Refine By

LCN Hardware

LCN
$279.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston. double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$400.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$212.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$212.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever arm, includes a parallel arm shoe, has an aluminum powder coated... finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$367.00
at Amazon

<div class="aplus"><p>The LCN 4010 door closer has a right-handed, double lever arm, an aluminum powder coated finish, and is for ...use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular mount. The door closer is right-handed for installation on doors with hinges on the right side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>140 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4010 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$279.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm, includes a parallel arm shoe, has a dark bronze powder coat...ed finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$367.00
at Amazon

<div class="aplus"><p>The LCN 4010 door closer has a left-handed, double lever arm, a dark bronze powder coated finish, and is for... use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular mount. The door closer is left-handed for installation on doors with hinges on the left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>140 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4010 series hydraulic cylinder</li><li>Standard double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$235.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$325.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm with a built-in stop, includes a parallel arm shoe, has a da...rk bronze powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm has a built-in stop that limits door sweep to 110 degrees to protect adjacent walls. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Cush-n-stop double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$459.00
at Amazon

<div class="aplus"><p>The LCN 4110 door closer has a double lever, left-handed parallel arm made of forged steel, a spring-loaded ...stop, an aluminum powder coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm must be installed for a low-profile, parallel arm mount. The arm is made of forged steel for high traffic settings, and has a spring-loaded stop that provides a cushioned limit to door sweep to 110 degrees to protect adjacent walls. The door closer is left-handed, for installation on doors with hinges on the left side, and includes a plastic cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4110 series hydraulic cylinder</li><li>Forged steel, spring loaded double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: screw spacer, self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$411.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever, forged steel arm, has an aluminum powder coated finish, and is ...for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm is made of forged steel for high traffic settings, and can be installed for a regular or a top-of-jamb mount. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Extra duty double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$431.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>120 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$235.00
at Amazon

<div class="aplus"><p>The LCN 1260 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has an aluminum po...wder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 5 for interior doors up to 54" wide, or exterior doors up to 42" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>26" to 54"</td></tr><tr><td>Exterior door width</td><td>26" to 42"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1260 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$367.00
at Amazon

<div class="aplus"><p>The LCN 4110 door closer has a double lever, right-handed parallel arm made of forged steel, a dark bronze p...owder coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm must be installed for a low-profile, parallel arm mount. The arm is made of forged steel for high traffic settings. The door closer is right-handed, for installation on doors with hinges on the right side, and includes a plastic cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4110 series hydraulic cylinder</li><li>Forged steel double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: screw spacer, self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$325.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever arm with a built-in stop, includes a parallel arm shoe, has an a...luminum powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm has a built-in stop that limits door sweep to 110 degrees to protect adjacent walls. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Cush-n-stop double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$397.00
at Amazon

<div class="aplus"><p>The LCN 4110 door closer has a double lever, left-handed parallel arm made of forged steel, a delayed action... cylinder, an aluminum powder coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm must be installed for a low-profile, parallel arm mount. The arm is made of forged steel for high traffic settings. The cylinder has a delayed action function that holds the door open, adjustable up to 60 seconds, for additional time to pass through before closing. The door closer is left-handed, for installation on doors with hinges on the left side, and includes a plastic cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The aluminum powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4110 series delayed action hydraulic cylinder</li><li>Forged steel double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: screw spacer, self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$534.00
at Amazon

<div class="aplus"><p>The LCN 4040 door closer has a double lever, hold-open arm with a spring-loaded stop, has a dark bronze powd...er coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, wide bearings for increased load capacity, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, and has a spring-loaded stop that provides a cushioned limit to door sweep to 110 degrees to protect adjacent walls. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston, double heat treated steel pinion, and wide bearings</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, or top jamb (push)</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>110 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4040 series hydraulic cylinder</li><li>Spring loaded, hold-open double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$302.00
at Amazon

<div class="aplus"><p>The LCN 1460 door closer has a double lever, hold-open arm, includes a parallel arm shoe, has a dark bronze ...powder coated finish, and is for use in medium duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston for resistance to wear, and is certified for 1.5 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm can be installed for a regular or a top-of-jamb mount, or for a parallel arm mount with the included parallel arm shoe. The arm's hold-open feature will hold the door in an open position when engaged. The door closer is non-handed, for installation on doors with hinges on the right or left side, and includes a plastic cylinder cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston</td></tr><tr><td>Arm construction</td><td>Forged steel main arm, stamped steel forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Hinge (pull) side, top jamb (push), or parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>1.5 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>1460 series hydraulic cylinder</li><li>Hold-open double lever arm</li><li>Parallel arm shoe</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: thru-bolt with self-reaming and tapping screws</li></ul></div> read more

LCN
LCN
$397.00
at Amazon

<div class="aplus"><p>The LCN 4110 door closer has a double lever, left-handed parallel arm made of forged steel, a delayed action... cylinder, a dark bronze powder coated finish, and is for use in heavy duty applications on interior or exterior doors. The hydraulic cylinder is made of cast iron, has a forged steel piston and double heat treated steel pinion for resistance to wear, and is certified for 10 million cycles. All-weather hydraulic fluid helps reduce the need for seasonal adjustment. The double lever arm must be installed for a low-profile, parallel arm mount. The arm is made of forged steel for high traffic settings. The cylinder has a delayed action function that holds the door open, adjustable up to 60 seconds, for additional time to pass through before closing. The door closer is left-handed, for installation on doors with hinges on the left side, and includes a plastic cover. The spring force required to open the door is adjustable from sizes 1 to 6 for interior doors up to 60" wide, or exterior doors up to 48" wide, to help comply with the Americans with Disabilities Act (ADA) when properly installed. The dark bronze powder coat finish helps provide resistance to corrosion. The door closer meets American National Standards Institute (ANSI)/Builders Hardware Manufacturers Association (BHMA) A156.4 grade 1 standards for commercial buildings. It is also Underwriters Laboratories (UL) listed for a 3-hour fire rating, and complies with the UL 10C positive pressure fire test.</p><table border="1" width="800" cellpadding="2" cellspacing="0"><tbody><tr bgcolor="#DFE1E0"><th colspan="2" align="left"><b>Specifications</b></th></tr><tr><td>Cylinder</td><td>Cast iron with forged steel piston and double heat treated steel pinion</td></tr><tr><td>Arm construction</td><td>Forged steel main arm and forearm</td></tr><tr><td>Cover</td><td>Plastic</td></tr><tr><td>Mounting</td><td>Parallel arm</td></tr><tr><td>Interior door width</td><td>24" to 60"</td></tr><tr><td>Exterior door width</td><td>24" to 48"</td></tr><tr><td>Maximum door opening</td><td>180 degrees</td></tr><tr><td>ANSI/BHMA grade</td><td>Grade 1</td></tr><tr><td>Cycles</td><td>10 million</td></tr><tr><td>UL compliance</td><td>3-hour fire rating, UL 10C</td></tr></tbody></table><br/><p>Commercial grade door closers mechanically return a door to closure for security, conservation of heating and cooling, and fire safety. A hydraulic cylinder attached to an arm regulates the speed of closure with separate adjustments for the door's sweep and latch (the final 10 degrees) phases of movement, and backcheck for opening resistance to protect walls and guard against wind gusts. Single lever (also called track) arms maintain a low profile when installed on either side of a door, while double lever arms provide greater mechanical efficiency. In either a regular mount (on the hinge, or pull, side of the door) or a top jamb mount (on the reverse, or push side), the double lever arm projects perpendicular to the door. A parallel arm mount must be installed on the push side, for the double lever arm to occupy the recess of the door frame when at rest for a low profile. </p><p>LCN manufactures door closers and other door hardware products. The company, founded in 1926, is headquartered in Princeton, IL.</p><h4>What's in the Box?</h4><ul><li>4110 series delayed action hydraulic cylinder</li><li>Forged steel double lever arm</li><li>Plastic cylinder cover</li><li>Peel-n-stick installation template</li><li>Fastener pack: screw spacer, self-reaming and tapping screws</li></ul></div> read more

LCN
View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping