowshoe Rack is great for the garage, shop, shed, closet, or storage room. The Small Snowshoe Rack is made of powder coated industrial steel. Each hook has a polyurethane coating to hold gear tightly and protect it while being stored. Product Features:Installs in 15 min.Steel Components are powder coatedHolds 3 Snow ShoesHooks slide on bar for easy adjustabilityLifetime Warranty read more

See at Houzz
Loma Living
$110.00

Modern wall-mounted bike storage. Your bike’s top tube rests securely on a built in notch. Use the shelf space for your helmet, lo...ck or accessories. The modern/minimalist design is super clean and a great match for the space constrained and design conscious cyclist.Crafted of high quality Mahogany and finished with a clear coat to show off the beautiful wood. SizeWall plate: ~7”x7” (18 cm by 18 cm), Shelf: ~9”x~9” (23 cm by 23 cm), Notch: ~9” from wall (23 cm). Perfect fit for road bikes, fixed gear and track bikes. Handle bars that extend more than 9” (23 cm) from center will have bars and wheel hang slightly turned away from wall. InstallationHardware is included. All it needs are two screws into a wall stud or heavy duty wall anchor and it slips right on. Recommended weight limit of around 30 pounds. read more

See at Houzz
Rack & Cycle
$498.99

A wall mounted walnut indoor bicycle storage solution is designed as a piece of functional furniture for artistically protecting a...nd displaying two of your favorite bicycles. Although, this rack is designed to support two bicycles by their frames off of the ground, bicycles can be hung by their saddle as well. The arms are adjustable, making it possible to accommodate bicycles with different frame configurations. On the rack you will find two pegs for hanging your helmet, lock or what have you. The walnut rack is coated with a protective wood finish.The rack and toggle supporting system is engineered to support two bikes of any weight 13" off of the wall accommodating the widest of handle bars without a problem. If this is of concern to you you can measure the distance from your top frame tube to the end of your handle bars to see if 13" off of the wall will give you enough room. In almost all case this distance should be sufficient.In order to protect the wood during shipping, some assembly is required and instructions are included. The rack will come in eight pieces requiring four screws (included) to be used to secure the cross brasses to the long vertical supports. Eight sets of bolts, washers, and screws are included to secure the arms to the vertical supports. All in all, assembly and mounting can be accomplished in very little time. Felt strips are included as an optional protective layer between your bike frame and the wooden rack.Mounting instructions are included along with the user friendly Strap-Toggle mounting brackets. Although, a stud finder, drill, and level can facilitate the mounting process they are not necessary. The self drilling strap-toggle mounting system is designed to be mounted into dry wall, plaster, tile, or hollow block (not a stud) and can be accomplished with ONLY A SCREW DRIVER! If your only option for your bracket is into a stud, a stud screw can be used, but we would prefer one of the supports be a Strap-Toggle. If you plan to mount the rack on a masonry wall, a masonry wall mounting kit can be acquired at your local hardware store. read more

See at Houzz
Rack & Cycle
$208.99

Wall mounted bamboo wood indoor bicycle rack designed to support one bicycle by its saddle off of the groundThe rack has two pegs ...for hanging your helmet, lock, or what have you. Each rack has the Rack & Cycle logo laser engraved into it and is coated with a protective wood finish. The slot opening that supports the saddle is 2" wide. The rack and toggle supporting system is engineered to support a bike of any weight 10" off of the wall accommodating fairly wide handle bars without a problem. If handle bar clearance is of concern to you you can measure the distance from your top frame tube to the end of your handle bars to see if 10" off of the wall will give you enough room. In almost all case this distance should be sufficient.Mounting instructions are included along with the user friendly Strap-Toggle mounting brackets. Although, a stud finder, drill, and level can facilitate the mounting process they are not necessary. The self drilling strap-toggle mounting system is designed to be mounted into dry wall, plaster, tile, or hollow block (not a stud) and can be accomplished with ONLY A SCREW DRIVER! If your only option for your bracket is into a stud, a stud screw can be used, but we would prefer one of the supports be a Strap-Toggle. If you plan to mount the rack on a masonry wall, a masonry wall mounting kit can be acquired at your local hardware store. read more

See at Houzz
$64.99 $53.84

Tools are inserted from the bottom and held in place by strong rubber grips. Equipped with hooks on the front to hang up smaller t...ools. Open top offers flexibility to hang rack at the height that is right for you; attach to wall using dowels. Height: 3 1/2"; Width: 36"; Depth: 3 1/2"; Color(s): Aluminum/Green. read more

Airhead
$41.93

Wakeboard & skis not included. Eliminate garage, basement & boathouse clutter. Simple & affordable solution for storing kayaks, wa...ter skis, snow skis, wakeboards, snowboards, surfboards, garden tools, lumber & other bulky items. Saves valuable floor space & creates easy access. Hang it from a wall or ceiling with the steel hooks provided. 8 Pair adjustable rungs outfitted with 14 plastic side release buckles. It takes only a few minutes to set up & no tools required. Made of durable polypropylene webbing. Water Sports Safety Warning. Warranty Information. read more

See at Houzz
TRINITY
$193.99

Steel rack structure with a protective matte black powder coated finish(64) orange bins: 3.75"W x 5.75"D x 2.75"H(30) gray bins: 5....25"W x 8.5"D x 5"HWeight capacity on wheels: 330 lb total3" swivel casters - (2) locking, (2) non-lockingTRINITY's mobile bin rack is versatile and can be used in any garage, store, or workshop. The bin rack is dual-sided which allows for maximum storage space, and 94 bins. read more

See at Houzz
Whitmor
$35.99

A perfect solution for your traveling, the deluxe luggage rack ensures good storage for your luggage; Keeps luggage off the floor;... Strong metal construction; Durable webbed section for holding suitcase; Chrome; read more

See at Houzz
OTC
$169.95 $103.49

The OTC 7485 is a great time saving tool. Now adjustments are possible with the linkage component or pipe completely attached on b...oth ends. When limited by tight access, or rod ends that won't budge, this tool will provide a solution. In fact, it is such a proven time-saver, it will become your first choice when adjusting linkage rods or piping. Durable construction and excellent quality make the OTC7485 Locking Collar Rack Wrench a tool you can trust for years and years. Backed by OTC's Lifetime Warranty against defects in material and workmanship. Service steering linkage "in place" with the handy OTC 7485 - Locking Collar Rack Wrench. Simply remove one pin and place open collar around tie-rod end. Close collar and replace pin to lock around the component. Use with 1/2" drive tools such as ratchet, or breaker bar to adjust as required. No need to disconnect linkage for adjusting tool placement. The OTC 7485 Locking Collar Rack Wrench is designed to work with all component connections in place. Sturdy construction of high quality tool steel for a lifetime of use. Multiple applications - from steering linkage, wheel alignment, small diameter exhaust and general pipe adjustment. Use with component diameters of 1" to 1-7/8" (25.4mm to 47.6mm). read more

See at Amazon
Channellock
$44.89

6-Piece Ratcheting Wrench Set SAE On Rack. Handy storage rack. SAE sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8-Inch. UBO Online Shop is... a manufacturer and trader specialized in the research, development and production of electric and Children’s Toys. We are... read more

See at Walmart
Channellock
$42.29

6-Piece Ratcheting Wrench Set Metric On Rack. Handy storage rack. Metric Sizes: 8, 10, 12, 13, 14, 15mm. UBO Online Shop is a manu...facturer and trader specialized in the research, development and production of electric and Children’s Toys. We are... read more

See at Walmart
OTC
$169.99 $117.14

About Zoro | Shop Zoro | Contact UsCollar Rack Wrench, Locking, Length (In.) 9-5/16, Material Steel, For Steering Linkage, Wheel A...lignment, Small Diameter Exhaust, General Pipe Adjustment, For Use With Use with Component Diameters of 1 In. to 1-7/8... read more

See at Walmart
$28.50 $24.50

Performance Tool Combination Wrench Set, 22 Pieces, Includes: 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in,... 3/4 in, 13/16 in and 7/8 in SAE and 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm Metric Wrenches, Steel, Polished Chrome read more

$7.29 $5.85

Use with Presto cookers and canners to keep food out of cooking liquid, prevent intermingling of flavors, and keep jars off bottom... of unit while canning. read more

Enclume
$224.36

These racks can keep cookware, cookbooks and other necessities at your fingertips. The arms can be rotated to support rack from th...e bottom for a different look or to accommodate space needs. read more

See at Amazon
ABN
$14.89

Shock Adjuster Spanner Wrench, Designed for use on the majority of street, off-road, and ATVs with single shocks. Constructed from... high strength steel for extra durability. Fits 68mm and 87mm lock rings with an 8mm notch. Easily adjust your shocks,... read more

See at Walmart
Rubbermaid
$46.99 $43.99

Keep all of your tools organized in one place with the Rubbermaid Deluxe Tool Tower Rack. This tool storage organizer has enough s...pace to store up to 40 tools, including long-handled garden tools, brooms, shovels and more. Front clips allow head-down storage and ensures stability. For easy transport, four castors help move tools to where you need them. No tools needed for assembly. read more

See at Amazon
SCY
$24.22

M&M Merchandisers provides an exclusive range of consumer electronics, music instruments and accessories, DJ and lighting, sportin...g goods, tools and much more. We strive to exceed your expectations with the highest level of product knowledge and unique... read more

See at Jet
OTC
$128.68

Collar Rack Wrench, Locking, Length (In.) 95/16, Material Steel, For Steering Linkage, Wheel Alignment, Small Diameter Exhaust, Ge...neral Pipe Adjustment, For Use With Use with Component Diameters of 1 In. to 17/8 In., Includes Pin Size: Large. read more

See at Jet
EasiTool
$11.00

About EasiTool: EasiTool is a big global supplier of daily household items and hotel supplies, we are specialized in daily toiletr...ies, like towel rack, towel bar, towel hanger, towel holder and towel organizer, etc. Technical specification: Name: Super suction towel bar towel rack, material: Plastic and metal, size: 18.11 x 16.54 x 7.87 x 4.72 inches/46cm x 42cm x 20cm x 12cm, weight: 0.77lbs/350g. 1. No holes are required: There are 2 super vacuum suction chucks on the two sides of the towel rack that can firmly sucked on the wall, it can be used on any smooth surface. 2. Multifunction design: There are 4 stainless steel bars, in addition to hanging towels, they can be installed as a shelf that you can put some toiletries on it . 3. Durable: This towel shelf is made of high-end ABS and stainless steel, it is high quality and durable. 4. Size: 18.11 x 16.54 x 7.87 x 4.72 inches/46cm x 42cm x 20cm x 12cm, weight: 0.77lbs/350g. 5. Characteristic: This shelf is moisture-proof, waterproof and seamless adsorption, repeated use, will not rust, you can use it in your bedroom, dining room, kitchen, toilet or cars. Notice: Due to different measurement tools, 1-2cm error is a reasonable range and due to the computer resolution difference, the color may be a little bit different, please understand. Package including: 1 set x towel rack. read more

See at Amazon
$7.29 $5.67

Use with Presto cookers and canners to keep food out of cooking liquid, prevent intermingling of flavors, and keep jars off bottom... of unit while canning. read more

Hansen Global
$9.17

HA5300 Features: -Made of flexible and durable Polypropylene PlasticIncludes Peel off numbers for SAE and Metric. Label tray to fi...t your needs. Numbers range from 6mm to 20mm or 1/8" to 1" SAE.. -An organized system for storing wrenches - standard or metric. -Patented gripping system holds your wrenches firmly. -Shows at a glance when a wrench is missing. Product Type: -Wrench Holder. Color: -Blue. Material: -Plastic. Unit of Measure: -Metric/SAE. Dimensions: Overall Height - Top to Bottom: -1 Inches. Overall Width - Side to Side: -6 Inches. Overall Depth - Front to Back: -12 Inches. Overall Product Weight: -0.23 Pounds. read more

See at Amazon
Lisle
$19.95

Organize your tool box drawer. Pliers/Wrench Rack is constructed out of plastic and will hold up to 13 tools. There are two differ...ent size of slots to accommodate all sizes of tools. The front edge also has indentions to hold tools upright. See 40460 for black. read more

See at Amazon
Enclume
$293.20

These racks can keep cookware, cookbooks and other necessities at your fingertips. The arms can be rotated to support rack from th...e bottom for a different look or to accommodate space needs. read more

See at Amazon
Pulaski
$1498.00

The Hillsville 21532 44 Wine Rack Curio is a unique display cabinet that doubles a curio and wine rack With a stemware holder four... adjustable shelves removeable wine racks and four 3-way touch LED lights there39s nothing this piece doesnt have It39s ... read more

Lisle
$19.95 $13.67

Organize your tool box drawer. Pliers/Wrench Rack is constructed out of plastic and will hold up to 13 tools. There are two differ...ent size of slots to accommodate all sizes of tools. The front edge also has indentions to hold tools upright. See 40490 for red. read more

See at Amazon
$8.49 $6.88

Organizer for stick goods along with a hook rack for accessories. ABS plastic with a strong adhesive backing or screw holes for mo...unting. Screws included. 3" H. x 11-1/4" W. x 1-1/8" D. White. 1 per card. read more

Wilmar
$15.89

Performance Tool 11-piece combination wrench set.ÿ Includesÿmost commonÿwrench sizes: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.... Fully polished chrome vanadium steel construction Handy storage sleeve with convenientÿhandle SAEÿsetÿalso available... read more

See at Jet
$7.84 $4.75

Toolbasix Screwdriver Set, 6 Piece, Includes: 3/16 x 4 in, 1/4 x 6 in, 1/4 x 1-1/2 in Slotted, NO 1 x 4 in, NO 2 x 4 in, NO 2 x 1-...1/2 in Phillips and Tool Holder, Chrome Vanadium Steel, Chrome Plated read more

Hansen Global
$6.35 $6.20

Sizes marked on tabs for instant identification Patented spring tabs keep wrenches in place Made of tough Polypropylene plastic Lo...w profile fits in 2 inch deep toolbox drawer Lifetime Warranty - Made in the U.S.A. Hansen Global’s Quik-Pik wrench racks organize wrenches while the clear labeling makes sizes easy to grab and go. Each tray pad printed with the following wrench sizes: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" and 15/16". read more

See at Amazon
Presa
$15.99

*Ideal to use for ceiling storage of bicycles, lawn furniture, and garden hoses*Soft non-marring, non-slip coated finish to protec...t surfaces*Simple and easy to install with 105 pounds maximum capacity*Heavy duty galvanized steel construction for durability*Set of 6 for great value*This heavy duty bike hooks set from Capri tools includes 6 pieces bike hooks, ideal to use for ceiling storage of bicycles, lawn furniture, and garden hoses. The soft non-marring and non-slip coated finish to protect surfaces. Hooks are made of heavy duty galvanized steel construction that adds durability. Each hook has a 105 pounds capacity and requires a 5/16 inch diameter pilot hole. read more

See at Houzz
Enclume
$234.99

Dimensions: 22"Lx23"Wx33"HThis ergonomic design makes it easy to load and unload logs next to your hearth. Offering three storage ...areas for logs, kindling and newspapers. The tool rod shifts to either side.Includes:*1 - Shovel*1 - Poker*1 - Exclusive sorghum broom. read more

See at Houzz
Master Garden Products
$57.15

This self standing double folding bamboo ladder is uniquely designed to be used as a storage rack for household or commercial disp...lay. Great for placing towels as a rack. It is made of natural solid bamboo and sand finished for indoor use. Double ladder design for extra space and folds up for easy storage. read more

See at Houzz
Enclume
$149.99

Dimensions: Tool Length: 26"Featuring Enclume's famous rolled ends, this set also includes tongs for lifting logs.Includes:1 - Sho...vel1 - Poker1 - Exclusive Sorghum Broom1 - Tongs read more

See at Houzz
Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts