Stanley Power Equipment & Tools

Refine By
Stanley
$89.99 $74.99

This is dual-purpose: it converts from a shoulder plane to a chisel plane.

Stanley
$19.98

2-pack of locking SAE tape measures feature BladeArmor coating on the first 3 inches for maximum blade durability. Measures up to ...a range of 25-ft to help you cover larger areas. 11-ft blade standout and 1-14-in wide blade provide easy readability.... read more

Stanley
$22.97

Equipped with a strong rare-earth magnet at the end, the 25 ft. FatMax Magnetic Tape Measure readily adheres to metal surfaces to ...facilitate easy measuring of beams, pipes, ductwork and more. At 1-1/4 in. wide, it is easy to read and features an 11 ft.... read more

Stanley
$55.39

These FatMax chisels are made with hardened, tempered high-chrome carbon alloy steel blades for edge retention. They are 50% stron...ger than Stanley wood chisels. They are constructed with a steel Thru-Tang shaft and a steel striking cap for use with... read more

Stanley
$8.87

The Stanley 25 ft. LeverLock Tape Measure features a magnetic tip, fractional markings and an automatic bottom lock for steady ope...ration. The blade automatically locks at the length to which it is extended, allowing the user to control retraction and... read more

Stanley
$823.98

Micrometer Torque Wrench, Drive Size 1 In., Head Type Ratcheting, Calibration Certificate Included No, FootPound/NewtonMeter, Prim...ary Scale Range 140 to 700 ft.lb., Primary Scale Increments 2 ft.lb., Standard Tool Accessory Needed for Tethering... read more

Stanley
$184.88

Stanley J6062CXCERT Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% in clockwise ...direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading of each wrench in a... read more

Stanley
$21.74

FatMax Hammer Tacker, Heavy Duty, Steel, FatMax, Narrow Crown Staple, 27/64 in Crown Width, 5/16 in, 3/8 in, 1/2 in Leg Length, 16...8 Staple, 13 in Overall Length, 3-1/2 in Overall Height, Chrome Plated, For Installation of Insulation, Plastic Sheeting,... read more

Stanley
$62.34

Hammer Tacker, Manual, Heavy Duty, Staple Type Heavy Duty Narrow Crown, Nail Type Brad Nail, Crown Width 3/8 In., 1/2 In., Leg Len...gth 1/2 In. to 5/16 In., Nail Length Staples Only, Staple Capacity 1250, Nail Capacity 1250, Body Material Aluminum, Body... read more

Stanley
$101.95

Precision Adjustable Pin Spanner Wrench, Capacity 0 to 50mm, Overall Length 210mm, Pin Dia. 2.5 to 4mm, Pin Length 25/32 In., Wren...ch Material Alloy Steel, Finish Satin, Application Slide Slot Nut, Standards Federal Specification GGG-W-665C read more

Stanley
$70.96

Range 100 Degrees / Accuracy +/- 3/32' Measures distance, calculates area and volume for quick and Easy job estimates Addition/sub...traction function for convenient way to compute on the job without a calculator or manual math Continuous measurement to... read more

Stanley
$162.28

Dial Torque Wrench, Drive Size 1/4 In., Head Type Fixed, Primary Scale Range 6 to 30 in.lb., Primary Scale Increments 0.5 in.lb., ...Secondary Scale Range 0 to 35 cm kg, Secondary Scale Increments 1 cm kg, Electric Light/Tone No, Overall Length 10 In.,... read more

Stanley
$19.99

Durable Mylar-coated blade. Heat-treated, long life spring. Positive blade lock will not creep while measuring. Graduated in 1/16i...n. increments. Belt clip. U.S.A. Single, Pair, or Set Single, Tape Type Mylar coated steel, Measures up to ft. 35,... read more

Stanley
$13.99

Durable Mylar-coated blade. Heat-treated, long life spring. Positive blade lock will not creep while measuring. Graduated in 1/16i...n. increments. Belt clip. U.S.A. Tape Type Mylar coated steel, Automatic Rewind Yes, Dimensions L ft. x W in. 12 x 3/4... read more

Stanley
$32.02

75% larger strike face compared to traditional hammers for improved striking accuracy. The slip resistant handle provides a secure... grip during use. Designed with a magnetic nail start for extended reach for 1-handed nailing. read more

