Handtool Sets - Hand Tools

Refine By
Channellock
$39.99

Set includes 3 Channellock Griplock tongue and groove pliers, 6 1/2in., 9 1/2in. and 12in. pliers. Material Type Drop-forged alloy... steel, Handle Type Channellock Blue comfort grip, Jaw Capacity in. 1 1/16 6 1/2 in., 1 1/2 9 1/2 in., 2 1/4 12 in., Tool... read more

Yescom
$36.99

Features: 6 pieces bonsai tool kit - satisfy your desires of styling and developing your own plants Suitable for a beginner or a p...rofessional Durable-made of carbon steel Comes with a nylon case for convenience Specification: Leaf trimmer length: 4 1/3... read more

OTC
$139.99 $108.45

9-Way Slide Hammer Puller Set pulls flange-type rear axles and most front-wheel drive hubs — OTC 4579Internal and external jaws pr...ovide a variety of combinations to pull bearings, gears and seals. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Designed for use with other OTC 5/8"-18 thread slide hammer attachments. Molded storage case. Shop Equipment - Accessories read more

Klutch
$49.99

The Klutch Extra-Long 14-Pc. SAE Combination Wrench Set is made of chrome vanadium steel for strength and durability. Backed by a ...lifetime guarantee. Material Type Chrome vanadium, Storage Type Pouch, SAE Sizes in. 3/8-1 1/4, Finish Type Raised panel,... read more

Klutch
$19.99

This Klutch 3/8in. Drive Crowfoot Flare Nut Wrench Set is great for use on soft fasteners. Full polish chrome finish helps protect... against corrosion and will extend the life of the wrenches. Set includes 10 popular metric sizes from 10mm to 19mm and... read more

Grip
$29.99

Grip double-end wrenches feature a thin but extra strong design to reach confined working areas where traditional wrenches can't r...each. Made of drop-forged, heat treated, chrome-plated steel. Pieces qty. 9, Finish Type Chrome, Measurement Type Metric,... read more

Klutch
$19.99

This Klutch 10-pc. mini wrench set includes popular metric sizes perfect for use in tight spaces 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm,... 8mm, 9mm, 10mm and 11mm. Made of carbon steel. Set comes with storage pouch. Backed by a lifetime guarantee. Pieces qty.... read more

Titan
$19.99

Chrome vanadium steel pliers have comfortable TPR handles for maximum grip and comfort. Includes 7in. linemans, 6in. diagonal cutt...er, 6in. slip-joint and 6in. long nose pliers. Limited lifetime warranty. Tongue + Groove Pliers qty. 0, Storage Type... read more

Grip
$29.99

Grip double-end wrenches feature a thin but extra strong design to reach confined working areas where traditional wrenches can't r...each. Made of drop-forged, heat-treated, chrome-plated steel. Finish Type Chrome, Measurement Type Standard SAE, Pieces... read more

Ironton
$24.99

With this Ironton double box ratcheting wrench set, you get 10 popular SAE sizes with 5 tools. Sizes include 5/16in. x 1/4in., 3/8...in. x 7/16in., 1/2in. x 9/16in., 5/8in. x 11/16in. and 3/4in. x 7/8in. Wrenches also have a forward and reverse ratchet... read more

Klutch
$24.99 $19.99

High-quality Klutch wrenches are made of carbon steel with a black oxide finish to prevent corrosion. Maximum openings from 3/4in.... to 1 1/2in. Set includes 6in., 8in., 10in. and 12in. adjustable wrenches. Backed by a lifetime guarantee. Material Type... read more

Metal Pro
$189.99

For use with the Metal Pro Ironworker MP 4000, Item# 971662. Starter round punch and die set. Includes punch and die with 1/32in. ...die-clearance for material to 3/8in. thick. Sizes include 1/4in., 3/8in., 1/2in., 5/8in., 3/4in. U.S.A. Application Punch... read more

Ironton
$29.99 $14.99

The Ironton 6-Pc. Combination Pliers Set is made of drop-forged, heat-treated steel. Set includes 6in. and 7in. diagonal cutters, ...10in. groove joint pliers, 8in. linesman pliers, 8in. long nose pliers and 8in. slip joint pliers. Tongue + Groove Pliers... read more

Klutch
$17.99

This Klutch 3/8in. Drive Crowfoot Flare Nut Wrench Set is great for use on soft fasteners. Full polish chrome finish helps protect... against corrosion and will extend the life of the wrenches. Set includes 8 popular SAE sizes from 3/8in. to 7/8in. and... read more

Klutch
$59.99

The Klutch 7-Pc. Metric Angle Combination Wrench Set is made of heat-treated alloy steel. Full polish finish. Each wrench has a st...andard and right angle opening for use in tight spaces. Backed by a lifetime guarantee. Pieces qty. 7, Metric Sizes mm... read more

Great Neck
$31.87

Always have the right set of pliers for the job with this 8-piece set. Heat-treated, drop-forged steel tools feature milled jaws a...nd fully polished heads for long-lasting dependability. Vinyl grips make holding more comfortable and reduce hand fatigue. read more

Lumber Liquidators
$5.99

Chisel Set 4-Piece Flooring . Chisel Set 4-Piece Specs: - Chisel Sizes: 1- 3/4- 1/2 and 1/4- with 7-1/4 long - Carbon steel constr...uction - Straight bevel - Comfortable PVC handles - Hardened tempered carbon steel blade - Lacquered corrosion resistance read more

Bosch
$698.32

Protected Cage for Head Assembly - also provides access to quickly hand position the laser beam on a known point or work area. Ful...l Selection of Beam Visibility Enhancements - such as variable speed selection, variable scan angles for maximum... read more

Eastwood
$49.99 $39.99

When you can bend tubing "kink-free", you avoid wasted time and money! Pliers and Bender both bend 3/16" and 1/4" tubingBender als...o works on 5/16" and 3/8" tubingAligns, bends and adjustsComfort-grip vinyl handles If you try to bend a brake, fuel, transmission or A/C line by hand, you kink the tube...try to align or form the line by hand, you kink the tube. Since you're tired of wasting that time and money, let Eastwood end your frustration with our hand Tubing Bender and Forming Pliers Set. Vehicle Parts - Brakes read more

Eastwood
$39.99 $37.99

This Eastwood 3 Piece Brake Bleeding Wrench Set includes the 3 most popular sized wrenches to allow use on virtually any car, SUV,... light truck, or motorcycle brake caliper or wheel cylinder. Speed bleed brakes from the driver's seat without monitoring the bleeders No drip design made possible by the check valve design. Tool won't bleed unless pumped The one way check valve also eliminates air and old fluid from entering the brake system The 3 different wrench sizes (8mm, 10mm, and 11mm) Wrenches seal to the bleeder valve, and tighten or loosen the valves without breaking the seal Constructed of rugged steel with high-quality silicone hoses and precision machined check valve for long life and brake fluid resistance. Vehicle Parts - Brakes read more

RCBS
$72.99

The RCBS Uniflow Powder Measure is a solidly constructed powder measure that throws consistently accurate powder charges. The Case... Activated Linkage kit allow the uniflow powder measure to be used on most four and five station progressive reloading presses. Technical Information Fits: RCBS Uniflow Powder Measure (Sold separately) Function: Allows the Uniflow Powder Measure to be used on most four or five station progressive presses Material: Includes: Three powder bushings (Small rifle 22-27 caliber, large rifle 28-45 caliber, handgun 32-45 caliber) Notes: Fully adjustable for case length variation Searches for products like these typically include: Reloading Supplies,Reloading Presses,Reloading Press Parts & Accessories,RCBS Press Parts read more

Lee
$15.99

Quick Change Drum Set can be used in conjunction with the Classic Powder Measure and the Auto Drum Powder Measure. All drums are i...nfinitely adjustable within range. No tools are required for adjustment. A graduated adjsutment key iincluded with each drum. Each turn of the adjusting screw is .1cc or about 1 grain of powder. Each key is marked with .01cc graduations allowing easy 1/10 grain powder adjustments. Quickly set your charge, and mark it and the powder type on the flat of the drum set for easy reference for future reloading. Features four precision molded nylon drums:(2) small drums for charging 25 ACP to 223 Remington (2) large drums for charging the 223 Remington to Large Magnums. Also include an insert to allow reduced capacity charging similar to smaller drum. Searches for products like these typically include: Reloading Supplies,Powder Measures, Scales & Tools,Powder Measures & Accessories,Powder Measure Metering Inserts read more

Wisdom
$15.99

This Professional File Set features 10 steel files and 2 handles, enough variety to tackle any project around the shop. Technical ...InformationMaterial: Heat treated steel Includes: 1- 10" 2-way file 1- 8" half round 1- 8" mill saw 1- 8" half round wood... read more

Wheeler Engineering
$49.99

The Wheeler Engineering Professional Gunsmith File Set is perfect for many different gunsmithing jobs. The set comes with a wide g...rade of files from a rough rasp all the way down to a super extra fine diamond plate. Whether your reshaping a wood stock... read more

Bondhus
$44.99

Bondhus T-Handle Ball End Hex Wrenches are among the finest hand tools available today. The ergonomically shaped and cushioned T-h...andle is the perfect choice exerting maximum torque when inserting and extracting screws. The T-handle's design means it... read more

Wisdom
$28.99

This set includes 5 forged, tempered and polished hammers in 8, 12, 16, 24 and 32 oz. Technical InformationFeatures: 5 hammer set ...Notes: Heads are Forged, tempered and polished Wooden handles Searches for products like these typically include:... read more

Geissele
$25.00

Features Made of hardened and tempered 01 tool steel Long taper to prevent bending Includes starter punch and pin punch The Geisse...le Gas Block Pin Punch set are made specifically for the removal and installation of the 0.078" roll pin that secures the... read more

Grace
$29.99

Features Hollow tip to securely hold roll pinsStorage pouch includedHardened from tip to end using heat treating processMade in th...e USA This five piece set is designed to accurately hold roll pins sizes 1/16"; 5/64"; 3/32"; 1/8"; 3.5mm so alignment is... read more

Grace
$19.99

Made in the USA and machined from quality 5/16" 360 solid brass hex stock. Set includes 1/16", 3/32", 1/8", 5/32" punches in a vin...yl pouch. Searches for products like these typically include: Gunsmithing Supplies,Gunsmithing Tools,Hammers, Punches &... read more

DAC Technologies
$16.99

The Winchester Brass and Steel Punch Set is small, compact and convinient. This set comes in a blow molded case. Technical Informa...tion: Winchester Brass and Steel Punch Set Kit includes: Custom tpr molded handle with magnetic head Double faced hammer... read more

Bondhus
$27.99

Specially designed to hold fasteners and screws during insertion or removal from hard-to-reach areas, without taking away from the... strength of the wrench. Insert screws and turn a full 360 degrees at up to a 25 degree angle. Technical InformationNotes:... read more

Bondhus
$49.99

Bondhus T-Handle Ball End Hex Wrenches are among the finest hand tools available today. The ergonomically shaped and cushioned T-h...andle is the perfect choice exerting maximum torque when inserting and extracting screws. The T-handle's design means it... read more

Bondhus
$21.99

Specially designed to hold fasteners and screws during insertion or removal from hard-to-reach areas, without taking away from the... strength of the wrench. Insert screws and turn a full 360 degrees at up to a 25 degree angle. Technical InformationNotes:... read more

Wheeler Engineering
$24.99

Features9-piece set 1/16″ through 5/16″Hardened Steel constructionHemispherical TipFitted Nylon Storage Pouch The Wheeler Engineer...ing Roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The... read more

Grace
$119.99

Features CDA 360 hex brass Non-marring and non-sparking Bench block included Made in the USA GRACE USA 20 Pc Brass Punch Set inclu...ded with our new Grace USA Bench Block Holder is made with utmost precision. The brass punches are manufactured from high... read more

Bondhus
$12.99

A fold up wrench set has many conveniences. A range of blade sizes in one easy to carry package, open a blade to the 180 degree po...sition for spinning a fastener in or out, open to 90 degrees for more torque and screwdriver action. Available in standard... read more

Starrett
$89.99

The 7-piece Center Punch set includes 1/16", 5/64", 3/32", 1/8", 5/32", 3/16" and 1/4" diameter punches to assure the proper size ...punch mark for the work at hand. Hexagon shanks keep the punches from rolling off the bench. Technical... read more

Grace
$32.99

Made in the USA, and machined from quality 5/16" 360 solid brass hex stock these punches are perfect for driving roll pins with pr...ecision which prevents damage to both the firearm and the roll pin. Made in the USA, and machined from quality 5/16" solid... read more

ProMag
$38.99

This hammer and punch set features an 8 oz hammer with brass head and metal handle, along with 14 pin punches. Brass pin punches i...n 1/8", 9/64", 5/32", 3/16", 7/32', 1/4", 9/32" and 5/16" are included, along with non-marring synthetic punches in sizes... read more

Lyman
$49.99

Set includes brass tapper hammer with three interchangeable heads, one each of brass, steel and nylon and 1/16", 3/32", 1/8", 5/32...", 3/16" and 3/8" steel pin punches and one brass drift punch. Comes in a custom wooden tray for easy access. Technical... read more

General Tool
$15.99

Includes 1/16", 5/64", 3/32", 9/64", 5/32" punches.Technical InformationNotes: 1/16", 5/64", 3/32", 9/64", 5/32" Searches for prod...ucts like these typically include: Gunsmithing Supplies,Gunsmithing Tools,Hammers, Punches & Stamps,Punches read more

Bondhus
$12.99

Made from specially formulated steel, these ballend hex keys are more efficient that a regular hex blade because they allow quick ...insertion from a variety of angles into hard-to-reach places. Work great in wide open spaces as well. Corrosion resistant... read more

Grace
$129.99

Features High quality high carbon molbendenum tool steel Reverse taper Bench block inculded Each Grace USA punch is manufactured f...rom the highest quality High Carbon Molbendenum Tool Steel and properly heat treated to ensure long life of the punch.... read more

Grace
$32.99

Steel punches will cover a majority of a gunsmiths needs. Pin punches have a reverse taper which helps to eliminate the punch from... sticking. All heads and tapers are fully polished and stock is satin finished for a positive grip. Made in the U.S.A.... read more

Bondhus
$13.99

Made from specially formulated steel, these ballend hex keys are more efficient that a regular hex blade because they allow quick ...insertion from a variety of angles into hard-to-reach places. Work great in wide open spaces as well. Corrosion resistant... read more

Grace
$33.99

8-piece punch set is machined from solid brass. Set includes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16" punches and ...a vinyl pouch. Technical InformationSet Includes: 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 5/16" Notes: Made in the U.S.A.... read more

Grace
$33.99

7-piece punch set is machined from steel and nickel-chrome plated. Set includes 5/64", 1/16", 3/32", 1/8", 5/32"punches, 1 center ...punch, 1 starter punch and a vinyl pouch. Technical InformationSet Includes: 1/16" 5/64" 3/32" 1/8" 5/32" Center punch... read more

Grip
$29.99

Grip 10-Pc. Snap Ring Pliers Set operate both internal and external rings. Includes 4 bent and 4 straight pliers of heat-treated s...teel, sizes 5 1/2 in. to 9 in. One 5 in. hook and 5 in. pick. Impact-resistant carrying case. Pieces qty. 11, Internal/External Internal/external, Tip Type 4 Bent, 4 Straight, 1 Hook, 1 Pick, Material Type Steel, Tool Length in. 5 1/2-9. 5in. and 6in. pliers have 1.2mm .074in. tip 7.5in. and 8in. have 1.8mm .070in. tip 8.5in. and 9in. have 2.3mm 0.90in. tip Model Number: 57146. Size: 11. Age Group: Adult. read more

Klutch
$19.99

This Klutch 10-pc. mini wrench set includes popular SAE sizes perfect for use in tight spaces 3/16in., 5/32in., 7/32in., 15/64in.,... 1/4in., 9/32in., 5/16in., 11/32in., 3/8in. and 7/16in. Made of carbon steel. Set comes with storage pouch. Backed by a lifetime guarantee. Measurement Type Standard SAE, Pieces qty. 10, Material Type Carbon steel, Storage Type Pouch, SAE Sizes in. 3/16-7/16. Popular SAE sizes Perfect for tight spaces Includes 3/16in., 5/32in., 7/32in., 15/64in., 1/4in., 9/32in., 5/16in., 11/32in., 3/8in. and 7/16in. sizes Made of carbon steel Includes storage pouch Model Number: 81659. Size: 32 Inch. Age Group: Adult. read more

Bondhus
$24.99

Bondhus Balldriver L-wrench Hex tools allow you to work at an angle, making the job easier. Unique non-magnetic button does not we...aken tool or strip screw, but holds screw snug without interfering with tool rotation. U.S.A. Dimensions L x W x H in. 9 1/2 x 3 1/2 x 1 1/2, Sets qty. 1. Model Number: 74937. Size: S. Age Group: Adult. read more

Klutch
$17.99

This Klutch 3/8in. Drive Crowfoot Flare Nut Wrench Set is great for use on soft fasteners. Full polish chrome finish helps protect... against corrosion and will extend the life of the wrenches. Set includes 8 popular SAE sizes from 3/8in. to 7/8in. and includes a handy storage rail to keep the tools organized. Storage Type Rail, Finish Type Chrome, Material Type Steel, Measurement Type Standard SAE, Pieces qty. 8, Drive in. 3/8, SAE Sizes in. 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8. 3/8in. drive Includes 3/8in., 7/16in., 1/2in., 9/16in., 5/8in., 11/16in., 3/4in. and 7/8in. sizes Chrome finish Clip rail for storage Model Number: 81626. Size: 3. Age Group: Adult. read more

This item has been added to your list

This item has been added to your sale alerts