Refine By
3NLED
$86.00 $74.99
at Wayfair

Bulb Color Temperature: 4000K 3NLED 40W T10 LED Tube Light Features: -Compatible for AC120V, 277V and 50/60 Hz.-Save energy by 50 ...- 80% and compared with fluorescent tubes.-Instant starting and no delay.-Power factor: 0.95(120V) and 0.9(277V).-No UV,... read more

3NLED
$23.00 $18.99
at Wayfair

Size: 24" H x 1" W x 1" D, Bulb Color Temperature: 4000K 3NLED T8 LED Tube Light Features: -Compatible for AC120V, 277V and 50/60 ...Hz.-Save energy by 50 - 80% and compared with fluorescent tubes.-Instant starting and no delay.-Power factor: 0.95(120V)... read more

Bulbrite
$59.99 $49.99
at eLightBulbs

Bulbrite 4 watt - 120 volt - 12" - T8 - Single Contact Dual (S14S) Base - 2,700K - Warm White - Linestra | Bulbrite LED Light Bulb... (LED/LI4T8/27K 770604) read more

Light Efficient Design

About the Light Efficient Design LED611400UL4SW 48 T8 LED Light Bulb, 120V277V, 19W (120W Equivalent) 3000K Soft White 1400 Lumens... Make an impact on the environment and your wallet by updating your lighting to LED Using LED light bulbs in your home or office will cut your electrical lighting costs up to 7080. On average, LED light bulbs pay for themselves the very first year in electrical savings and reduced maintenance. Imagine not having to change a light bulb for the next 1520 years. The Light Efficient Design LED611400UL4SW is a 48rdquo; tube format bulb that fits standard T8 fixtures as a direct replacement of your existing fluorescent tube bulb. The Bi Pin design fits perfectly and will produce enough light to equal that of a 40W High Output T8, or a 200W Halogen / Incandescent, all while using only 19W of energy. The LED611400UL4SW emits a UVfree spectrum, and the bulb construction is lead and mercury free, for easier disposal (CFLrsquo;s contain lead and mercury). The vibrant spectrum shines at a color temperature of 3000K, which is considered a soft white tone. The overall Lumen Output of the LED611400UL4SW is 1400 Lumens. read more

Bulbrite
$95.99 $79.99
at eLightBulbs

Bulbrite 10 watt - 120 volt - 39" - T8 - Single Contact Dual (S14S) Base - 2,700K - Warm White - Linestra | Bulbrite LED Light Bul...b (LED/LI10T8/27K 770610) read more

Starlights

810 lumens 4500 kelvin 10.26 watts 0.855 amps Voltage Range: 9-25 volts

Halco
$84.71 $70.59
at eLightBulbs

Halco 16 watt - 48" - T8 - Medium Bi-Pin (G13) Base - 4,000K - 700 Series - Cool White - ProLED | Halco LED Light Bulb (T8FR16/740.../LED 80796) read more

Philips
$41.99 $34.99
at eLightBulbs

Philips 8.5 watt - 100/347 volt - 24" - T8 - Medium Bi-Pin (G13) Base - 3,000K - Frosted - Non-Dimmable - InstantFit | Philips LED... Light Bulb (8.5T8/24-3000 IF 452011) read more

Philips
$35.99 $29.99
at eLightBulbs

Philips 16.5 watt - 200/420 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 4,000K - Frosted - Non-Dimmable - InstantFit | Philips LE...D Light Bulb (16.5T8/48-4000 IF 434886) read more

ETi
$47.99 $39.99
at eLightBulbs

ETi 18 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 3,500K - Non-Dimmable - Integral | ETi LED Light Bulb (18T8/35K.../TUBE LED (54108131) 00776) read more

ETi
ETi
$50.39 $41.99
at eLightBulbs

ETi 18 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 3,500K - Non-Dimmable - Internal Driver - Integral | ETi LED Li...ght Bulb (18T8/35K/TUBE 1/2v LED (54104431) 00773) read more

ETi
ETi
$47.99 $39.99
at eLightBulbs

ETi 18 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 5,000K - Non-Dimmable - Integral | ETi LED Light Bulb (18T8/50K.../TUBE LED (54108161) 00763) read more

ETi
Neptun Light

Neptun's DI-88 Series 8-foot LED direct/indirect T8 single pin tube helps save on HVAC costs as it operates at a very low temperat...ure. It's long operation life of up to 70,000 hours helps to cut costs on maintenance and makes the lamp virtually maintenance-free for up to 15 years. Plus it's self-ballasted design allows for easy installation into most common T8 and T12 system fixtures. read more

Neptun Light

Neptun's DI-88 Series LED direct/indirect single pin T8 tubes are made to take the place of T8 or T12 fluorescent lighting systems... with direct/indirect lighting. The tubes are available in a variety of color temperatures and wattages with applications for signs, offices, schools, hospitals, and storage. The lamp features a mercury-free design and a five year warranty. read more

Neptun Light

Upgrade from T8 and T12 fluorescent lighting for signs, storage areas, schools, hospitals and offices with Neptun's DI-88 Series L...ED direct/indirect single pin T8 tubes. The lamp features double-sided optics for both direct/indirect lighting systems, with a frosted non-yellowing polycarbonate lens for an even glow. Enjoy flicker-free light and up to 15 years of maintenance-free operation. read more

Light Efficient Design
$27.59 $22.99
at eLightBulbs

Light Efficient Design 17.2 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 3,000K - Clear | Light Efficient Design LE...D Light Bulb (LED-6114-00-UL-4-NW-N 06414) read more

Sylvania
$200.39 $166.99
at eLightBulbs

Sylvania 22 watt - 48" - Medium Bi-Pin (G13) Base - 3,500K - 800 Series - High Output - Dimmable - Ultra | Sylvania LED Light Bulb... Retrofit Kit (2 Lamp Driver) (LED22T8L48/F/DIM1X2HO/835/UNV 71443) read more

TOGGLED

The TOGGLED 36-inch 14-watt Linear LED Tube Light Bulb is designed to replace traditional T8/T12 Medium Bi-Pin (G13) Base fluoresc...ent tube lighting to lower energy and maintenance costs while enhancing the quality of light in work environments and living spaces. This Cool White (4000K) standard output LED bulb delivers a whiter light for improved color contrast and is the most popular choice for office, store, school, basement, garage and similar lighting applications. Following a simple retrofit process to by-pass the ballast system, TOGGLED LED tubes work within existing fluorescent light fixtures and eliminate ballast replacement cost, buzz noise and light flicker. Proudly designed and assembled in Troy, Michigan U.S.A., TOGGLED's patented, commercial-grade LED tube design uses less energy than traditional fluorescent tubes and is rated for 50,000 hours with a 5-year full warranty. read more

Philips

Philips Instant Fit LED solutions Philips linear LED T8 light bulbs are Instant Fit bulbs that require no modifications to your cu...rrent fixture, no ballast and no rewiring. They are ideal for use in general lighting applications where fluorescent lighting is used, and they are perfect for applications with frequent 'on/off' switching cycles. Use Instant Fit light bulbs in laundry rooms, kitchens, garages, as well as for commercial use in offices, hospitals and retail settings. Unlike fluorescent bulbs, these offer a safe and sustainable solution since they are glass-free, contain no mercury, and operate well in cold temperatures. Perfect for a wide range of applications The Instant Fit line is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with an LED solution. Instant Fit bulbs are true plug-and-play LED solutions that realize an energy savings of up to 40 percent. No modifications to the current fixture and no rewiring are necessary with the Instant Fit design and there is no need for a ballast. Simply plug it in and use. In addition to residential applications, Instant Fit LEDs are perfect for commercial use. Use them in any existing linear fluorescent fixture ? ideal applications for Instant Fit LEDs include office buildings, schools, industrial facilities, hospitals, parking lots, and other public areas. They perform at full light output in spaces with temperatures down to -22 degrees Fahrenheit (- 30 degrees Celsius). The bulbs are glass-free making them ideal for use in food areas and refrigerated food displays. They are great for retail applications since they emit virtually no UV or IR rays, so they will not harm merchandise, fabrics, and furnishings. Sustainable lighting solution that's easy to experience Instant Fit T8 light bulbs are an ideal energy saving alternative to linear fluorescent light bulbs and turn on instantly without flicker or buzz. They fit into existing fixtures without hassle and are compatible with instant start ballasts, eliminating the need for rewiring while also allowing the fixture to maintain its original UL and CSA compliance. Instant Fit LEDs are built with over voltage and over temperature protection and shatterproof polycarbonate material. Unlike traditional linear fluorescent bulbs, Instant Fit LEDs are safe for the environment and contain no mercury, allowing for non-hazardous waste removal. Use Instant Fit T8 LEDs with a lifetime of up to 40,000 hours for a sustainable solution that lasts. Why Instant Fit works Plug and play - Quick installation time, safe with no wiring required ? no professional electrician needed. UL, FCC and CSA certified. Energy savings - Short payback. Delivers 40 percent energy savings. Proven compatibility - Tested to ensure trust and system compatibility with over 100 existing ballast. Features a unique, patented driver. Sustainability - No glass and no mercury, allowing for non-hazardous waste disposal and emits virtually no UV or IR rays. read more

Philips

Philips Instant Fit LED solutions Philips linear LED T8 light bulbs are Instant Fit bulbs that require no modifications to your cu...rrent fixture, no ballast and no rewiring. They are ideal for use in general lighting applications where fluorescent lighting is used, and they are perfect for applications with frequent 'on/off' switching cycles. Use Instant Fit light bulbs in laundry rooms, kitchens, garages, as well as for commercial use in offices, hospitals and retail settings. Unlike fluorescent bulbs, these offer a safe and sustainable solution since they are glass-free, contain no mercury, and operate well in cold temperatures. Perfect for a wide range of applications The Instant Fit line is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with an LED solution. Instant Fit bulbs are true plug-and-play LED solutions that realize an energy savings of up to 40 percent. No modifications to the current fixture and no rewiring are necessary with the Instant Fit design and there is no need for a ballast. Simply plug it in and use. In addition to residential applications, Instant Fit LEDs are perfect for commercial use. Use them in any existing linear fluorescent fixture ? ideal applications for Instant Fit LEDs include office buildings, schools, industrial facilities, hospitals, parking lots, and other public areas. They perform at full light output in spaces with temperatures down to -22 degrees Fahrenheit (- 30 degrees Celsius). The bulbs are glass-free making them ideal for use in food areas and refrigerated food displays. They are great for retail applications since they emit virtually no UV or IR rays, so they will not harm merchandise, fabrics, and furnishings. Sustainable lighting solution that's easy to experience Instant Fit T8 light bulbs are an ideal energy saving alternative to linear fluorescent light bulbs and turn on instantly without flicker or buzz. They fit into existing fixtures without hassle and are compatible with instant start ballasts, eliminating the need for rewiring while also allowing the fixture to maintain its original UL and CSA compliance. Instant Fit LEDs are built with over voltage and over temperature protection and shatterproof polycarbonate material. Unlike traditional linear fluorescent bulbs, Instant Fit LEDs are safe for the environment and contain no mercury, allowing for non-hazardous waste removal. Use Instant Fit T8 LEDs with a lifetime of up to 40,000 hours for a sustainable solution that lasts. Why Instant Fit works Plug and play - Quick installation time, safe with no wiring required ? no professional electrician needed. UL, FCC and CSA certified. Energy savings - Short payback. Delivers 40 percent energy savings. Proven compatibility - Tested to ensure trust and system compatibility with over 100 existing ballast. Features a unique, patented driver. Sustainability - No glass and no mercury, allowing for non-hazardous waste disposal and emits virtually no UV or IR rays. read more

Philips

The Philips InstantFit U-Bent T8 LED light bulb is the easiest way to replace linear fluorescent light bulbs with an LED solution.... An instant start ballasts is required for use, with no modifications to the existing fixture that it houses and no rewiring necessary with this InstantFit design. Using only 16.5-Watt of energy, it is a 55% savings compared to a 32-Watt linear fluorescent bulb. They are ideal for use in general lighting applications where fluorescent lighting is used, and are perfect for applications with frequent "on/off" switching cycles like laundry rooms, kitchens, garages, as well as commercial use in offices and hospitals. Unlike fluorescent bulbs, Philips InstantFit linear T8 LED light bulbs offer a safe and sustainable, solution with durable glass-free design, while operating well in cold temperatures and without containing any mercury. read more

