Refine By
Kraus
$239.95 $600.00
at FaucetDirect

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (50/50 split) 33 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 33 (measured from the left outer rim to the right outer)Basin Width (Left): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Length (Left): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Length (Right): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 9 (measured from the center of basin to the rim)Basin Depth (Right): 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sh read more

Kraus
$239.95 $600.00
at FaucetDirect

Product Features: Fully covered under Kraus limited lifetime warranty Constructed of 18 gauge premium grade T-304 stainless steel ...- guaranteed to never rust or corrode Commercial-grade satin finish - highly scratch and stain resistant Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use Double bowl (60/40 split) 33 sink with traditional rounded corners Extra deep (9 depth) design is perfect for the semi-professional kitchen Undermount installation; fits 37+ cabinets Standard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator) Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim) Overall Width: 22 (measured from the back outer rim to the front outer rim) Overall Length: 33 (measured from the left outer rim to the right outer) Basin Width (Left): 18-3/4 (measured from the back inner rim to the front inner rim) Basin Width (Right): 16-1/2 (measured from the back inner rim to the front inner rim) Basin Length (Left): 15-3/4 (measured from the left inner rim to the right inner rim) Basin Length (Right): 16-1/2 (measured from the left inner rim to the right inner rim) Basin Depth (Left): 9 (measured from the center of basin to the rim) Basin Depth (Right): 8 (measured from the center of basin to the rim) Installation Type: Drop in Number of Faucet Holes: 1 Drain Outlet Connection: 3-1/2 Minimum Base Cabinet Width: 37 What s Included: Kraus 18 gauge Stainless Steel sink Stainless steel basket strainer (sink drain assembly) Mounting and installation brackets Sink cut read more

Kraus
$419.95 $983.35
at FaucetDirect

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 30 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus
$399.95 $938.35
at FaucetDirect

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 29-3/4 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 34+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20 (measured from the back outer rim to the front outer rim)Overall Length: 29-3/4 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 27 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 34What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generall read more

Kraus
$199.95 $500.00
at FaucetDirect

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 25 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 29+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 25 (measured from the left outer rim to the right outer)Basin Width: 15-7/10 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/4 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 29What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generally much easier read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 30 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 33 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 22-2/5 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 27+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 25 (measured from the back outer rim to the front outer rim)Overall Length: 22-2/5 (measured from the left outer rim to the right outer)Basin Width: 18-7/8 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/2 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 27What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 29-3/4 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 34+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20 (measured from the back outer rim to the front outer rim)Overall Length: 29-3/4 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 27 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 34What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generall read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 17-2/5 (measured from the left inner rim to the right inner rim)Basin Length (Right): 11-7/10 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo</li read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 19 (measured from the left inner rim to the right inner rim)Basin Length (Right): 13 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpec read more

Kraus

Product Features: Fully covered under Kraus limited lifetime warranty Constructed of 18 gauge premium grade T-304 stainless steel ...- guaranteed to never rust or corrode Commercial-grade satin finish - highly scratch and stain resistant Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use Double bowl (60/40 split) 33 sink with traditional rounded corners Extra deep (9 depth) design is perfect for the semi-professional kitchen Undermount installation; fits 37+ cabinets Standard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator) Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim) Overall Width: 22 (measured from the back outer rim to the front outer rim) Overall Length: 33 (measured from the left outer rim to the right outer) Basin Width (Left): 18-3/4 (measured from the back inner rim to the front inner rim) Basin Width (Right): 16-1/2 (measured from the back inner rim to the front inner rim) Basin Length (Left): 15-3/4 (measured from the left inner rim to the right inner rim) Basin Length (Right): 16-1/2 (measured from the left inner rim to the right inner rim) Basin Depth (Left): 9 (measured from the center of basin to the rim) Basin Depth (Right): 8 (measured from the center of basin to the rim) Installation Type: Drop in Number of Faucet Holes: 1 Drain Outlet Connection: 3-1/2 Minimum Base Cabinet Width: 37 What s Included: Kraus 18 gauge Stainless Steel sink Stainless steel basket strainer (sink drain assembly) Mounting and installation brackets Sink cut read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 22-2/5 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 27+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 25 (measured from the back outer rim to the front outer rim)Overall Length: 22-2/5 (measured from the left outer rim to the right outer)Basin Width: 18-7/8 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/2 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 27What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, read more

Kraus

Update your kitchen decor with this 33-inch double-bowl farmhouse sinkBasin is handmade from heavy duty 16 gauge 304 surgical stai...nless steelApron front kitchen sink is split 60/40 with the larger bowl on the left side read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (50/50 split) 33 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 33 (measured from the left outer rim to the right outer)Basin Width (Left): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Length (Left): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Length (Right): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 9 (measured from the center of basin to the rim)Basin Depth (Right): 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sh read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 11-5/8 (measured from the left inner rim to the right inner rim)Basin Length (Right): 17-3/8 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 25 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 29+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 25 (measured from the left outer rim to the right outer)Basin Width: 15-7/10 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/4 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 29What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generally much easier read more

Kraus

Product Features: Fully covered under Kraus limited lifetime warranty Constructed of 18 gauge premium grade T-304 stainless steel ...- guaranteed to never rust or corrode Commercial-grade satin finish - highly scratch and stain resistant Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use Double bowl (60/40 split) 33 sink with traditional rounded corners Extra deep (9 depth) design is perfect for the semi-professional kitchen Undermount installation; fits 37+ cabinets Standard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator) Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim) Overall Width: 22 (measured from the back outer rim to the front outer rim) Overall Length: 33 (measured from the left outer rim to the right outer) Basin Width (Left): 18-3/4 (measured from the back inner rim to the front inner rim) Basin Width (Right): 16-1/2 (measured from the back inner rim to the front inner rim) Basin Length (Left): 15-3/4 (measured from the left inner rim to the right inner rim) Basin Length (Right): 16-1/2 (measured from the left inner rim to the right inner rim) Basin Depth (Left): 9 (measured from the center of basin to the rim) Basin Depth (Right): 8 (measured from the center of basin to the rim) Installation Type: Drop in Number of Faucet Holes: 1 Drain Outlet Connection: 3-1/2 Minimum Base Cabinet Width: 37 What s Included: Kraus 18 gauge Stainless Steel sink Stainless steel basket strainer (sink drain assembly) Mounting and installation brackets Sink cut read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 17-2/5 (measured from the left inner rim to the right inner rim)Basin Length (Right): 11-7/10 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo</li read more

Kraus
$449.95 $784.57
at FaucetDirect.com

Kraus, KHF200-30, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 29-3/4" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 34+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20" (measured from the back outer rim to the front outer rim)Overall Length: 29-3/4" (measured from the left outer rim to the right outer)Basin Width: 16" (measured from the back inner rim to the front inner rim)Basin Length: 27" read more

Kraus
$413.94 $639.09
at FaucetDirect.com

Kraus, KHF203-33, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4" (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10" (measured from the left outer rim to the right outer)Basin Width (Left): 16" (measured from the back inner rim to the front i read more

Kraus
$469.95 $820.44
at FaucetDirect.com

Kraus, KHF200-33, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4" (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10" (measured from the left outer rim to the right outer)Basin Width: 16" (measured from the back inner rim to the front inner rim)Basin Length read more

Kraus
$539.95 $941.99
at FaucetDirect.com

Kraus, KHF203-36, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4" (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10" (measured from the left outer rim to the right outer)Basin Width (Left): 16" (measured from the back inner rim to the front i read more

Kraus
$470.00 $783.33
at FaucetDirect.com

Kraus, KHF200-36, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4" (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10" (measured from the left outer rim to the right outer)Basin Width: 16" (measured from the back inner rim to the front inner rim)Basin Length read more

Kraus
$499.95 $870.23
at FaucetDirect.com

Kraus, KHF204-33, Kitchen Sink,Stainless Steel, Kitchen Sink, Fixture, Stainless Steel Product Features:Fully covered under Kraus ...limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10" sink with modern 3/4? radius cornersExtra deep (10" depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+" cabinetsStandard 3-1/2" drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10" ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4" (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10" (measured from the left outer rim to the right outer)Basin Width (Left): 16" (measured from the back inner rim to the front i read more

Kraus

Product Features: Fully covered under Kraus limited lifetime warranty Constructed of 18 gauge premium grade T-304 stainless steel ...- guaranteed to never rust or corrode Commercial-grade satin finish - highly scratch and stain resistant Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use Double bowl (60/40 split) 33 sink with traditional rounded corners Extra deep (9 depth) design is perfect for the semi-professional kitchen Undermount installation; fits 37+ cabinets Standard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator) Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim) Overall Width: 22 (measured from the back outer rim to the front outer rim) Overall Length: 33 (measured from the left outer rim to the right outer) Basin Width (Left): 18-3/4 (measured from the back inner rim to the front inner rim) Basin Width (Right): 16-1/2 (measured from the back inner rim to the front inner rim) Basin Length (Left): 15-3/4 (measured from the left inner rim to the right inner rim) Basin Length (Right): 16-1/2 (measured from the left inner rim to the right inner rim) Basin Depth (Left): 9 (measured from the center of basin to the rim) Basin Depth (Right): 8 (measured from the center of basin to the rim) Installation Type: Drop in Number of Faucet Holes: 1 Drain Outlet Connection: 3-1/2 Minimum Base Cabinet Width: 37 What s Included: Kraus 18 gauge Stainless Steel sink Stainless steel basket strainer (sink drain assembly) Mounting and installation brackets Sink cut read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 29-3/4 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 34+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20 (measured from the back outer rim to the front outer rim)Overall Length: 29-3/4 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 27 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 34What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generall read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 22-2/5 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 27+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 25 (measured from the back outer rim to the front outer rim)Overall Length: 22-2/5 (measured from the left outer rim to the right outer)Basin Width: 18-7/8 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/2 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 27What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (50/50 split) 33 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 33 (measured from the left outer rim to the right outer)Basin Width (Left): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16-1/4 (measured from the back inner rim to the front inner rim)Basin Length (Left): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Length (Right): 14-1/2 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 9 (measured from the center of basin to the rim)Basin Depth (Right): 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sh read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 25 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 29+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 25 (measured from the left outer rim to the right outer)Basin Width: 15-7/10 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/4 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 29What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generally much easier read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 30 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 33 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 17-2/5 (measured from the left inner rim to the right inner rim)Basin Length (Right): 11-7/10 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo</li read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 11-5/8 (measured from the left inner rim to the right inner rim)Basin Length (Right): 17-3/8 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 19 (measured from the left inner rim to the right inner rim)Basin Length (Right): 13 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpec read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 33 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 30 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 33 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 19 (measured from the left inner rim to the right inner rim)Basin Length (Right): 13 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpec read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 17-2/5 (measured from the left inner rim to the right inner rim)Basin Length (Right): 11-7/10 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo</li read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 25 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 29+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 22 (measured from the back outer rim to the front outer rim)Overall Length: 25 (measured from the left outer rim to the right outer)Basin Width: 15-7/10 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/4 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 29What s Included:Kraus 18 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generally much easier read more

Kraus

Product Features: Fully covered under Kraus limited lifetime warranty Constructed of 18 gauge premium grade T-304 stainless steel ...- guaranteed to never rust or corrode Commercial-grade satin finish - highly scratch and stain resistant Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use Double bowl (60/40 split) 33 sink with traditional rounded corners Extra deep (9 depth) design is perfect for the semi-professional kitchen Undermount installation; fits 37+ cabinets Standard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator) Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim) Overall Width: 22 (measured from the back outer rim to the front outer rim) Overall Length: 33 (measured from the left outer rim to the right outer) Basin Width (Left): 18-3/4 (measured from the back inner rim to the front inner rim) Basin Width (Right): 16-1/2 (measured from the back inner rim to the front inner rim) Basin Length (Left): 15-3/4 (measured from the left inner rim to the right inner rim) Basin Length (Right): 16-1/2 (measured from the left inner rim to the right inner rim) Basin Depth (Left): 9 (measured from the center of basin to the rim) Basin Depth (Right): 8 (measured from the center of basin to the rim) Installation Type: Drop in Number of Faucet Holes: 1 Drain Outlet Connection: 3-1/2 Minimum Base Cabinet Width: 37 What s Included: Kraus 18 gauge Stainless Steel sink Stainless steel basket strainer (sink drain assembly) Mounting and installation brackets Sink cut read more

Kraus

Product Features: Fully covered under Kraus limited lifetime warrantyConstructed of 18 gauge premium grade T-304 stainless steel -... guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 22-2/5 sink with traditional rounded cornersExtra deep (9 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 27+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications: Height: 9 ( measured from the bottom of sink to the top of the rim)Overall Width: 25 (measured from the back outer rim to the front outer rim)Overall Length: 22-2/5 (measured from the left outer rim to the right outer)Basin Width: 18-7/8 (measured from the back inner rim to the front inner rim)Basin Length: 21-1/2 (measured from the left inner rim to the right inner rim)Basin Depth: 9 (measured from the center of basin to the rim)Installation Type: Drop inNumber of Faucet Holes: 3Drain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 27What s Included: Kraus 18 gauge Stainless Steel sinkStainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay: Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 19 (measured from the left inner rim to the right inner rim)Basin Length (Right): 13 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpec read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 29-3/4 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 34+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20 (measured from the back outer rim to the front outer rim)Overall Length: 29-3/4 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 27 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 34What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is generall read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 30 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 19 (measured from the left inner rim to the right inner rim)Basin Length (Right): 13 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpec read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useDouble bowl (60/40 split) 32-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 37+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 32-9/10 (measured from the left outer rim to the right outer)Basin Width (Left): 16 (measured from the back inner rim to the front inner rim)Basin Width (Right): 16 (measured from the back inner rim to the front inner rim)Basin Length (Left): 17-2/5 (measured from the left inner rim to the right inner rim)Basin Length (Right): 11-7/10 (measured from the left inner rim to the right inner rim)Basin Depth (Left): 10 (measured from the center of basin to the rim)Basin Depth (Right): 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 37What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logo</li read more

Kraus

Product Features:Fully covered under Kraus limited lifetime warrantyConstructed of 16 gauge premium grade T-304 stainless steel - ...guaranteed to never rust or corrodeCommercial-grade satin finish - highly scratch and stain resistantPadded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in useSingle bowl 35-9/10 sink with modern 3/4? radius cornersExtra deep (10 depth) design is perfect for the semi-professional kitchenUndermount installation; fits 40+ cabinetsStandard 3-1/2 drain opening compatible with most garbage disposal units (included InSinkErator)Product Specifications:Height: 10 ( measured from the bottom of sink to the top of the rim)Overall Width: 20-3/4 (measured from the back outer rim to the front outer rim)Overall Length: 35-9/10 (measured from the left outer rim to the right outer)Basin Width: 16 (measured from the back inner rim to the front inner rim)Basin Length: 33 (measured from the left inner rim to the right inner rim)Basin Depth: 10 (measured from the center of basin to the rim)Installation Type: Undermount, farmhouseDrain Outlet Connection: 3-1/2Minimum Base Cabinet Width: 40What s Included:Kraus 16 gauge Stainless Steel sinkStainless steel bottom dish grid (basin rack)Stainless steel basket strainer (sink drain assembly)Mounting and installation bracketsSink cutout template (for countertop cut dimensions)Dish towel with Kraus logoSpecification Sheet / Installation GuideAdvantages of Stainless Steel over Enameled Cast Iron or Fireclay:Very durable; will never chip or crackDishes usually don t break when dropped during dish washingDue to relative weights, stainless steel is ge read more

Kraus
$269.95 $630.00
at Wayfair

Kraus KGD-433B Crafted from 80% natural granite, Kraus granite sinks feature the look, feel and texture of natural stone. A therma...l finishing process results in a tough, nonporous surface that is resistant to heat, chemicals, scratching, chipping and discoloration that will stand up to a lifetime of use. With a variety of size, bowl configuration and installation options a Kraus granite sink can make a sleek and functional addition to any kitchen. Features: -Material: Granite.-Crafted with 80% natural granite that looks and feels like natural stone.-Highly heat resistant.-Non-porous surface is hygienic and easy to clean.-Stone-like material is sound absorbing and allowing for more quiet use.-Double bowl design is versatile for multitasking.-Rear set drain increases work surface and allows for additional under-sink storage.-Compatible with most garage disposals.-Finish: Black onyx.-Drop in sink is self-rimming for finished look.-Installation Type: Drop-in.-Finish: Black.-Distressed: No.-Material: Stone.-Number of Basins: 2.-Sink Shape: Rectangular.-Number of Faucet Holes: 1.Dimensions: -Standard 3.5'' drain opening.-Overall 33.5 L x 22 W x 9.5 D, 40.7 lbs.-Overall Sink Depth - Top to Bottom: 9.5.-Exterior Sink Length - Side to Side: 33.5.-Exterior Sink Width - Front to Back: 22.-Basin Depth - Top to Bottom: 9.5.-Overall Product Weight: 40.7.Warranty: -Manufacturer provides limited lifetime warranty. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping