Refine By
Powermatic
$226.99

30 in. Short Rail Set for 66, PM2000, PM3000 Table Saws - 2653039Z. Designed for the Powermatic 66, PM2000, PM3000 Table Saws. Qui...ck and simple installation read more

Powermatic
$276.99

50 in. Long Rail Set for 66, PM2000, PM3000 Table Saws - 2653031Z. Designed for the Powermatic 66, PM2000, PM3000 Table Saws. Quic...k and simple installation read more

Powermatic
$276.99

50 in. Long Rail Set for 66, PM2000, PM3000 Table Saws - 2653031Z. Designed for the Powermatic 66, PM2000, PM3000 Table Saws. Quic...k and simple installation read more

Powermatic
$2,854.99

This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The p...owerful 5 HP motor and 20 In. planing capacity will handle the most demanding work. The 5 In. dust port connects easily to any dust collector. The cutter head has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutter head for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated Infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cas read more

Powermatic
$8,518.88

This 1300 Lb. heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows... easy access to the rollers and knives, and has a 5 In. dust port for easy attachment to any dust collection system. The cutter head is a helical design with 150 four sided knife inserts â€" these produce a superior finish and much quieter operation compared to conventional cutter heads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutter head for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional Infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is m read more

Powermatic
$4,284.99

The 209HH, 20-Inch Planer, 5HP 1PH 230V, With Byrd ? Cutterhead, makes it easy to get a consistent thickness on your boards by sh...aving them down at their highest points. It sports a 5 hp motor that runs the helical cutterhead at up to 5,000 rpm to quickly remove excess. This Powermatic 209HH planers variable feed system operates at your choice of 16/20 or 24/31 feet per minute for better control. The cast iron table is robust and rigid to give you consistent results. This Powermatic planer can accommodate a board up to 20 inches wide, which makes it ideal for mid-size projects. Casters on the cabinet base make it easy to move the table around. Its 5-inch dust port helps to keep particles out of your eyes. read more

Powermatic
$3,059.99

1791213 Features: -15'' planer with byrd shelix helical cutterhead.-15HH. Assembly Instructions: -Assembly required. Dimensions: -...Dimensions: 43.5'' H x 28'' W x 48'' D. read more

Powermatic
$8,159.99

Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems Cast iron 1300...-pound construction for solid performance without vibration 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work Segmented infeed roller with sectional chipbreaker allows multiple board planning Roller bearing-mounted feed rollers for long life read more

Powermatic
$15,973.99

Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, redu...ces sound levels Digital readout and simple PC controller make quick and easy table height set ups read more

Powermatic
$3,059.99

Byrd helical cutterhead with 98 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional sys...tems. Powerful 3HP TEFC motor controlled by magnetic switch for safety. Three V-belts transfer maximum power to the cutterhead. Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8-Inch maximum depth of cut and trouble-free operation. Large cast iron handwheel positions table quickly and easily. read more

Powermatic
$5,486.99

3 HP motor with 9-Inch by 138-3/4-Inch abrasive belt handles large workpieces Oscillates 24 cycles per minute for better finish an...d longer belt life 9-1/2-Inch by 48-Inch platen with graphite pad offers largest work surface in its class Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking Pedestal control switch for easy access read more

Powermatic
$6,816.99

7-1/2 HP motor for plenty of power Independently adjustable rear drum for fine tuning Hard durometer rubber coating on steel drums... provides flat, smooth finish Two-speed gearbox for wide range of sanding projects Full size cast iron table for solid support read more

Powermatic
$4,284.99

The Byrd SHELIX helical cutterhead with 99 knife inserts provides smoother, quieter cutting and finer finish than conventional sys...tems 5HP motor and 20-inch planing capacity for heavy duty work read more

Powermatic
$6,425.99

WMI1021Features: Open end belt sanderModel 1632 Specifications:5HP, 1Ph, 230V1/4HP, 1Ph feed motor Assembly Instructions: Assembly... required Dimensions: Dimensions: 66" H x 29" W x 40" D read more

Powermatic
$4,284.99

This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The p...owerful 5 HP motor and 20 In. planing capacity will handle the most demanding work. The helical cutter head provides quieter operation and finer finishing than conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5 In. dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutter head for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated Infeed and fine groove read more

This item has been added to your list

This item has been added to your sale alerts