Philips

Philips Instant Fit LED solutions Philips linear LED T8 light bulbs are Instant Fit bulbs that require no modifications to your cu...rrent fixture, no ballast and no rewiring. They are ideal for use in general lighting applications where fluorescent lighting is used, and they are perfect for applications with frequent 'on/off' switching cycles. Use Instant Fit light bulbs in laundry rooms, kitchens, garages, as well as for commercial use in offices, hospitals and retail settings. Unlike fluorescent bulbs, these offer a safe and sustainable solution since they are glass-free, contain no mercury, and operate well in cold temperatures. Perfect for a wide range of applications The Instant Fit line is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with an LED solution. Instant Fit bulbs are true plug-and-play LED solutions that realize an energy savings of up to 40 percent. No modifications to the current fixture and no rewiring are necessary with the Instant Fit design and there is no need for a ballast. Simply plug it in and use. In addition to residential applications, Instant Fit LEDs are perfect for commercial use. Use them in any existing linear fluorescent fixture ? ideal applications for Instant Fit LEDs include office buildings, schools, industrial facilities, hospitals, parking lots, and other public areas. They perform at full light output in spaces with temperatures down to -22 degrees Fahrenheit (- 30 degrees Celsius). The bulbs are glass-free making them ideal for use in food areas and refrigerated food displays. They are great for retail applications since they emit virtually no UV or IR rays, so they will not harm merchandise, fabrics, and furnishings. Sustainable lighting solution that's easy to experience Instant Fit T8 light bulbs are an ideal energy saving alternative to linear fluorescent light bulbs and turn on instantly without flicker or buzz. They fit into existing fixtures without hassle and are compatible with instant start ballasts, eliminating the need for rewiring while also allowing the fixture to maintain its original UL and CSA compliance. Instant Fit LEDs are built with over voltage and over temperature protection and shatterproof polycarbonate material. Unlike traditional linear fluorescent bulbs, Instant Fit LEDs are safe for the environment and contain no mercury, allowing for non-hazardous waste removal. Use Instant Fit T8 LEDs with a lifetime of up to 40,000 hours for a sustainable solution that lasts. Why Instant Fit works Plug and play - Quick installation time, safe with no wiring required ? no professional electrician needed. UL, FCC and CSA certified. Energy savings - Short payback. Delivers 40 percent energy savings. Proven compatibility - Tested to ensure trust and system compatibility with over 100 existing ballast. Features a unique, patented driver. Sustainability - No glass and no mercury, allowing for non-hazardous waste disposal and emits virtually no UV or IR rays. read more

Philips

The Philips InstantFit U-Bent T8 LED light bulb is the easiest way to replace linear fluorescent light bulbs with an LED solution.... An instant start ballasts is required for use, with no modifications to the existing fixture that it houses and no rewiring necessary with this InstantFit design. Using only 16.5-Watt of energy, it is a 55% savings compared to a 32-Watt linear fluorescent bulb. They are ideal for use in general lighting applications where fluorescent lighting is used, and are perfect for applications with frequent "on/off" switching cycles like laundry rooms, kitchens, garages, as well as commercial use in offices and hospitals. Unlike fluorescent bulbs, Philips InstantFit linear T8 LED light bulbs offer a safe and sustainable, solution with durable glass-free design, while operating well in cold temperatures and without containing any mercury. read more

Philips

Philips Instant Fit LED solutions Philips linear LED T8 light bulbs are Instant Fit bulbs that require no modifications to your cu...rrent fixture, no ballast and no rewiring. They are ideal for use in general lighting applications where fluorescent lighting is used, and they are perfect for applications with frequent 'on/off' switching cycles. Use Instant Fit light bulbs in laundry rooms, kitchens, garages, as well as for commercial use in offices, hospitals and retail settings. Unlike fluorescent bulbs, these offer a safe and sustainable solution since they are glass-free, contain no mercury, and operate well in cold temperatures. Perfect for a wide range of applications The Instant Fit line is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with an LED solution. Instant Fit bulbs are true plug-and-play LED solutions that realize an energy savings of up to 40 percent. No modifications to the current fixture and no rewiring are necessary with the Instant Fit design and there is no need for a ballast. Simply plug it in and use. In addition to residential applications, Instant Fit LEDs are perfect for commercial use. Use them in any existing linear fluorescent fixture ? ideal applications for Instant Fit LEDs include office buildings, schools, industrial facilities, hospitals, parking lots, and other public areas. They perform at full light output in spaces with temperatures down to -22 degrees Fahrenheit (- 30 degrees Celsius). The bulbs are glass-free making them ideal for use in food areas and refrigerated food displays. They are great for retail applications since they emit virtually no UV or IR rays, so they will not harm merchandise, fabrics, and furnishings. Sustainable lighting solution that's easy to experience Instant Fit T8 light bulbs are an ideal energy saving alternative to linear fluorescent light bulbs and turn on instantly without flicker or buzz. They fit into existing fixtures without hassle and are compatible with instant start ballasts, eliminating the need for rewiring while also allowing the fixture to maintain its original UL and CSA compliance. Instant Fit LEDs are built with over voltage and over temperature protection and shatterproof polycarbonate material. Unlike traditional linear fluorescent bulbs, Instant Fit LEDs are safe for the environment and contain no mercury, allowing for non-hazardous waste removal. Use Instant Fit T8 LEDs with a lifetime of up to 40,000 hours for a sustainable solution that lasts. Why Instant Fit works Plug and play - Quick installation time, safe with no wiring required ? no professional electrician needed. UL, FCC and CSA certified. Energy savings - Short payback. Delivers 40 percent energy savings. Proven compatibility - Tested to ensure trust and system compatibility with over 100 existing ballast. Features a unique, patented driver. Sustainability - No glass and no mercury, allowing for non-hazardous waste disposal and emits virtually no UV or IR rays. read more

Philips
$237.22
at Amazon

<div class="aplus"> <h4>Philips 434605 14.5-watt Instant Fit 4-Feet T8 LED Tube 4000K Light Bulb</h4><div class="leftImage" style=..."width: 250px;"><div id="image0"><img alt=" " src="http://ecx.images-amazon.com/images/I/31eBVB-HztL.jpg" ><div class="imageCaption">Philips LED T8 InstantFit Bulbs</div></div></div> <div class="rightImage" style="width: 250px;"><div id="image1"><img alt=" " src="http://ecx.images-amazon.com/images/I/21Pc4bTXh5L.jpg" ><div class="imageCaption">A simple replacement</div></div></div> <div class="a-spacing-small" id="text0"><p>Philips 4 ft. Linear LED T8 light bulbs are InstantFit linear bulbs that require no modifications or rewiring to your current fixture housing with instant start ballast, simply plug it in and use. They are ideal for use in general lighting applications where fluorescent lighting is used, and they are perfect for applications with frequent ?on/off? switching cycles. Use InstantFit light bulbs in laundry rooms, kitchens, garages, as well as for commercial use in offices, hospitals and retail settings. Unlike fluorescent bulbs, these offer a safe and sustainable solution since they are glass-free, contain no mercury, and operate well in cold temperatures.</p></div> <h5><div id="header1">Perfect for a wide range of applications</div></h5> <div class="a-spacing-small" id="text1"><p>The InstantFit line is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with an LED solution. InstantFit bulbs are true plug-and-play LED solutions that realize an energy savings of up to 40%. No modifications to the current fixture and no rewiring are necessary with the Instant Fit design, and no need for a new ballast when using instant start ballasts. Simply plug it in and use. In addition to residential applications, InstantFit LEDs are perfect for commercial use. Use them in any existing linear fluorescent fixture ?ideal applications for InstantFit LEDs include office buildings, schools, industrial facilities, hospitals, parking lots, and other public areas. They perform at full light output in spaces with temperatures down to -22 degrees Fahrenheit (- 30 degrees Celsius). The bulbs are glass-free making them ideal for use in food areas and refrigerated food displays. They are great for retail applications since they emit virtually no UV or IR rays so they will not harm merchandise, fabrics, and furnishings.</p></div> <h5><div id="header2">Easy to experience</div></h5> <div class="a-spacing-small" id="text2"><p>InstantFit T8 light bulbs are an ideal energy saving alternative to linear fluorescent light bulbs and turn on instantly without flicker or buzz. They fit into existing fixtures without hassle and are compatible with instant start ballasts, eliminating the need for rewiring while also allowing the fixture to maintain its original UL and CSA compliance. InstantFit LEDs are built with over voltage and over temperature protection and shatterproof polycarbonate material. Unlike traditional linear fluorescent bulbs, InstantFit LEDs contain no mercury, allowing for non-hazardous waste removal. Use InstantFit T8 LEDs with a lifetime of up to 40,000 hours for a sustainable solution that lasts.</p></div> <div class="break"> </div> <br> <h5><div id="header3">Why InstantFit works</div></h5> <div id="list0"><ul><li>Plug and Play - Quick installation time, safe with no wiring required ? no professional electrician needed. UL, FCC and CSA certified.</li><li>Energy Savings - Short pay back. Delivers 40% energy savings.</li><li>Proven Compatibility - Tested to ensure trust and system compatibility with over 100 existing Instant Start ballasts. Features a unique, patented driver.</li><li>Sustainability - No glass and no mercury allowing for non-hazardous waste disposal and emits virtually no UV or IR rays.</li></ul></div> </div> read more

Westinghouse
$40.43 $33.69
at eLightBulbs

Westinghouse 18 watt - 48" - 120/277 volt - T8 - Medium Bi-Pin (G13) Base - 3,500K - Ballast Bypass | Westinghouse LED Light Bulb ...(LED 18T8/48"/35 Ballast Bypass 03660) read more

Sylvania

19 watt - 120/347 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 3,500K - 800 Series - Frosted - Shatterproof - SubstiTUBE | Sylvani...a LED Light Bulb read more

Feit Electric
$23.99
at Wayfair

FeitElectric 120-Volt (5000K) LED Light Bulb This high powered dimmable performance LED gives you full light distribution, has an ...average life of 25,000 hours and is also mercury free. Features: -Color temperature: 5000K.-Lumens: 500 - 800.-Instant on... read more

AXRLED
$265.52
at Amazon

AXRLED 4 ft. LED T8 tube light bulbs are LED replacements for fluorescent tube fixtures that require no rewiring and are compatibl...e with most instant start ballasts. Installation is easy; just plug it in and power on. Switching these LED T8 tubes on and off is instant with no delay and can handle frequent powering on and off with no adverse performance effects. The AXRLED T8 tube line is safe and sustainable while providing optimal lighting at greater energy efficiency. These LED T8 tube fixtures provide the same light output as T8 fluorescent bulbs, with 4x less energy expended. Lasting at an expected 50,000-hour lifespan, these bulbs save maintenance and replacement costs. Containing no glass or mercury, these T8 tubes are environmentally friendly lighting solutions that are safe to dispose and emit no UV rays. AXRLED T8 tubes are ideal for installing anywhere indoors where fluorescents or incandescent fixtures are installed. Office buildings, retail stores, hospitals, parking lots, industrial and manufacturing plants are a few places where the AXRLED T8's can be plugged in immediately. read more

Feit Electric
$48.99
at Wayfair

FeitElectric 120-Volt (3000K) LED Light Bulb This high powered dimmable performance LED gives you full light distribution, has an ...average life of 25,000 hours and is also mercury free. Features: -Color temperature: 3000K.-Lumens: 1100 - 1600.-Instant... read more

Feit Electric
$48.99
at Wayfair

Wattage: 14 FeitElectric 120-Volt (3000K) LED Light Bulb This high powered dimmable performance LED gives you full light distribut...ion, has an average life of 25,000 hours and is also mercury free. Features: -Color temperature: 3000K.-Lumens: 1100 -... read more

Feit Electric
$49.99
at Wayfair

FeitElectric 120-Volt (5000K) LED Light Bulb This high powered dimmable performance LED gives you full light distribution, has an ...average life of 25,000 hours and is also mercury free. Features: -Color temperature: 5000K.-Lumens: 1100 - 1600.-Instant... read more

Feit Electric
$99.99 $90.95
at Wayfair

FeitElectric 120-Volt (3000K) LED Light Bulb This high powered 3 way lumens dimmable performance LED is a direct replacement for A...19. This omni directional A19 gives you a full light distribution. It has an average life of 25,000 Hours. It is also RoHS... read more

Bulbrite
$80.99
at Wayfair

Bulbrite Industries 15W LED Light Bulb Bulbrite's Norm LED retrofit bulbs set the new Norm in lighting. Norm LEDs feature a true t...o incandescent shape, superior light quality, are fully dimmable, and eligible for rebate dollars from local utility... read more

Bulbrite
$51.99 $35.99
at Wayfair

Bulbrite Industries 6W LED Light Bulb Bulbrite's Norm LED retrofit bulbs set the new Norm in lighting. Norm LEDs feature a true to... incandescent shape, superior light quality, are fully dimmable, and eligible for rebate dollars from local utility... read more

NorthernInternational
$40.70 $33.99
at Wayfair

NorthernInternational 1W LED Light Bulb Features: -Bulb type: Replacement LED MR16 bulb.-Up to 85% less energy consumption than re...gular bulb.-One time high power Low Voltage bulb.-LED lasts 20 times longer than traditional bulbs.-Cast aluminum... read more

LongStar
$35.99 $29.99
at eLightBulbs

LongStar 20 watt - 48" - T8 - Medium Bi-Pin (G13) Base - 4,100K - Cool White - Non-Dimmable | LongStar LED Light Bulb (GT8-20W-41K...-120-CL 00050) read more

naturaLED
$53.03 $44.19
at eLightBulbs

naturaLED 18 watt - 120/277 volt - T8 - Medium Bi-Pin (G13) Base - 4,100K - 700 Series | naturaLED LED Light Bulb (LHO-18T8/741 56...48 05648) read more

Bulbrite
$49.00 $31.45
at Wayfair

Bulbrite Industries 8W LED Light Bulb Bulbrite's Norm LED retrofit bulbs set the new Norm in lighting. Norm LEDs feature a true to... incandescent shape, superior light quality, are fully dimmable, and eligible for rebate dollars from local utility... read more

HyLite
$39.95 $33.29
at eLightBulbs

HyLite 18 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 5,000K - Daylight - Frosted | HyLite LED Light Bulb (HL-T8-4...F-18W-50K 77007) read more

Philips
$30.23 $25.19
at eLightBulbs

Philips 10 watt - 100/277 volt - 24" - T8 - Medium Bi-Pin (G13) Base - 4,000K - Frosted - Non-Dimmable - CorePro | Philips LED Lig...ht Bulb (10T8/COREPRO/24-4000K/FR/UNV 429829) read more

Green Creative
$32.99 $27.49
at eLightBulbs

Green Creative 15 watt - 48" - 120/277 volt - T8 - Medium Bi-Pin (G13) Base - 3,500K - 800 Series - Neutral White - Titanium - BYP... | Green Creative LED Light Bulb (15T8G4/4F/835/BYP 40781) read more

Green Creative
$38.99 $32.49
at eLightBulbs

Green Creative 9 watt - 24" - 120/277 volt - T8 - Medium Bi-Pin (G13) Base - 4,000K - 800 Series - Titanium | Green Creative LED L...ight Bulb (9T8/2F/840 40669) read more

Sylvania
$50.15 $41.79
at eLightBulbs

Sylvania 10 watt - 120/347 volt - 24" - T8 - Medium Bi-Pin (G13) Base - 4,100K - Frosted - SubstiTUBE | Sylvania LED Light Bulb (L...ED10T8/L24/F/841/SUB 73686) read more

naturaLED
$29.03 $24.19
at eLightBulbs

naturaLED 14 watt - 120/277 volt - 48" - T8 - Medium Bi-Pin (G13) Base - 5,000K - 800 Series - Frosted - Non-Dimmable | naturaLED ...LED Light Bulb (LED14T8/FR17/850 5818 05818) read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping