OTC
$70.99 $54.99

3-Pc. Pry Bar Set that's comfortable to hold, yet can still take a beating ? OTC 8203OTC's heavy-duty HandLED Pry Bars are made of... tempered square steel that stands up to any hits you can deliver?without damaging the handle. Durable black chrome striking cap takes the hits without damage. Ergonomic, composite handle lets you work more comfortably, with reduced hand fatigue.Polished tip with black oxide finishLong-life finish resists rustOTC Marathon Lifetime Warranty read more

OTC
$65.87

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. OT...C Tools 24in Ratcheting Chain Wrench 6969 Product Features Ratcheting Chain Wrench 24in Ratcheting action makes it... read more

OTC
$551.96

Retaining Ring Pliers Features Item Weight - 1 lbs.

OTC
$25.59

The OTC 7174 is indexible to 180° for better access. It features 14 locking positions for leverage in multiple applications, and a... knurled handle assures a sure grip. This pry bar also meets or exceeds ANSI specifications for pry bars. 15” in length.... read more

OTC
$41.82

Sensor Wrench, Manual, fleible head design, Removal of O2 Sensors that are 7/8 In. in Dia.

OTC
$26.11

Wheel bearing locknuts are easy to remove or install with these specially designed sockets. They’re made of high strength steel an...d resist rounding out. Measure from flat side to flat side of locknut to determine size needed. Note: Sockets are designed... read more

OTC
$187.80

Includes Adjustable Hook Spanner Wrench - 7308

OTC
$54.45

Clutch Adjusting Wrench, Length 5 In, Internal Adjustment of Spicer Angle Spring and Multiple Lever Clutches, Number of Pieces 4, ...Includes Gripper Handle, Hex Screw, Spacer and Wrench Size: -. read more

OTC
$24.56

Locknut Socket, Drive Size: 3/4, SAE or Metric: SAE, Socket Sizes: 3-3/4in, Output Type: Double Square, Socket Depth: Deep, Number... of Points: 8, Tether Capable: Standard Tool (Accessory Needed for Tethering), Overall Length: 3-1/2in, Finish: Natural,... read more

OTC
$89.62

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. Pr...oduct Features Heavy-Duty Snap Ring Pliers Set (2 piece) Heat treated steel circlip pliers for large equipment repair.... read more

OTC
$19.52

Hex Key Wrench long-arm wrench provides added leverage and accessibility. Features 5 mm hex key wrench. Rust resistant black oxide... finish. Item Weight - 0.3 lbs. read more

OTC
$65.84

Includes 3.5mm Pin - 526908-1, 4mm Pin - 526908-2, 4.5mm Pin - 526908-3, 5mm Pin - 526908-4, 6mm Pin - 526908-5, 7mm Pin - 526908-...6, 10 mm pin - 526908-7, Handle - 526908-8, Storage Case read more

OTC
$76.03

The Tire Spoon Holding Pliers are the 3rd hand needed to ease mounting and demounting of tires using multiple tire spoons. The pli...ers quickly and easily clamp onto the wheel to provide a solid support for handling additional spoons. The clamping design... read more

OTC
$34.14

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. OT...C Tools Hose Clamp Pliers Set 2pc 4502 Product Features Includes cross-slotted jaw pliers and a wide, flat-band hose clamp... read more

OTC
$67.91

Indexing Pry Bar Set, Number of Pieces 3, Overall Length 10 In., 12 In., 15 In., Overall Width 23/30 In., Material Steel, Features... Indexible to 180 Degrees F,(14) Locking Positions, Knurled Handle, Standards ANSI, Includes 3 Pry Bars and Storage Case read more

OTC
$71.58

These adjustable locking pliers can be used to hold pulleys, clutch hubs, flywheels, gears, and sprockets with internal or externa...l teeth up to 4 inches diameter. They can also be used on applications with slots or holes with the addition of the... read more

OTC
$31.88

Features and Benefits:- The bore of the shaft diameter range 1-13/16'' to 3 1/2''- Size range of ring 181 to 300- Durable construc...tionThere is such a wide variety of retaining pliers, available individually or in sets, to handle many applications-... read more

OTC
$25.90

Features and Benefits: The bore of the shaft diameter range 1/2in to 1in Size range 50 to 100 Durable construction There is such a... wide variety of retaining pliers, available individually or in sets, to handle many applications. This particular one is... read more

OTC
$39.33

IOE1418: Features:-Forged jaws with sure-grip teeth grab the filter for easy removal.-Slip joint ratchet and lock mechanism allows... a secure grip on filters ranging from 3-3/4 to 7 (95mm to 178mm) in diameter.-Pliers are 18 long.-Large A Size: 3-3/4 - 7... read more

OTC
$117.10

Exhaust Hanger Pliers. Item Weight - 1.8 lbs.

OTC
$110.49

For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information. OT...C Tools SNAP RING PLIER 7295 Product Features Retaining Ring Pliers The squeeze-lock ratchet action of this tool locks... read more

OTC
$96.42

Universal oil filter wrench that fits most large size oil filters in one wrench. Heavy duty knurled leg design for extra grip and ...strength. Self-gripping design for true universal fit for filters ranging from 4 inches to 6-1/2 inches and has a 1/2 inch... read more

This item has been added to your list

This item has been added to your sale alerts