Stanley
$52.02

Adjustable Face Spanner Wrench, Capacity 4 In., Overall Length 103/8 In., Pin Dia. 5/16 In., Pin Length 1/2 In., Wrench Material A...lloy Steel, Finish Black Oxide, Application Servicing Seal and Packing Nuts On Hydraulic Cylinders, Standards Federal... read more

Stanley
$114.36

Single Open End Wrench, Metric, Head Size 75mm, Black Oxide Finish, Head Angle 15 Degrees , Overall Length 19-11/16 In., Carbon St...eel Wrench Material, Standards ASME, Features Long Handle, Hook Eye read more

Stanley
$134.60

FEATURES: Satin finish provides corrosion resistance and a slip resistant grip. 6 point box end allows for large wrench to fastene...r contact area which helps prevent rounding of the fastener. Anti-Slip Design (ASD) open end. -Patented locking grooves... read more

Stanley
$19.99

Blade has a heavy-duty Mylar coating for smooth operation. Heavy, strong spring for swift blade recall. Ergonomic case has comfort... grip. 25 ft. x 1 1/4 in. with 11 in. standout. Massive bumper. Lifetime limited warranty. Material Type ABS w/rubber... read more

Stanley
$10.00

This 5 ounce magnetic tacking hammer is best used for driving tacks and brads. The face is magnetic and has a finished polish. For... a comfortable grip and durability, the handle is made from hickory. read more

Stanley
$8.31

Stanley's Nail Sets are as much about how they balance in the hand as the quality of steel from which they are made. These nail se...ts pass this professional litmus test. They are shaped and balanced to provide great control. read more

Stanley
$49.97

The Stanley 65 ft. Laser Distance Measurer is ideal for painters, contractors, realtors or anyone else who needs to measure a room... quickly and efficiently. This device can not only measure distance but also calculates area and volume. Automatic... read more

Stanley
$10.72

This 12 in. adjustable wrench grips to many fastener sizes. The knurl adjustment mechanism delivers precise adjustment. Jaw measur...ements in SAE and mm. A built in tension spring stabilizes movable jaw. read more

Stanley
$80.07

This Stanley TLM99 Laser Distance Measurer is ideal for indoor/outdoor measuring and layout jobs. It has a distance range of 100 f...t. which accommodates smaller to some larger jobs. It was engineered to make job estimates less time consuming with an... read more

Stanley
$22.97

The FatMax 25 ft. Auto Lock Tape Measure has a blade that automatically locks at the length to which it is extended and includes a...n oversized detachable framing hook that easily grabs studs. Depressing the button converts the tool to manual mode,... read more

Stanley
$7.26

The fixed joint design is used for grasping, bending and cutting. Individually sharpened blades cut soft and hard wire. Slip-resis...tant bi-material handles for a comfortable grip. The steel is drop-forged for strength and durability. read more

Stanley
$27.56

These chisels are produced from hardened chrome steel. The blades are etched with the size for identification. The end of each chi...sel is designed with a steel strike cap. read more

Stanley
$18.55

This chisel set has an accessible packaging which enables the user to evaluate the chisels. They are made with a one piece constru...ction. Designed with a powder-coated finish for visibility. read more

Stanley
$6.26

These 5 in. Needle Nose Pliers from Stanley enable precise maneuvers in tight spaces. Fashioned with teeth that run all the way to... the tip, this instrument is able to twist and grip small objects in hard-to-reach areas. The double-dipped handles make... read more

Stanley
$131.00

This compo cast sledge hammer will not spark when hitting metal surfaces. To eliminate bounce back lead shot is used in the hammer.... The hammer is covered in a urethane coat to reduce noise. read more

Stanley
$23.84

Dead-blow hammers are non-marring and come in handy when you want to reduce back-lash (or back-bounce) of a hammer. These hammers ...have a non-sparking soft face and no exposed metal. The soft face prevents marring of surfaces or equipment. Dead blow... read more

Stanley
$11.31

The Premium Adjustable Quick Square Layout Tool is crafted from heavy-duty aluminum for long-lasting durability. Bright yellow gra...duations stand out against the black square, making them easy to see while working. The square's adjustable arm ensures... read more

