Williams Hand Tools

Refine By
Williams
$27.99 $19.84

The SuperCombo features open ends with special grooves that direct force away from fastener corners to minimize wear. Box opening ...design allows application of higher torque without rounding or deforming hex fastener points Can be used on all common Hex... read more

Williams
$166.43

2 3/8-InchOffset box end tubular handle wrenchUnique, versatile design that allows the wrench to be used with or without optional ...handlesTubular wrench may be used without the handle to quickly run down nutsHandle can be attached to provide maximum... read more

Williams
$42.15

24-Inch longForged strong I beam handleDesigned for working in confined areas when regular pipe wrenches will not fitPortable and ...lightweight for overhead or underground workPipe diameter capacity of 6-Inch read more

Williams
$29.08

1/4 Square Drive x 1/4 Female Hex, Small and low profile head, polished chrome, reversible 52 tooth gear head, When ratcheting is ...not required, quick disk on drive head allows for quick tightening or loosening of fasteners. Works well with 1/4 drive... read more

Williams
$56.04

Ideal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hold up under the most rigorous industrial u...se. SKU : ADIB002FHNIXW read more

Williams
$31.99

Handles are durable and comfortableHeavy duty construction for strength and durability use with Soft-Face hammer tips belowMatch h...ead diameter with tip diameter for proper fitTips are not included with hammer body read more

Williams
$116.75

1 1/2-InchOpen end tubular handle wrenchUnique, versatile design allows wrench to be used with or with out optional handlesTubular... wrenches may be used without the handle to quickly run down nutsAlso has a metric measurement of 38 millimeters read more

Williams
$49.40

1 1/4-InchStraight box end tubular handle wrenchUnique, versatile design that allows the wrench to be used with or without optiona...l handlesTubular wrench may be used without the handle to quickly run down nutsHandle can be attached to provide maximum... read more

Williams
$60.88

3/8 to 4-Inch pipe diameter rangeForged handle is fully heat treatedideal for use in close quarters and where space is at a premiu...mSuccessive bites can be taken without removal of wrench from the work pieceFully adjustable to fit any shape pipe read more

Williams
$99.83

Designed for use in the petrochemical industries where clearance, particularly on flanges, and cored fasteners are often a problem...6 point hex is offset 15 degree, and short handle length allows for use in tight spacesStraight handle transfers maximum... read more

Williams
$21.49

1 1/16 by 1 1/4-Inch headsTwo openings in each wrench with 45-Degree chamfer on wrench ends allow easy placement of wrench on the ...fastenerContinuous arc design minimizes spreading and is stronger than the V designSatin chrome finish that provides a... read more

Williams
$68.56

1 1/8-InchOffset box end tubular handle wrenchUnique, versatile design that allows the wrench to be used with or without optional ...handlesTubular wrench may be used without the handle to quickly run down nutsHandle can be attached to provide maximum... read more

Williams
$98.31

PLS-6A 6 Piece General Service Pliers Set Contents Include: PL-1519C 5" utility superjoint PL-76C 6 1/2" chain nose side cutters P...L-1520C 10" utility superjoint 2628G-180 7" side cutting PL-46C 6" diagonal cutting 23503 8 1/4" front-end stripper... read more

Williams
$30.38

Williams 3/8" Drive Flare Nut Crowfoot Wrenches are available in satin chrome finishTight tolerance for snug fit on fastenersFeatu...res Proto Anti-slip design read more

Williams
$71.00

1 1/8-InchStraight box end tubular handle wrenchUnique, versatile design that allows the wrench to be used with or without optiona...l handlesTubular wrench may be used without the handle to quickly run down nutsHandle can be attached to provide maximum... read more

Williams
$57.98

7/8-InchOffset structural box wrenchOffset from handle to permit clearance of obstructionsHandles are tapered for insertion into b...olt holesIndustrial Black Finish read more

Williams
$42.89

Williams 3/8" Drive Flare Nut Crowfoot Wrenches are available in satin chrome finishTight tolerance for snug fit on fastenersFeatu...res Proto Anti-slip design read more

Williams
$239.10 $213.20

High Polish Chrome FinishSUPERCOMBO(R) open end has specially designed grooves that direct wrench force away from fastener corners....SUPERTORQUE(R) box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points.Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application.May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy.Box and open end openings are identical.Hand tools made in U.S.A. for automotive, industrial, or general purpose use.Contents Include:Product Code Size1207MSC 7 mm1208MSC 8 mm1209MSC 9 mm1210MSC 10 mm1211MSC 11 mm1212MSC 12 mm1213MSC 13 mm1214MSC 14 mm1215MSC 15 mm1216MSC 16 mm1217MSC 17 mm1218MSC 18 mm1219MSC 19 mm1220MSC 20 mm1221MSC 21 mmA 15% restocking fee is charged to return this item (unused). J H Williams MWS-15A 15 Piece High Polish Chrome Finish 12 Point Metric SUPERCOMBO Wrench Set in Roll Pouch read more

Williams
$219.88

Product DescriptionIdeal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hold up under the most ri...gorous industrial use.From the ManufacturerSnap-on Industrial Brand JH Williams 6-Piece adjustable pin spanner wrench set comes in a roll pouch and has an industrial black finish. They are ideal for adjusting collars, lock nut rings, and bearings. They are specifically engineered to hold up under the most rigorous industrial use. read more

Williams
$38.81 $35.27

For adjustments of collars and locknuts. Ideal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hol...d up under the most rigorous industrial use. read more

Williams
$15.67 $12.32

25Degree offset handle cleanrs obstructions that flat handle wrenches cannot Allows fast removal of fasteners with a ratcheting ac...tion at each end Ideal for long "bolt-through" applications read more

Williams
$23.44

Aluminum pipe wrenches are approximately 40% lighter than cast iron. Heavy duty construction for strength and durability. Scale on... wrench indicates pipe diameter. read more

Williams
$46.58

Forged strong I Beam handle. Designed for working in confined areas when Shallow pipe wrenches will not fit, excellent for pipe fi...ttings. Portable and lightweight can be used for overhead and underground work. read more

Williams
$63.63 $50.09

SUPERCOMBO? open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE? box opening d...esign allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points. Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application. Box and open end openings are identical read more

Williams
$50.28 $50.11

Ideal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hold up under the most rigorous industrial u...se. read more

Williams
$262.42 $256.01

Wrench heads are offset at 15Degree and 60Degree to the handle. Both ends are the same size to permit the wrench to be used in fou...r different positions. 45Degree chamfer on wrench ends allow easy placement of wrench on the fastener. Continuous arc design minimizes spreading and is stronger than "V" design. Thin head is perfect for tight clearances. Satin provides good grip and cleans easily. read more

Williams
$138.24 $113.91

Ideal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hold up under the most rigorous industrial u...se. read more

Williams
$31.90

Snap-on Industrial Brand JH Williams 3/4 to 2-Inch adjustable pin spanner wrench is ideal for adjusting collars, lock nut rings, a...nd bearings. It is specifically engineered to hold up under the most rigorous industrial use. It has a black industrial finish and has a pin length of 1/8 . read more

Williams
$45.21 $30.55

Ideal for adjusting collars, lock nut rings, and bearings. Specifically engineered to hold up under the most rigorous industrial u...se. read more

Williams
$59.06 $48.66

Heavy duty construction for strength and durability Scale on wrench indicates pipe diameter Includes 8", 12", and 18" wrenches A 1...5% restocking fee is charged to return this item (unused). J.H. Williams 13544 3 Piece Cast Iron Pipe Wrench Set (8", 12", and 18") JHW-13544 read more

Williams
$27.17 $22.18

Ultra thin pattern for use on jam nuts and access to confined areas. 30Degree offset head, Satin.It is of durable quality and high...ly efficient. read more

Williams
$42.02

Wrench heads are offset at 15Degree and 60Degree to the handle. Both ends are the same size to permit the wrench to be used in fou...r different positions. 45Degree chamfer on wrench ends allow easy placement of wrench on the fastener. Continuous arc design minimizes spreading and is stronger than "V" design. Thin head is perfect for tight clearances. Satin provides good grip and cleans easily. read more

Williams
$31.78

Satin Chrome Finish, 3/8" Drive crowfoot wrench, flare nut, 12 Point.It belongs to the tools category.It is of durable quality and... highly efficient. read more

Williams
$222.23 $207.75

SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE box opening des...ign allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points. Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application. May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy Box and open end openings are identical read more

Williams
$35.62 $31.13

Satin Chrome Finish, 3/8" Drive crowfoot wrench, flare nut, 12 Point.It belongs to the tools category.It is of durable quality and... highly efficient. read more

Williams
$13.21 $12.14

11/32-Inch size wrench Super combo combination wrench No contact is made at the corners of the hex fasteners Wrenching forces are ...placed on the flat surfaces behind the points Use on all common hex, 6 point, fasteners, Manufacturer: Snap-on Industrial Brand JH Williams read more

Williams
$92.13 $79.67

Allows fast removal of fasteners with a ratcheting action at each end Ideal for long "bolt-through" applications. Flat handle allo...ws access to tight clearance areas. read more

Williams
$13.73

Measurement scale on head conveniently shows fastener size. Chrome wrenches are fully polished for easy clean-up Exceed ANSI speci...fications for strength. Precision hardened and anti-corrosion treated. read more

Williams
$23.93

15ø open end provides two gripping angles when wrench is turned over. Tapered spud handle locates and aligns bolt and rivet holes.... read more

Williams
$61.74 $58.75

Features: Striking face wrenches are designed to be struck by a hammer on the anvil area in order to loosen frozen fasteners or to... set and tighten fasteners. Anvils are proportional to opening sizes. Special heat treating provides maximum durability for long life. Offset handle is close to head to provide clearance in confined areas. Williams’ expanded line of offset striking face wrenches, up to 4-1/4”, provides the most extensive line on the market. Specifically engineered to hold up under the most rigorous industrial use. Specifications: Size (MM): 36 MM Overall Length: 11-1/2" Box End Diameter: 2-5/32" Box End Thickness: 29/32" A 15% restocking fee will be charged to return this item (unused). J.H. Williams JHW-8809BW Industrial Black Finished Offset Pattern 12 Point Box End Striking Wrench 36MM read more

Williams
$99.88 $81.69

SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners SUPERTORQUE box opening des...ign allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points. Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application. May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy Box and open end openings are identical read more

Williams
$67.14 $59.24

Measurement scale on head conveniently shows fastener size. Chrome wrenches are fully polished for easy clean-up Exceed ANSI speci...fications for strength. Precision hardened and anti-corrosion treated. read more

Williams
$78.14 $77.99

Handles are durable and comfortable. Heavy duty construction for strength and durability use with Soft-Face hammer tips below. Mat...ch head diameter with tip diameter for proper fit. Tips are not included with hammer body read more

Williams
$37.99 $35.17

Satin Chrome Finish, 3/8" Drive crowfoot wrench, flare nut, 12 Point.It belongs to the tools category.It is of durable quality and... highly efficient. read more

Williams
$15.66 $15.37

Wrench heads are offset at 15Degree and 60Degree to the handle. Both ends are the same size to permit the wrench to be used in fou...r different positions. 45Degree chamfer on wrench ends allow easy placement of wrench on the fastener. Continuous arc design minimizes spreading and is stronger than "V" design. Thin head is perfect for tight clearances. Satin provides good grip and cleans easily. read more

Williams
$102.18 $89.36

5-Piece set. Metric/MM. High polish chrome finish. Comes with Roll Pouch. 7mm x 8mm, 9mm x 10mm, 11mm x 12mm, 13mm x 14mm, 15mm x ...17mm Allows fast removal of fasteners with a ratcheting action at each end Flat handle allows access to tight clearance areas Ideal for long bolt through applications and is metric, Manufacturer: Snap-on Industrial Brand JH Williams read more

Williams
$169.17 $161.48

72-tooth gear requires only 5 Degree of ratcheting arc to engage next gear. High polish satin-chrome finish cleans easily & protec...ts against corrosion. Thin profile is perfect for tight clearances where accessibility is critical.12-point ratcheting box end allows for superior fastener engagement. read more

Williams
$33.87 $32.29

Size: 22mmOverall Length: 12-1/2"Closed End Points: 12Material: SteelFinish: ChromeSUPERCOMBO Open End Has Specially Designed Groo...ves That Direct Wrench Force Away From Fastener CornersSUPERTORQUE Box Opening Design Allows Higher Torque Without Rounding Or Deforming Fastener Corners By Placing Wrenching Forces On The Flat Surfaces Rather Than The PointsMay Be Used On All Common Hex (6 Point) Fasteners With Considerable Advantage Over Conventional Box End Wrenches To Increase Both Hand Tool Flexibility And EconomyBox End And Open End Are Identical Sizes read more

Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts