Refine By
Klutch
$39.99

The Klutch 1/4in. 90 Air Mini Die Grinder features an angle head for working in confined spaces. The 20,000 RPM free speed die gri...nder with its lightweight, durable composite housing is ideal for weld grinding, deburring, surface prep and polishing... read more

$146.99 $116.30

Removes rust, surface deposits and welds from hard-to-reach places. Ingersoll Rand Mini Surface-Prep Sander removes rust, surface ...deposits and welds from hard-to-reach places - IR3103XP Mini Surface-Prep Sander does the work with a squeeze of the... read more

Professsional Woodworker
$21.83

The Professional Woodworker 80 Piece Rotary Tool Kit covers all of your basic needs from grinding to sanding to drilling, sawing o...r polishing. A small, thin body construction allows the 12V, 16000 RPM rotary tool to easily fit into your hand and also allows it to fit into tighter spots when detail work is needed. The kit includes 25 cut off wheel discs, 1 mandrel for cut off wheels, 4 polishing cloth wheels, 1 mandrel for polishing cloths, 1 carbide burr, 4 drill bits, 4 piece collet set, 2 sanding drum wheels, 4 sanding drum sleeves, 1 mounted nylon brush, 2 wire brush wheels (steel and brass), 10 aluminum oxide mounted grinding stones, 1 grinding stone, and 20 diamond burr bits. read more

Chicago Pneumatic
$69.99

The Chicago Pneumatic mini die grinder features a compact, lightweight design for easy maneuverability. Excellent for high speed b...lending, smoothing, porting and deburring in confined areas. Tool Length in. 4 3/4, Air Inlet Size in. NPT 1/4, Collet... read more

Strong Hand Tools
$149.99

This Strong Hand Tools offer includes a welding table and clamps. The 30in.W x 20in.L tabletop includes three 1.1in. slots that al...low clamps to be inserted at any point. Table can be set up horizontally or at a 30 angle and adjusts from 26-32in. in... read more

Mayhew Steel
$4.49

These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or... in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Mfg: Mayhew Steel SPECS: 2'''' (7cm) overall. '''' (19mm) punch section. Steel. read more

Proto
$27.69

End Cutting Nippers, Overall Length 41/2 In., Tip Width 11/2 In., Jaw Length 11/8 In., Jaw Width 7/16 In., Cutting Edge Yes, Cutti...ng Capacity/Material 7/16 In., Handle Type Dipped, Handle Color Red, Material Steel, Spring Return No read more

Oregon
$99.99 $94.99

This Oregon Mini Bench Mount Chain Grinder grinder is a compact alternative to full-size bench grinders that delivers precision re...sults in a very small space. Rated RPM 5,000, Motor Hz 60, Product Type Sharpener/Grinder, Arbor Size in. 7/8, Assembly... read more

ATD Tools
$56.85

Great for general grinding, polishing, porting, deburring; gasket removal. 90; angle head allows flexibility in confined areas. Fr...ee Speed: 21,000 rpm Collet: 1/4'? Average Air Consumption: 2.81 CFM Inlet: 1/4? NPT (f) Length: 6.2? Weight: 2.0 lbs read more

ATD Tools
$30.90

Great for general grinding, polishing, porting, deburring; gasket removal. Straight head for versatility in tight spaces. Free Spe...ed: 25.000 rpm Collet: 14;? Average Air Consumption: 2.81 CFM Inlet: 14;? NPT (f) Length: 4.7? Weight: 1.5 lbs read more

Great Neck
$12.08

Great Neck's high quality hand tools are crafted for the professional, do-it-yourselfer and home owner. Great Neck stands behind a...ll it's hand tools with a limited lifetime warranty. read more

Klutch
$19.99

This Klutch 10-pc. mini wrench set includes popular SAE sizes perfect for use in tight spaces 3/16in., 5/32in., 7/32in., 15/64in.,... 1/4in., 9/32in., 5/16in., 11/32in., 3/8in. and 7/16in. Made of carbon steel. Set comes with storage pouch. Backed by a... read more

Oregon
$94.99

This Oregon Mini Bench Mount Chain Grinder grinder is a compact alternative to full-size bench grinders that delivers precision re...sults in a very small space. Volts 120, Bore Diameter in. 7/8, Arbor Size in. 7/8, Bolt Hole Shape Round, Wheel Included Yes, Rated RPM 5,000, Mount Type Bench, Assembly Required Yes, Chain Pitch in. 1/4-3/8, Product Type Sharpener/Grinder, Watts 85, Wheel Diameter in. 4 1/8, Motor Hz 60. Sharpens 1/4in., 3/8in. low profile, 0.325in. and full profile 3/8in. pitch chain Fixed motor angle for consistent grinding Includes two 4 1/8in. wheels 1/8in. and 3/16in. One-way motor operation for greater operator safety Safety shield helps prevent injuryrn Model Number: 310-120. Size: Small. Age Group: Adult. read more

Klutch
$19.99

Each wrench in this Klutch 8-pc. mini metric ignition wrench set features a regular open end on one side and an offset end on the ...other for use in tight places where a regular wrench will not work. 8 popular sizes include 5, 5.5, 6, 7, 8, 9, 10 and... read more

Mayhew
$4.99

These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or... in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Mfg: Mayhew Steel SPECS: 2'''' (7cm) overall. '''' (19mm) punch section. Steel. read more

Klutch
$19.99

Each wrench in this Klutch 8-pc. mini SAE ignition wrench set features a regular open end on one side and offset end on the other ...for use in tight places where a regular wrench will not work. 8 popular sizes include 7/32in., 15/64in., 1/4in., 9/32in.,... read more

Ingersoll Rand
$99.99

features and benefits: contoured, variable speed trigger - maximum control during all surface prep applications durable composite ...housing resists chemicals and extreme temperatures double-sided, adjustable speed regulator allows user to operate tool and change speed with one hand pistol grip maximizes control and maneuverability toolbox tray provides storage of tool, backing pads and accessories included with the tool this mini composite body surface prep tool allows users maximum comfort in a small and lightweight package. The 3103;s ball-bearing construction enhances durability and smooth power delivery. Kit includes: 1 3103 mini air surface prep tool, 1-2; backer pad, 1-3; backer pad, 2-2; surface prep discs (med), 2-2; surface prep discs (coarse), 2-3; surface prep discs (med), 2-3; surface prep discs (coarse), 2-2; sanding disc (80 grit), 2-3; sanding disc (80 grit), 1-tool tray for storage.; composite body design - insulates users hand from frigid compressed air during continuous use applications. read more

Hitachi
$30.52

Use this set of variety of wheels, drills and cutters with the GP10DL 12-volt Peak Lithium Ion Mini Grinder (1.5Ah). Comes in a st...urdy, well designed case and includes 10 sanding belts, 52 sanding discs and 66 cutoff wheels. read more

Klutch
$19.99

This Klutch 10-pc. mini wrench set includes popular metric sizes perfect for use in tight spaces 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm,... 8mm, 9mm, 10mm and 11mm. Made of carbon steel. Set comes with storage pouch. Backed by a lifetime guarantee. Pieces qty.... read more

Chicago Pneumatic
$108.62

A compact sander with plenty of power, Chicago Pneumatic's CP7200S Mini Orbital Sander features a smaller design ideal for tight s...anding jobs. With up to 15,000 RPM speeds and an adjustable speed regulator, the CP7200S can be set to the proper sanding speed for the task at hand. Compact and lightweight design ideal for use in tight work spaces Ergonomic handle and housing provides maximum user comfort and control Large two-finger throttle with rubber molded palm grip for an improved grip Muffled handle exhaust system reduces noise and keeps debris away from the operator Adjustable speed regulator for precise speed setting to the task at hand Mini Random Orbital Air Sander - CP7200S 3 in. Hook; Loop Pad 2 in. Hook; Loop Pad (10) 2 in. 320 Grit Sand Paper (10) 2 in. 400 Grit Sand Paper (10) 2 in. 600 Grit Sand Paper (10) 3 in. 320 Grit Sand Paper (10) 3 in. 400 Grit Sand Paper (10) 3 in. 600 Grit Sand Paper Spindle Wrench Molded Carrying Case read more

Performance Tool
$14.99

Heavy duty drop forged steel construction. Fully polished heads. Tempered cutting jaws. Spring loaded handles. Vinyl insulated gri...ps. Contents: 5-inch Long nose pliers, bent nose pliers, flat nose pliers, diagonal cutter pliers and end nipper pliers. read more

KD Tools
$39.78

6-piece mini file set. Dual material cushion grip handles for added comfort and leverage. Tool grade steel provides outstanding cu...tting ability. Great for deburring rounding and removing tough edges. Stores easily in a tool pouch. This GearWrench 6-piece mini file set is great for a wide range of metal working. The tool grade steel provides long life and maximum cutting ability. Set includes the following 4-in flat half-round round triangle square and knife file. read more

Buffalo Tools
$7.86

The Iplay Light & Flight Airplane ride on toy from International Playthings is the perfect toddler ride on toy. The soft prope...ller spins and the airplane ride on toy lights up with changing patterns! Your toddler will hear the captain speak, realistic take-of sounds, and landing sounds. Turn the key on the toddler ride on toy and shift gears to hear revving sounds. This toddler toy plays familiar tunes. There is storage space under the seat. The rear handle is excellent for beginning walkers, too! Recommended Age: 12+ Months. Requires: 2 x AA Batteries (included). read more

AmPro
$15.79

Ampro's 3pc Innovative Mini Tool Set has a 3-LED Mini Flashlight (5 Lumens Output, 13-Feet Beam Distance), 2m/ 79-Inch Mini Tape M...easure with Belt Clip and a 4-3/4-Inch Liner-Lock folding Knife. This item is great to have around the house for all purpose use. read more

Evolution Power Tools
$75.00

The Evolution Mini Cutters Set expands on the premium quality of Evolution Cyclone Annular Cutters with a specialty design that de...livers maximum performance for use on hand drills. Offering enhanced speed, quality and durability, the Evolution Mini Cutters will out perform any twist drill bit or hole saw. When drilling, each hole is cut cleanly and accurately in a fraction of the time. These cutters are ideal for sheet metal, mild steel, aluminum, plastic, HVAC, light piping, conduit, copper, brass, and stainless steel. Each set contains 7 Mini Cutter Bits, a 3/8-Inch Chuck Arbor with Pilot, Center Punch, Small and Large Washers, and an Arbor Hex Wrench. Diameters included are 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch, 5/8-Inch, 3/4-Inch. read more

Allied Tools
$13.07

Allied Tools are value oriented hand tools and equipment for the experienced Do-it-Yourselfer or occassional tool user. Drives Slo...tted, Phillips, Hex and Torx Fasteners read more

General Tools
$29.74

Fully polished head. Double dipped cushion grip handles for safe gripping. Durable vinyl case for the easy and safe storage of the...se precision pliers. Includes: (1) 5" chain nose serrated jaw pliers. (1) 4-3/4" round nose pliers. (1) 4-7/8" smooth jaw pliers. (1) 4-3/4" curved chain nose pliers. (1) 6" long needle nose pliers. (1) 4-1/4" diagonal head/oval cutter. (1) 4-1/8" end cutter. (1) 4-1/2" linemans pliers. read more

Rikon Power Tools
$899.99

The Rikon 20in. Floor Drill Press features solid cast-iron handles, table rack and pinion system, locking depth stop with gauge, a...nd safety toggle switch. It is constructed with a rugged cast iron base, cast iron head and tilting table that tilts 45.... read more

General Tools Mfg Co In
$17.06

The 10-Piece Mini Screwdriver Set features three popular blade styles - Slotted, Phillips and Torx - with compact handle designs. ...These small-scale screwdrivers are great for computer and electronics repair, or any other application where space is limited. The large, color-coded swivel caps provide fingertip precision and make the tools easily identifiable on a crowded toolbox. Set includes one each of the following sizes - Slotted: 3/64-inch x 1-1/2-inch, 1/16-inch x 1-1/2-inch, 5/64-inch x 1-1/2-inch, 3/32-inch x 1-1/2-inch; Phillips: Number 000 x 1-1/2-inch, Number 00 x 1-1/2-inch, Number 0 x 1-1/2-inch; Torx: T-6 x 1-1/2-inch, T-7 x 1-1/2-inch, T-8 x 1-1/2-inch. read more

Skil
$16.91

This mini multi-purpose tool set features All in One Convenience in a compact, tri-fold storage case. Set Includes: Bit driver and... 10PC Screwdriver Bits: SLOTTED: 4,5,6 PHILLIPS: 0,1,2 HEX: 4,5,6; Socket Adaptor, 5PC 1/4-Inch Sockets: 6,7,8,10,11mm; 1/4x3-Inch Extension Bar; Mini Long Nose Pliers, Mini Diagonal Cutting Pliers; 9mm snap off knife; 4PC Precision Screwdrivers: SLOTTED: 2.4,3.0, PHILLIPS: 2.4,3.0; and a pair of tweezers. Ideal for home, office, auto, and all do it yourself projects. read more

Ironton
$29.99

Ironton single-speed palm sander removes paint and fine-finishes woodcraft projects. Accepts 1/4-sheet sandpaper. Dust and debris ...is collected through the pad and deposited into a bag for nearly dust-free sanding. Palm grip for maximum comfort and... read more

Asstd National Brand
$29.00

If you love paper crafting, then you shouldn't be without this mini tool kit. It includes everything you need for creating custom ...greeting cards, scrapbook layouts and more. Kit includes: 6x8" magnetic mat 6" magnetic ruler scissors reverse-action tweezers art knife brad setter & piercing tool imported read more

Allied International
$14.94

Allied Tools 49032 25-Piece Tri-Fold Mini Tool Set NewBRAND NEWOfficially Licensed

General Tool
$25.10 $17.93

FEATURES: Patented, ergonomically designed handle for rotation, greatercomfort and control Plated alloy steel blades ensure a long... life Hardened tips and shafts ensure a maximum workload Three different blade configurations with color-coded largeswivel heads Overall screwdriver length is 4-5/8" (117mm) Blade length is 1-1/2" (38mm) Set includes one each of the following sizes.Slotted: 3/64" x 1-1/2", 1/16" x 1-1/2", 5/64" x 1-1/2",3/32" x 1-1/2";Phillips: #000 x 1-1/2", #00 x 1-1/2", #0 x 1-1/2";Torx : T-6 x 1-1/2", T-7 x 1-1/2", T-8 x 1-1/2" read more

IRWIN
$126.57

Set includes 1 of each of the following traditional pliers mini end nipper mini flat nose mini long nose mini linemans mini flush ...cut diagonal mini standard diagonal mini needle nose mini bent nose and a hard case. Spring-loaded to reduce fatigue. ProTouch grips provide comfort control and less hand fatigue. Induction hardened cutting edge that stays sharp longer. Nickel chromium steel construction for overall strength and durability. Slim needle nose with fine tip for precision work. Bent nose features a 45 bend in nose. Machined jaws for maximum gripping power. read more

Steelex
$108.62

Nothing beats the convenience of a Quick Change Tool Post for all your metal turning needs. This Quick Change Tool Post Set is siz...ed to fit mini lathes with swings from 7-inch to 11-inch. Set includes a 2-way tool post, 5 tool holders, a 3/8-inch drill chuck with 1/2-inch shank, and wrenches. The tool holders include a turning holder, turning/boring bar holder, 1/2-inch boring bar holder, parting tool holder with cut-off blade, and knurling tool with interchangeable fine, medium, and coarse knurling wheels. The tool post size measures 2.45-inch wide x 1.54-inch high x 3.45-inch deep. Maximum tool bit size is 1/2-inch. read more

Platinum Tools
$15.49

The Platinum 19103 Micro Mini II 13 Piece Screwdriver Set features a combination of the smallest popular bits used in today's elec...tronics. The soft grip TPR handle had a non-mag, 4 mm bit holder that adjusts from 5-Inches to 8-Inches. The bits included in this set are as follows: Slotted 2.0, 1.5, 1.2 and 1.0, Phillips 0000, 000, 00 and 0 and Torx 3, 4, 5 and 6. Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop, manufacture and source the absolute best possible solutions for preparation, installation and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner. “This item is not sold directly by Platinum Tools.” read more

Kole Imports
$65.60

Includes 12 pens per counter top display. Batteries not included. Requires 3 AAA batteries. Tall as pen. Easily slips in pockets a...nd can be constantly handy for those hard-to-see places. Made from plastic and rubber. Black and red color. Weight: 0.10 lbs.. The LED mini flashlight is a convenient, pocket-sized tool and is perfect for toolboxes, glove compartments or drawers. read more

Genuine Mini
$6.65

Complete your tool kit by replacing missing parts with Genuine BMW / MINI. These replacements are exactly what came in your vehicl...e originally and will look and function just like original tools.From the BMW / MINI tool kit. Fits: MINI. read more

Blue Moon Beads
$7.60

This set has 5 different tools that are perfect for beading projects. Included are 1 each of Flat Nose pliers (5" long overall, 1-...1/4" long tips), Long Nose pliers (5" long overall, 1" long tips), Bent Nose pliers (4-3/4" long overall, 1/2" long tips), Round Nose pliers (4-3/4" long overall, 3/4" long tips), and Side Cutters (4-3/8" long overall, 1/2" long cutting surface). All have a spring-action design and a padded grip for extra comfort. Imported. read more

ProjectPartner
$8.10

ProjectPartners are items to be used around the home. Easy to use by the Do-it-yourselfers to complete the projects at home or off...ice. This is a 23 Pc. mini tool set. read more

Kreg Tool
$22.99 $21.46

This Kreg mini jig kit is ideal for applications where the smallest jig possible is requiredUnlimited material thicknessFenceless ...design allows you to make precise angle and stock depth adjustmentsHardened steel drill guideGlass-reinforced Nylon BodyPlug setting guide helps to fully seat wood plugsWorks with a variety of common clamps or any Kreg Face Clamp1/2" to unlimited screw centering abilityKit includes the mini Kreg Jig, stepped drill bit, depth collar and allen wrench read more

General Tools
$21.81 $17.46

This screwdriver set includes: 3/64", 1/16", 5/64" and 3/32" Slotted, #000, #00 and #0 Phillips, T6, T7 and T8 Torx; blade length ...is 1-1/2"Long lasting alloy steel blades in three popular blade styles, Slotted, Phillips and TorxUsed for computer and electronics repair, or any other application where space is limitedErgonomically designed handle with color-coded swivel caps read more

Oregon
$139.00

Oregon Bench Mount Mini-Grinder / Sharpener - 108181 - Compact Alternative To Full Size Grinders Delivers precision results in a v...ery small space Sharpens Many Common Chain Sizes .325 pitch & standard 3/8 pitch (72/73/75 series) chains Also many 1/4, .325, & mini-3/8 pitch chains read more

Tooltron
$10.95

Contains a round nose, flat nose and a chain nose.  World's smallest pliers. For jewelry-making, beading, wire working and mi...niatures. read more

Kreg Tool
$15.99 $12.15

The single drill guide Mini Kreg Jig is Kregs most positionable pocket hole toolThe jig is designed without an alignment fence whi...ch allows it to be clamped at virtually any angle or orientation to the edge of the workpieceGr read more

DEWALT
$119.00

This circular saw with 5150 RPM free speed makes demanding cuts with ease. 5150 RPM free speed makes demanding cuts with ease. Use...s 20V MAX lithium ion 3.0Ah battery not included. 6 1/2in. carbide tipped blade for cutting 2x material at 90, 45 and more... read more

Klein Tools
$29.99 $25.38

This screwdriver has mini cushion-grip handles for superior comfort and gripThe patented tip-indent quickly identifies the type of... screwdriver and tip orientationIt has a precision tip for an exact fitThe premium chrome-plated shafts are for corrosion resistance read more

This item has been added to your list

This item has been added to your sale alerts