Stanley
$25.46

Forty fiberglass strands combine to form the strong, durable tape of the Stanley 300 ft. Tape Measure. Two-sided blade graphics ha...ve easy-to-read fractional in. and decimal ft. scales, and a folding Tru-Zero end hook provides accurate inside and... read more

Stanley
$26.84

The masonry hammer has a blade style edge for scoring the material before striking. The hammer is built from 1-piece of steel for ...strength and durability. A slip resistant handle provides a secure grip. read more

Stanley
$24.13

Stanley's IntelliMeasure Distance Estimator enables just one person to measure accurately up to 40 ft. without the need for assist...ance. A toggle button allows you to choose from three measuring modes for versatile functionality including length, area... read more

Stanley
$22.36

This engineer hammer has a 3 lbs. head with 2 striking surfaces. The AntiVibe technology limits the amount of vibration and shock ...transfers into the users arm. It is constructed from a 1-piece of steel for strength and durability. read more

Stanley
$3.97

Stanley is proud of its reputation for excellence. We are dedicated to continually testing, designing and improving our products t...o ensure quality and maximum function. Maintaining our standing of being the world's best at what we do is important to us... read more

Stanley
$115.55

This Stanley TLM65 Laser Distance Measurer is ideal for large measuring and layout jobs with a range of 165 ft. It is able to meas...ure distance and calculate area and volumes. The automatic calculations make job estimates quick and easy. read more

Stanley
$13.96

The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails..., lifting and prying objects. Beveled cutting edges and nail slots for quality performance. read more

Stanley
$44.02

Dead-blow hammers are non-marring and come in handy when you want to reduce back-lash (or back-bounce) of a hammer. These hammers ...have a non-sparking soft face and no exposed metal. The soft face prevents marring of surfaces or equipment. Dead blow... read more

Stanley
$6.17

The Stanley long nose pliers are ideal for twisting, gripping and cutting. Its long head can be used in cramped spaces. For streng...th, it is constructed from drop forged steel. read more

Stanley
$15.97

The anti-slip mechanism locks the movable jaw and tightly grips onto fasteners. It is constructed form forged chrome vanadium stee...l for strength and durability. A wide locking handle allows for a secure grip. read more

Stanley
$6.27

The Premium quick square is built out of aluminum for light weight and durability. The yellow markings on the black square stand o...ut. Has 0 to 90° scale. The tool can be used as a saw guide as well. read more

Stanley
$60.88

This compo cast sledge hammer will not spark when hitting metal surfaces. To eliminate bounce back lead shot is used in the hammer.... The hammer is covered in a urethane coat to reduce noise. read more

Stanley
$12.95

The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails..., lifting and prying objects. Beveled cutting edges and nail slots for quality performance. read more

Stanley
$9.99

The Stanley 16-150 Basic 3 Piece Wood Chisel Set features carbon-steel blades for durability and strength. Black polypropylene han...dles resists deformation. Includes: 16-153, 16-155, 16-157 Stanley chisels. read more

Stanley
$13.99

The Stanley 100 ft. Tape Measure features easy-to-read markings on the tape that allow for easy and accurate measurement readings.... Its blade is crafted with steel to help ensure strength and comes with a polymer coating for durability. Its end hook... read more

Stanley
$11.97

The Stanley 25 ft. Tape Measure makes it easy for one person to make measurements and markings, thanks to its rigidity and a posit...ive blade lock to keep it unspooled. The metal tape has a 7 ft. standout and features 16 in. and 19.2 in. stud-center... read more

Stanley
$22.20

Stanley has a long, rich history of manufacturing some of the world’s best-performing and best-selling hammers, a product traditio...n that continues to this very day. Stanley’s world-renown and world-class research and development teams design hammers... read more

Stanley
$19.26

These FatMax chisels are made with hardened, tempered high-chrome carbon alloy steel blades for edge retention. They are 50 percen...t stronger than Stanley wood chisels. They are constructed with a steel Thru-Tang shaft and a steel striking cap for use... read more

Stanley
$10.13

This set of one-piece construction forged steel punches are hardened, quenched and tempered for a long tool life. They are powder ...coated for visibility. They are ideal for marking metal or making indentations. read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts