Refine By
Jet

For use with JET milling/drilling machines Item#s 144553 and 144554. Application Milling.. Model Number: 660012

Jet
Jet
$1,099.99
at CPO Jet

J-3800P 1 Square Drive Impact Wrench Pistol GripJet impact wrenches are available in impact resistant aluminum or lightweight carb...on composite housings. Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet 505976 Features:Unique pinless hammer provides for stabilityDistinctive clutch design generates maximum powerVariable speed teasing throttleBuilt-in regulatorIncredible power-to-weight ratioCushioned grip dead handleSide-mounted bumper guardsJet 505976 Specifications:Warranty: 2 yearHeight: 10Width: 17Length: 24Product weight: 97.5 lbsNo load rpm: 4,700Air pressure: 90 psiAir consumption: 57 cfmAir inlet : 1/2Air hose inner diameter: 1/2Vibration value: 8 m/s2Square drive: 1Bolt capacity: 1-1/2Anvil retainer type: ringWeight capacity: 19,841 lbsMax lift height: 10Standard lift: 10 read more

Jet
Jet
$119.99
at CPO Jet

1/4 Impact Wrench 11000 RPMJet impact wrenches are available in impact resistant aluminum or lightweight carbon composite housings.... Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet JSM-4072 Features:Ergonomic grip for increased operator comfortJet JSM-4072 Specifications:Warranty: 1 yearHeight: 1.89Width: 5.45Length: 9.37Product weight: 2.13 lbsNo load rpm: 11,000Air pressure: 90 psiAir consumption: 4 cfmAir inlet : 1/4Air hose inner diameter: 3/8Vibration value: 5-1/5 m/s2Noise level: 83 dbSquare drive: 1/4Bolt capacity: 3/8Anvil retainer type: ringFree speed: 11,000 rpmMax torque: 75 pound-force foot read more

Jet
Jet
$219.99
at CPO Jet

1/2 Impact Wrench 7000 RPMJet impact wrenches are available in impact resistant aluminum or lightweight carbon composite housings.... Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet JSM-4340 Features:Ergonomic grip for increased operator comfortMultiple torque setting available with easy to use dial on back of impact wrenchHeavy-duty ball bearing constructionRotating air inlet keeps air hose twist freeSuper lightweight composite designAll models feature powerful twin hammer mechanismJet JSM-4340 Specifications:Warranty: 1 yearHeight: 2.99Width: 7.68Length: 8.94Product weight: 5 lbsNo load rpm: 7,000Air pressure: 90 psiAir consumption: 4-1/2 cfmAir inlet : 1/4Air hose inner diameter: 3/8Vibration value: 2-4/5 m/s2Noise level: 88 dbSquare drive: 1/2Bolt capacity: 3/4Anvil retainer type: ringFree speed: 7,000 rpmMax torque: 600 pound-force foot read more

Jet
Jet
$254.99
at CPO Jet

1/2 Mini Impact Wrench 9000 RPMThere s might in the mini with the jsM-4341 impact wrench. Weighing just under 2.76 pounds with a 7...-inch profile, this tool packs the same punch of standard-size impact wrenches but gets in tighter spaces. It s built tough, too, with heavy-duty ball-bearing construction that handles the toughest assembly and disassembly jobs. This ratchet also features a comfortable grip, low noise volume and easy adjustment of torque setting. It s all good; it s all Jet.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet JSM-4341 Features:Multiple torque setting available with easy to use dial on back of impact wrenchHeavy-duty ball bearing constructionRotating air inlet keeps air hose twist freeLow noise volumeSuper lightweight composite designAll models feature powerful twin hammer mechanismJet JSM-4341 Specifications:Warranty: 1 yearHeight: 2.46Width: 6.29Length: 8.36Product weight: 3.02 lbsNo load rpm: 9,000 read more

Jet
Jet
$124.99
at CPO Jet

1/2 in. 150 RPM Air Ratchet Wrench - JSM-3430. Heavy-duty ball and needle bearing construction for durability. Hardened steel gear...s extend tool life. Full gear cage construction increasing durability. Ergonomically designed grip for reduced operator fatigue. Built in air regulator for precise control. Exhaust silencer provides quiet operation. Swivel air inlet increases maneuverability and decreases hose tangles. Industrial duty air motor for increased power. Variable speed lever throttle for precise control read more

Jet
Jet
$1,199.99
at CPO Jet

J-3800D 1 Square Drive Impact Wrench D-HandleJet impact wrenches are available in impact resistant aluminum or lightweight carbon ...composite housings. Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet 505977 Features:Twin hammer clutch provides superior torqueDistinctive clutch design generates maximum powerVariable speed teasing throttleBuilt-in regulatorIncredible power-to-weight ratioCushioned grip dead handleSide-mounted bumper guardsJet 505977 Specifications:Warranty: 2 yearHeight: 10Width: 17Length: 24Product weight: 112.5 lbsNo load rpm: 4,700Air pressure: 90 psiAir consumption: 57 cfmAir inlet : 1/2Air hose inner diameter: 1/2Vibration value: 8 m/s2Square drive: 1Bolt capacity: 1-1/2Anvil retainer type: ringWeight capacity: 19,841 lbsMax lift height: 15Standard lift: 15 read more

Jet
Jet
$49.99
at CPO Jet

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable{mso-style-name:Table Normal;mso...-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-parent:;mso-padding-alt:0in 5.4pt 0in 5.4pt;mso-para-margin:0in;mso-para-margin-bottom:.0001pt;mso-pagination:widow-orphan;font-size:10.0pt;font-family:Times New Roman;mso-ansi-language:#0400;mso-fareast-language:#0400;mso-bidi-language:#0400;}JET 587836 Bolt CuttersFor cutting concrete reinforcing rods (rebar), mediumtensile and soft bolts, rods, rivets, bars and chains Jaws are made of high-carbon alloy tool steel Maximum hardness of material to be cut: Rockwell C-48 Steel handles are angled with rubber hand grips for maximumleverage Exceeds Federal Specification No. GGG-C-740d Type II 36.2-in L x 7.4-in W x 2-in HNet/Gross weight 12.05-Lbs Capacity 5/8-inHandle length 36-inJaw color redJaw type center cutMaximum material hardness HRC-48 read more

Jet
Jet
$429.99
at CPO Jet

300 Series Quick Change Wedge Type Tool Post Set - 650300. Each set consists of one piston type tool post and one of each of 5 too...l holders. *1 Boring and Facing. *2 Boring, Turning and Facing. *4 Boring, Heavy Duty. *7 Universal Parting Blade. *10 Knurling, Facing and Turning. All working parts hardened and ground. Maximum rigidity for chatter-free performance. Holders fit ALLORRIS and YUASA tool posts. Increases productivity of all lathe operations. Completely sealed for maintenance free operation. Change tools in seconds. Fits 13 in. - 18 in. swing lathes read more

Jet
Jet
$549.99
at CPO Jet

400 Series Quick Change Wedge Type Tool Post Set - 650305. 400(CA) Series Tool Post Holder. *1 Boring and Facing. *2 Boring, Turni...ng and Facing. *4 Boring, Heavy Duty. *7 Universal Parting Blade. *10 Knurling, Facing and Turning. All working parts hardened and ground. Maximum rigidity for chatter-free performance. Holders fit ALLORRIS and YUASA tool posts. Increases productivity of all lathe operations. Completely sealed for maintenance free operation. Change tools in seconds. Fits 14 in. - 20 in. swing lathes read more

Jet
Jet
$149.99
at CPO Jet

JET 1/2 Heavy-Duty Ratchet WrenchSteel spring ball retainers for rapid socket changingVariable speed lever throttle for better spe...ed controlHardened steel gears for long tool lifeBall bearing construction throughout read more

Jet
Jet
$69.99
at CPO Jet

For cutting concrete reinforcing rods (rebar), medium tensile and soft bolts, rods, rivets, bars and chains  Special heat tre...ated jaws are made of high-carbon alloy tool steel  Maximum hardness of material to be cut: Rockwell C-48  Steel handles are angled with rubber hand grips for maximum leverage  Exceeds Federal Specification No. GGG-C-740d Type II read more

Jet
Jet
$269.99
at CPO Jet

RCB-16NDLX Rebar Cutter and Bend 5/8 CapacityJet rebar cutter/benders are designed for durability and easier operation. Jet rebar ...cutter/benders use a needle bearing design that makes for easy one-handed use when it is bolted down. The high-carbon alloy tool steel jaws and body permits cutting and bending of up to 5/8 inch round grade 60 rebar and bends up to 180 degrees.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet 220019 Features:High strength steel jaws permit the cutting of material up to a 48 Rockwell hardness for industrial applicationsMountable on a board or floor allows for one-handed operationCuts and bends up to 5/8 inch, grade 60 rebar for a variety of applicationsEasier cutting with the needle bearing design reduces operator fatigueJet 220019 Specifications:Warranty: 1 yearHeight: 4.6Width: 4.2Length: 9.3Product weight: 9 lbs read more

Jet
Jet
$999.99
at CPO Jet

Jet-1010 1 Square Drive Impact Wrench D-HandleJet impact wrenches are available in impact resistant aluminum or lightweight carbon... composite housings. Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet 505941 Features:Unique pinless hammer provides for stabilityDistinctive clutch design generates maximum powerVariable speed teasing throttleBuilt-in regulatorIncredible power-to-weight ratioCushioned grip dead handleSide-mounted bumper guardsJet 505941 Specifications:Warranty: 2 yearHeight: 14Width: 10Length: 13.5Product weight: 85.1 lbsNo load rpm: 4,100Air pressure: 90 psiAir consumption: 35 cfmAir inlet : 1/2Air hose inner diameter: 1/2Vibration value: 8 m/s2Square drive: 1Bolt capacity: 11/4Anvil retainer type: ring/ hole read more

Jet
Jet
$829.99 $669.99
at Sears Marketplace

Jet 707000. Features: Easy folding stand for convenient storage, quick setup and portability on the jobsite. Rubber hand grips on ...each end of the table allow you to conveniently carry without stand. Heavy-Duty 15 Amp motor with soft start. Aluminum extruded rails ensure a square fence and sliding precision. Large telescoping extension wing provides a wide 25 in. ripping capacity. Unique dust shroud design enhances dust and chip removal. Rear extension provides outfeed support and keeps the workpiece flat. New riving knife system complies with UL standards and prevents kickback. Sheet metal outfeed table with height adjustment supports long workpieces. read more

Jet
Jet
$1,219.99 $999.99
at Sears Marketplace

Jet 710116K. Features: Built-in 12 in. resaw capacity for cutting larger pieces of wood. 2-speed poly-v belt drive system. Newly d...esigned upper and lower cast iron frame for increased strength and rigidity. Easy to view blade tracking window. Blade guide post with rack and pinion adjustment. Upper and lower ball bearing guides reduce friction for longer blade life. Quick release blade tension for convenience. New enclosed stand with storage shelf and easy access door. Built-in retractable blade guard moves up and down from 0-12" resaw. New high tension spring design allows for greater blade tensioning. * Shown with optional fence - Sold separately . read more

Jet
Jet
$2,789.99 $2,294.99
at Sears Marketplace

Jet 708674PK. Features: Exclusive 30 in. Commercial XACTA, Fence II with T-square design. Quick-release riving knife greatly reduc...es binding and kickback risk. Push button arbor lock for rapid blade change. Shrouded blade increases dust collection efficiency. Standard 11 in. left and right cast-iron extension wings provides the largest table surface in its class. Poly-V drive belt system delivers efficient, quiet operation. Rail-mounted magnetic switch is easy to reach and provides overload protection. Enclosed cabinet with built-in sealed storage drawer. Hinged motor cover on cabinet gives quick access to the motor and belts. Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters. Heavy-duty chrome plated hand wheels contribute to smooth trunnion and arbor movement. Built-in 4 in. port for dust collection. Precision-ground, high-luster cast-iron table top with front edge bevel for hassle-free work piece positioning. Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning. Independent leaf safety guard protects operator from blade while cutting - even at a 45, tilt. Arbor wrench. Powder-coated paint for a long-lasting, chip-resistant finish. read more

Jet
Jet
$29.99 $27.98
at Sears Marketplace

Jet 587812. Features: For cutting concrete reinforcing rods (rebar), medium tensile and soft bolts, rods, rivets, bars and chains.... Jaws are made of high-carbon alloy steel. Can cut a maximum material hardness of Rockwell C-40. Steel handles are angled with rubber hand grips for maximum leverage. Exceeds Federal Specification No. GGG-C-740d Type II. read more

Jet
Jet

3/8 in. Air Ratchet Wrench - JSM-3330. Heavy-duty ball and needle bearing construction for durability. Hardened steel gears extend... tool life. Full gear cage construction increasing durability. Ergonomically designed grip for reduced operator fatigue. Built in air regulator for precise control. Exhaust silencer provides quiet operation. Swivel air inlet increases maneuverability and decreases hose tangles. Industrial duty air motor for increased power. Variable speed lever throttle for precise control read more

Jet
Jet

1/2 Impact Wrench 7000 RPMJet impact wrenches are available in impact resistant aluminum or lightweight carbon composite housings.... Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet JSM-4343 Features:Ergonomic grip for operator comfortJet JSM-4343 Specifications:Warranty: 1 yearHeight: 2.99Width: 7.68Product weight: 4 lbsNo load rpm: 7,000Air pressure: 90 psiAir consumption: 4 cfmAir inlet : 1/4Air hose inner diameter: 3/8Vibration value: 6-4/5 m/s2Noise level: 83 dbSquare drive: 1/2Bolt capacity: 5/8Anvil retainer type: ringFree speed: 7,000 rpmMax torque: 600 pound-force foot read more

Jet
Jet

24-Piece R8 Milling Tool Kit - 660220. 2 in. boring head with R8 shank. 5 HSS boring bars. 2-1/2 in. fly cutter with R8 shank. 3/8... in. HSS tool bit for fly cutter. R8 x MT3 adapter and 48 x JT6 adapter. R8 shank with blank end which can be machined for special uses. 3-piece edge finder set. Wiggler set. 3 hex key wrenches for all tool holders. Works with R8-spindle milling machines read more

Jet
Jet
$2,599.99
at Tyler Tool

Jet-5,000 1-1/2 Square Drive Impact Wrench D-HandleJet impact wrenches are available in impact resistant aluminum or lightweight c...arbon composite housings. Jet square drive impacts range from the mini 1/4 inch to the industrial 1-1/2 inches. Jets full line offering ensures there is an impact wrench to fill your needs.Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago.Jet 505955 Features:Unique pinless hammer provides for stabilityDistinctive clutch design generates maximum powerVariable speed teasing throttleBuilt-in regulatorIncredible power-to-weight ratioCushioned grip dead handleSide-mounted bumper guardsJet 505955 Specifications:Warranty: 2 yearHeight: 12.6Width: 8.1Length: 15.7Product weight: 30 lbsNo load rpm: 3,000Air pressure: 90 psiAir consumption: 44 cfmAir inlet : 1/2Air hose inner diameter: 3/4Vibration value: 8-3/10 m/s2Square drive: 1-1/2Bolt capacity: 2Anvil retainer type: holeWeight capacity: 12 tonsMinimum height: 9-2/3Maximum height: 18-2/3 read more

Jet
Jet

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable{mso-style-name:Table Normal;mso...-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-parent:;mso-padding-alt:0in 5.4pt 0in 5.4pt;mso-para-margin:0in;mso-para-margin-bottom:.0001pt;mso-pagination:widow-orphan;font-size:10.0pt;font-family:Times New Roman;mso-ansi-language:#0400;mso-fareast-language:#0400;mso-bidi-language:#0400;}JET 587818 Bolt Cutters For cutting concrete reinforcing rods (rebar), mediumtensile and soft bolts, rods, rivets, bars and chainsJaws are made of high-carbon alloy tool steel Maximum hardness of material to be cut: Rockwell C-48 Steel handles are angled with rubber hand grips for maximumleverage Exceeds Federal Specification No. GGG-C-740d Type II Net weight 3.97-LbsGross weight 4.4-LbsCapacity 5/16-inHandle length 18-inJaw color redJaw type center cutMaximum material hardness HRC-48 read more

Jet
View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping